Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge including carriage of material in all leads and lifts. Nominal concrete 1:3:6 or richer mix (i/cequivalent design mix) |
| 2 | Demolisging RCC work Manually Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge including carriage of material in all leads and lifts. |
| 3 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer- in-charge including carriage of material in all leads and lifts. |
| 4 | Extra for scrapping, cleaning and straighteningreinforcement from R.C.C. or R.B. work including carriage of material in all leads and lifts. |
| 5 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking in all leads & lifts. Area beyond 3 Sqm. |
| 7 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within all leads and lifts. Sectional area below 40 Square Centimeters |
| 8 | Dismantling steel work inbuilt up sections inangles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. Including dismem bering and stacking in all leads and lifts. |
| 9 | Dismantling tile work in floors, Walls and roofs laid in cement mortar including stacking material with all leads and lifts. |
| 10 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material in all leads and lifts. G.S. Sheet |
| 11 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking in all leads and lifts. |
| 12 | Up to 10 mm thick |
| 13 | Thickness above 10 mm up to 25 mm |
| 14 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials in all leads and lifts. |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground in all leads ad lifts |
| 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge upto all leads and lifts. |
| 17 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains in all depth, all kind of soil including saturated soil comprising of pick wok, jumper work where blasting is prohited in soft and hard rock and their intermiate classification of soils including dewatering wherever required, setting out to required lines, levels as shown shown on the drawing as directed by the engineer in charge at site, according to the HPPWD specification of 1990 vol-1 as sorting out use full and unuseful material and stacking the same in all lead and lift and leveling of excavated earth on dumping sites (to be arranged by the contractor at his own risk and cost including payment of prescribed dumping charges of municipal committee/local body if any) through all modes of transportation including head load animal load and mechanical to maximum possible extends in all leads means along with levelling fine dressing and all labour, machinery, materials, tools equipments and safty measure and incidentels necessary to complete the work by mechanized means and labour (if any required). All useful materials such as stone, shingles, aggregate and slates shall be sorted along road site and lift through all modes of transportation and used/removed as direction of the engineer in charge. Any loss to the private and public property during the course execution will be restored by the contractor whatsoever the nature of the same may be the usable aggregate/ boulder /cutstone shall be taken in MAS Account anf further will be issued to the contractor as per issue rate mentioned under condition No. 46 of NIT form 6. |
| 18 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete including carriage of mateial in all leads and lifts. |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of mateial in all leads and lifts. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to1:5:10 (1 cement : 5 coarse sand): 10graded stone aggregate 40 mm nominal size) including carriage of mateial in all leads and lifts. |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:8:16 (1 Cement : 8 coarse sand) : 16 graded stone aggregate 40 mm nominal size) including carriage of mateial in all leads and lifts. |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of mateial in all leads and lifts. |
| 23 | Providing and laying of synthetic Polyester triangular fibre of length 12mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete (Outer surface plaster) by using 125gms of synthetic Polyester triangular fibre for 50 Kg cement used as per directions of Engineer-in-Charge. |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form work including carriage of mateial in all leads and lifts. |
| 25 | Foundations, footings, bases of columns, etc. for mass concrete |
| 26 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc |
| 27 | Suspended floors, roofs, landings, balconies and access platform |
| 28 | Shelves (Cast in situ) |
| 29 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 30 | Edges of slabs and breaks in floors and walls up to any width. |
| 31 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding with PVC cross lock all complete including cost of binding wire upto all level including carriage of mateial in all leads and lifts. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 32 | Providing and laying in design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge including carriage of mateial in all leads and lifts. |
| 33 | All works upto plinth level |
| 34 | All works above plinth level upto floor all level |
| 35 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of mateial in all leads and lifts. |
| 36 | Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade including carriage of mateial in all leads and lifts.: One face dressed |
| 37 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, mouldingand polishing to edges to give high gloss finish etc. complete at all levels including carriage of mateial in all leads and lifts.Granite of any colour and shade |
| 38 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including carriage of mateial in all leads and lifts.(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. (d) The Contractor shall provide curtain wall/soffit/facia/ceilling with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. |
