|
| 1 | Demolition of brick work built in cement mortar including all quoins arches , pillers etc all as specified and directed |
| 2 | Dismantling , floor hearth or wall tiling including CM bedding (but not backing ) removing seviceable tiles to store & rubbish off the premises complete all as sepecified. |
| 3 | S&F 350 x 450 x 6 to 7 mm thick coloured ceramic tiles 1st quality) as on vertical surface set & jointed in neat cement slurry and pointed in white / coloured cement to match the tiles over and including 10mm thick plaster in CM (1:6) complete all as specified and directed. |
| 4 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over and including 15 mm thick screed bed in CM(1:4) complete all as specified and directed. |
| 5 | M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in floors etc set jointed in neat cement slurry and pointed in white or coloured cement match over and including 15 mm thick screed bed in CM(1:4) complete all as specified and directed. |
| 6 | M&L machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed bed 15 mm thick in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of flooring including rubbing and mirror polishing complete all as specified |
| 7 | M&L for preparation of old decorated surfaces of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots by brush,sand paper /mechanical means, surface to be repaired if required by filling wall care putty in holes /depressions etc to obtain uniform surface and applying two coat of cement base paint all as specified and directed. Note :- 1. Rates are inclusive for scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed. 2. All colour shall be factory made and no pigment to be used to make the desired shade at site. |
| 8 | M& L for preparation of old surfaces of wall and applying one coats of weather proof paint (exterior acrylic emulsion Paint )using hand roller over one coat of water based white pigment alkali resistant priming paint on facia, cornices, chajjas and balcony etc includding all necessary arrangement such as scaffolding / working platform for execution of work upto four storey building etc by skilled labour complete all as specified and directed.Note :- 1. Rates are inclusive for scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed. 2. All colour shall be factory made and no pigment to be used to make the desired shade at site.Make:- Apex shine of Asian Paint or anti dust of Berger or mica marble of nerolac or equivalent make as appoved by GE. |
| 9 | M& L for writing letters or figures (Block Roman, Italic or Indian) n.exc. 30 cm high by using of synthetic enamel paint including white enamal paint on base etc complete all as specified and directed. |
| 10 | M&L for preparation of old decorated surface by of wall (plastered or unplastered) including cornices pillasters and other wall features by brooming down smoke, soot moulds and efflorescent salt and trading oil or greasy spots,surface to be repaired if required by filling putty in holes/depressions to obtain uniform surface and applying one coat of white wash including scaffolding arrangement, trestles, ladders etc for working upto four storey all as specified and directed. |
| 11 | All as per Item No. 7 but two coat of white wash on wall complete all as specified and directed. |
| 12 | All as per Item No. 7 but one coat of white wash on ceiling complete all as specified and directed. |
| 13 | All as per Item No. 7 but two coat of white wash on ceiling complete all as specified and directed. |
| 14 | All as per Item No. 7 but one coat of distemper oil emulsion on wall complete all as specified and directed. |
| 15 | M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper on walls including one coat of alkali resistant wall primer complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered surfaces and and applying two coat of cement base paint complete all as specified and directed. |
| 18 | M&L for complete removal of existing treatment of wall including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces,surface to be repaired if required by filling wall care putty in holes/depressions to obtain uniform surface and applying two coats of oil bound distemper of approved tint over one coat alkali resistant wall primer complete . |
| 19 | M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces complete all as specified and directed. |
| 20 | AII as per serial Item No 19 above but one coat of synthetic enamel paint on steel surface complete all as specified and directed. |
| 21 | Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exe 1.50 SQM each complete all as specified and directed. |
| 22 | -ditto- all as per item No 21 above but exe 1.50 SQM but n .exe 4.00 SQM each. |
| 23 | Taking down shutters of any description exe 1.00 SQM but n.exc 2.00 Sqm each as directed. |
| 24 | - Ditto – all as per item No 23 above but exe 2.0 SQM each. |
| 25 | M&L for pressed steel frames for door with one or more rebates including necessary fixing lugs hinges locks strike plates etc size of frame 125 x 60mm complete all as specified and directed. |
| 26 | M&L for pressed steel frames for door with one Or more rebates including necessary fixing lugs hinges locks strike plates size of frame 105x 60mm complete all as specified and directed. |
| 27 | M& L for PCC 1:3:6 type using 20 mm graded stone aggregates C1 as in filling of steel chowkhats complete all as specified . |
| 28 | S&F 2nd class hard wood factory made plain framed panelled shutters 35 mm thick (any number of pannel) with panels of timber flats on both sides (feather edged) or of veneered particle board medium density , wood particle board with commercial face veneers complete all as specified and directed. |
| 29 | S&F 2nd class hard wood 35 MM thick glazed and skeleton shutters open rebated and prepared to revive glass ,gauze etc (with out sash bars) edges for framing plain chanferred or rounded fitted with cut and mitred beads for securing glass etc, size of member of shutter as specified in SSR part-I clause 8.24 (a) for doors completed as specified and directed. |
| 30 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed. |
| 31 | S&F factory made solid pannel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tube for , top and bottom rails , mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed togther with solvent cement , complete all as specified and directed |