| 39 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of mateial in all leads and lifts. Sal Wood |
| 40 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including carriage of mateial in all leads and lifts.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 41 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of mateial in all leads and lifts. 25 mm dia |
| 42 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of mateial in all leads and lifts. |
| 43 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screwsetc. Complete including carriage of mateial in all leads and lifts. |
| 44 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete including carriage of mateial in all leads and lifts. |
| 45 | Fixing bright/ matt finished stainless steel tower bolts of approved quality & make with necessary screws etc complete including carriage of mateial in all leads and lifts. |
| 46 | 300x10mm |
| 47 | 200x10mm |
| 48 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of mateial in all leads and lifts. Twin rubber stopper |
| 49 | Providing and fixing WPC doors frames 100mmx63mm (Single Rebate) having density 750kg/cum or more, fixed in position with Screws /dash fashner all complete as directed by Engineer-in-site, including carriage of material in all leads and lifts. |
| 50 | Providing and fixing factory made uPVC window frame and shutters made of uPVC extruded sections profile colour white Mesh system NCL Veka-160 sliding series type (3) SS 304 Mesh, handle Type & colur White with panel insertion of 5 mm toughened glass including all fixtures/fittings as required excluding grill including labour for fixing, loading/ unloading of material and carriage of material from manufacturer to site of work complete in all respects as per manufacturer's specification and direction of Engineer-in-charge including carriage of material in all leads and lifts. |
| 51 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete including carriage of mateial in all leads and lifts. 2nd class teak wood 50x12 mm |
| 52 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete i/c carriage of material in all leads and lifts. Fixed to window |
| 53 | Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (for bathroom, W.C. doors and Cup Board) using synthetic rubber based adhesive including carriage of mateial in all leads and lifts. |
| 54 | Providing and fixing 19mm thick commercial board water proof in shelves for cup boards with butt joints and fixing with nails and screws etc. including 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of mateial in all leads and lifts. |
| 55 | Providing and fixing wooden plank ceiling with tounged and grooved and joiniting and wood screws (frame work and cover fillets to be meaured and paid for separately) complete as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts. . 1st Class Indian Teak wood 12mm thick |
| 56 | Providing and fixing 10mm thick Eco -pinewood on ceiling with necessary screws complete in all respects including carriage of material in all leads and lifts |
| 57 | Providing and fixing 6mm thick Commercial ply wood for panelling & ceiling of approved qualilty with butt jointing and nails(frame work and cover fillet to be paid for separately) including carriage of material in all leads and lifts |
| 58 | Providing and fixing 75mmx60mm rounded hand rail in straight length complete including carriage of material in all leads and lifts. 1st classs indian teak wood. |
| 59 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts |
| 60 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of material in all leads and lifts |
| 61 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete including carriage of material in all leads and lifts. Hot finished welded type tubes |
| 62 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including carriage of material in all leads and lifts |
| 63 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 64 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, complete in all respect including carriage of material in all leads and lifts |
| 65 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete including carriage of material in all leads and lifts |
| 66 | Providing and fixing 2.00 mm thick PVC antistatic venyle flooring plain or coloured, carbed or mosaic /mettaled finish laid with approved adhesive on sub floor complete including carriage of material in all leads and lifts. |
| 67 | P/F laminated wooden flooring AC-4, 8mm thick EH 13329, 1215x195x8.3mm HDFE (high density) 860-900 Kg/sqm, complete including carriage of material in all leads and lifts. |
| 68 | Providing and fixing 3 mm thick rubber tile flooring. plain, coloured,corbed, or mosaic or mattledfinish. laid with approved adhesive on sub floorcomplete (sub- floor incuding damp proofing treatment to bemeasured separately for payment) including carriage of material in all leads and lifts. |
| 69 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles of any size of approved shade and colour in flooring, treads of steps and landings laid over 20mm thick cement mortar 1:4 (1 cement : 4 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of material in all leads and lifts. |
| 70 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 71 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 72 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, i/c carriage of material in all leads and lifts. (i) Single socketed pipes. 110 mm diameter |
| 73 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. i/c carriage of material in all leads and lifts. Coulpler 110mm dia |
| 74 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. i/c carriage of material in all leads and lifts. Bend 87.5°. 110mm dia |
| 75 | Shoe (Plain) 110 mm Shoe |
| 76 | Providing and fixing precoated galvanised iron profile sheets prepainted coloured sheet (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i/c carriage of material in all leads and lifts. |
| 77 | Providing and fixing precoated galvanised steel sheet, prepainted coloured sheetroofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete i/c carriage of material in all leads and lifts. Ridges plain (500 - 600mm) & Valley |
| 78 | Flashings/ Aprons.( Upto 600 mm) |
| 79 | Gutter (600 mm over all girth) |
| 80 | Providing and fixing Aluminium Double bubble thermal insulation sheet 300 GSM, 8mm thick including carriage of material in all leads and lifts. |
| 81 | Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceilng and held in position by criss-crossing Gl wire i/c carriage of material in all leads and lifts. |
| 82 | 15 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)for interior / exterior wall surfaces up to all floor level including arrises, internal rounded angels,chamfers and or rounded angels not exceeding 80mm in girth and finished even and smooth complete in all resect i/c carriage of material in all leads and lifts. |
| 83 | Finishing walls with Ducco Paints. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. i/c carriage of material in all leads and lifts. |
| 84 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per specifications i/c carriage of material in all leads and lifts: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. .Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 85 | Providing and applying Polish on outer wall on brick & stone work of approved brand and manufactured including carriage of material in all leads and lifs. |
| 86 | Melamine polishing on wood work (one or more coat) on eco pine wood panelling inlcuding carriage of material in all leads &lifts. |
| 87 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complet .inlcuding carriage of material in all leads &lifts. |
| 88 | Stone soling properly hand packed filling interstices with spalls and consolidating with hand ramming including spreading watering and rolling of binding materials moorum or earth etc. complete as per H.P.P.W.D. specifications inlcuding carriage of material in all leads &lifts. |
| 89 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding i/c carriage of material in all leads and lifts. |
| 90 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.i/c carriage of material in all leads and lifts. 60 mm thick C.C. paver block of M-35 grade with approved color design and pattern. |
| 91 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) i/c carriage of material in all leads and lifts. : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 92 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): i/c carriage of material in all leads and lifts. With Toughned glass panes of 8 mm thickness weight not less than 20.00 kg / sqm |
| 93 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. i/c carriage of material in all leads and lifts. Upto 5mm depth and 5 mm width |
| 94 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge i/c Door handle, lock and stopper etc complete in all respects i/c carriage of material in all leads and lifts. |
| 95 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofingcompound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheetshould be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) i/c carriage of material in all leads and lifts |
| 96 | Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately) inlcuding carriage of material in all leads and lifts |
| 97 | Construction of V shape drain of cement concrete (1:2:4 graded stone aggregate 20mm nominal size) 45cm wide, 30cm height and 7.5cm thick over base concrete 1:6:12 graded stone aggregate 40mm nominal size including cost of form work with steel plates and excavation in all kind of soils upto any depth and disposal of all excavated earth in all leads and lifts as per direction of Engineer in charge i/c carriage of material in all lead and lifts. |
| 98 | Providing precast Glass reinforced concrete jail approved design $shade approvedby the engineer in Charge including centering, and shuttering , roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand ) etc . Complete, excluding plastering of the jambs , sills and soffits. i/c carriage of material in all lead and lifts. |
| 99 | Fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: i/c carriage of material in all leads and lifts.White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 100 | Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : i/c carriage of material in all leads and lifts. Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern |
| 101 | Fixing white vitreous china Division plate (690x 165 x 325mm) for urinal including painting of fittings, cutting and making good the walls and floors wherever required. i/c carriage of material in all leads and lifts. |
| 102 | Fixing wash basin of standard pattern, including , cutting and making good the walls wherever required i/c carriage of material in all leads and lifts. |
| 103 | Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings i/c carriage of material in all leads and lifts. |
| 104 | Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with stainless steel plug 40 mm, including , cutting and making good the walls wherever required : i/c carriage of material in all leads and lifts. Single/ Double Bowl |
| 105 | Fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 106 | fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete i/c carriage of material in all leads and lifts. Flexible pipe 32 mm dia. |
| 107 | Fixing 100 mm steel grating or nahani trap i/c carriage of material in all leads and lifts. |
| 108 | Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape 450x350 mm (outer dimensions). |
| 109 | Fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 110 | Fixing toilet paper holder : C.P. brass i/c carriage of material in all leads and lifts. |
| 111 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete i/c carriage of material in all leads and lifts. 110 mm X 75 mm |
| 112 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 113 | 110 mm dia. |