| 32 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc. complete all as specified directed. |
| 33 | S&F powder coated (minimum thickness of powder coating 50 micron) aluminimum anodised door/window shutter openale / sliding type with aluminimum section weighing 0.55 kg/mtr incl necessay joining , cleats, glazing clips , rubber packing anodised aluminimum snap beading , screws handle tower bolt etc complete all as specified and directed. |
| 34 | S&F factory made steel windows with side hung shutter including projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded including taking down of existing steel windows complete all as specified and directed. |
| 35 | S&F factory made steel ventilators with top hung shelters incl hinge with steel handle and steel peg stay complete all as specified. Including taking down existing steel ventilators. |
| 36 | S&F MS framed work such as grills , gratings guard bars etc with ends of bars shouldred or riveted or forged into spikes and similar work conforming to FE-290 Gde E-165 complete all as specified and directed. |
| 37 | S&F 100 mm size MS butt hinges, medium weight all as specified. |
| 38 | S&F 300 mm long MS sliding door bolt plate type stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts fitted complete all as specified and directed. |
| 39 | S&F mild steel barrel tower bolt stove enamelled black with bright bolt 150 mm long complete all as specified and directed. |
| 40 | S&F mild steel pressed handle ovel type stove enamelled black with bright bolt 125 mm long complete all as specified and directed. |
| 41 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire with average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples fixed etc complete all as specified and directed. |
| 42 | M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 43 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 44 | S&F mild steel spring 300 mm long , ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden /angle iron chowkat complete all as specified and directed. |
| 45 | S&F aluminimum, anodised, barrel tower bolt 150 mm long complete all as specified and directed. |
| 46 | S&F 300 mm long aluminium, anodised sliding door bolt with hasp, and staple bolt type and fixing clips of sheet , cast or extruded sections complete all as specified and directed. |
| 47 | S&F aluminium , anodised bow handle 125 mm long complete all as specified and directed. |
| 48 | S&F 4.00 mm thick sheet glass of ordinary quality and glazing with oil putty in square or fixed with beads in squares nexe 0.50 SQM in each pane complete all as specified and directed. |
| 49 | M&L for brick work with sub class ' B ' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 50 | Taking down cement lime or cement plaster on brick or stone walls including raking out joints hacking for key, scrubbing down with water complete all as specified and directed. |
| 51 | M&L for rendering 15mm thick in cement mortar 1:6 on wall of brick work or concrete surfaces finished even and smooth complete all as specified and directed. |
| 52 | M&L for rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surfaces finished even and smooth complete all as specified and directed. |
| 53 | M&L rendering 5 mm thick in cm 1:3 on ceiling of concrete / brick surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 54 | S&F in repair pressed steel cup board shutters with frame , the frame shall be made of 1.25 mm thick and shutter made of 1.00 mm thick PBI sheet with 6 Nos 100 mm long steel hinges , Godrej pattern locking arrangement including 12mm dia vertical rod all as per TD drg No CEJZ /TD 2004/29 . The surfaces shall be spary painted with two coat of synthetic enamel paint over a coat of zinc chromate primer over cleared surface complete all as specified and directed and shown on drawing. Note :- The total width including frame shall be measured flat and shall be paid accordingly. |
| 55 | S&F 4.00 mm thick frosted glass of ordinary quality and glazing in square n. Exc 0.5 sqm in each pane complete all as specified and directed. |
| 56 | Hacking out old broken glass (any thickness, size, quality , description) from metal /wood frame including punching or drilling out old glass panes, pins, springs clips & S&F 3.00 mm thick sheet glass of ordinary quality and glazing in square complete all as specified and directed. |
| 57 | Hacking out old broken glass (any thickness, size, quality , description) from metal / wood frame including punching or drilling out old glass panes, pins, springs clips & S&F 3.00 mm thick frosted glass of ordinary quality and glazing in square complete all as specified and directed. |
| 58 | Demolition of cement concrete in ground floor n. exc 15 cm thickness below or above the ground level. |
| 59 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 60 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 litres capacity including dismantling of old water tank complete all as specified and directed. |
| 61 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 litres Capacity including Dismantling of old water tank |
| 62 | S&F in repair Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 63 | S&F in repair Ball brass valves 25mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 64 | S&F in repairs chromium plated fancy type Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | S&F in repairs Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 66 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore including taking up or down old steel tubing & connections complete all as specified and directed. |
| 67 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore including taking up or down old steel tubing & connections complete all as specified and directed. |
| 68 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 25mm bore including taking up or down old steel tubing & connections complete all as specified and directed. Please Enable Macros to View BoQ information |
| 69 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 25mm bore including taking up or down old steel tubing & connections complete all as specified and directed. Please Enable Macros to View BoQ information |