| 114 | 75 mm dia. |
| 115 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 116 | 110 mm dia. |
| 117 | 75 mm dia. |
| 118 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 119 | 110 mm dia. |
| 120 | 75 mm dia. |
| 121 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 122 | 110 mm dia. |
| 123 | 75 mm dia. |
| 124 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 125 | 110 mm dia. |
| 126 | 75 mm dia. |
| 127 | Providing and fixing PVC Double equal branch with oval access door ISI marked of approved design with steel screws and rawal plugs etc. complete i/c carriage of material in all leads and lifts. |
| 128 | 110 mm dia |
| 129 | 75 mm dia. |
| 130 | Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete i/c carriage of material in all leads and lifts. |
| 131 | 110 mm dia |
| 132 | 75 mm dia. |
| 133 | Providing and fixing air admitave valve (cowel) ISI marked including fixing with approved adhesive etc complete i/c carriage of material in all leads and lifts. |
| 134 | 110 mm dia. |
| 135 | 75 mm dia. |
| 136 | Fixing liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour i/c carriage of material in all leads and lifts. |
| 137 | Fixing towel ring round shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms i/c carriage of material in all leads and lifts. |
| 138 | Fixing 450 mm long C.P. towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms i/c carriage of material in all leads and lifts. |
| 139 | Fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.i/c carriage of material in all leads and lifts. |
| 140 | Fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws i/c carriage of material in all leads and lifts. |
| 141 | Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge i/c carriage of material in all leads and lifts.1216 (16 mm OD) pipe |
| 142 | Providing and fixing ball valve (brass) of approved quality, , with plastic floats complete i/c carriage of material in all leads and lifts. : 15 mm |
| 143 | 25mm nominal size |
| 144 | Providing and fixing gun metal non- return valve of approved quality (screwed end) i/c carriage of material in all leads and lifts.25 mm nominal bore Vertical. |
| 145 | Fixing uplasticised PVC connection pipe with brass unions :45 cm length i/c carriage of material in all leads and lifts. |
| 146 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete i/c carriage of material in all leads and lifts.15 mm nominal bore |
| 147 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipesincludingnecessary fittings fittings and the base support for tank i/c carriage of material in all leads and lifts. |
| 148 | Fixing C.P. brass bib cock of approved quality i/c carriage of material in all leads and lifts. 15mm dia. |
| 149 | Fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms i/c carriage of material in all leads and lifts. 15 mm nominal bore. |
| 150 | Fixing Mixer for kitchen sink with casted swinging spout at top i/c carriage of material in all leads and lifts. |
| 151 | Fixing C.P. brass stop cock (concealed). 15 mm nominal bore i/c carriage of material in all leads and lifts. |
| 152 | Fixing C.P. brass angle valve for basin mixer and geyser points i/c carriage of material in all leads and lifts.. 15mm nominal bore. |
| 153 | Fixing C.P. Brass extension nipple (size 15mmx50mm) i/c carriage of material in all leads and lifts. |
| 154 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms i/c carriage of material in all leads and lifts. |
| 155 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 i/c carriage of material in all leads and lifts. |
| 156 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall i/c carriage of material in all leads and lifts.15 mm dia nominal bore |
| 157 | 25 mm dia nominal bore |
| 158 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete i/c carriage of material in all leads and lifts. 25 to 40 mm nominal bore |
| 159 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket i/c carriage of material in all leads and lifts.150 mm dia pipes |
| 160 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :150 mm dia Ductile Iron Class K-9 pipes i/c carriage of material in all leads and lifts. |
| 161 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 i/c carriage of material in all leads and lifts. |
| 162 | Extrar depth for manholes : Size 90x80 cm. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 i/c carriage of material in all leads and lifts. |
| 163 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete i/c carriage of material in all leads and lifts. For pipes 100 to 250 mm diameter |
| 164 | Chipping of Plaster/Concrete Upto cover: Chipping of plaster/concrete upto cover only for making better bonding in between old and new concrete including tapering all edges upto any thickness inlcuding carriage of material in all leads and lifts. |
| 165 | P & F of Extra 8mmX 120MM deep L-type shear rebar connector 10mm Providing extra rebar with Hilti RE 500 V3 or equivalent chemical including power drilling ,cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond and straightning, cutting , bending, placing in position, binding with GI wire of 18 gauge. Complete in all respects excluding the cost of steel. inlcuding carriage of material in all leads and lifts. |
| 166 | P & F of Extra rebar 16mm dia*300mm depth Vertically: Providing extra rebar with Hilti RE 500 V3 chemical or equivalent including power drilling ,cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond and straightning, cutting , bending, placing in position, binding with GI wire of 18 gauge. Complete in all respects excluding the cost of steel i/c carriage of material in all leads and lifts. |
| 167 | P, M & A of epoxy resin concrete:Providing, mixing & applying two component epoxy resin concrete bonding coat on prepared Rcc surfaces as per manufacture specification excluding preparation of surface by chipping and thoroughly cleaning of surface complete wherever required. Product: Sikadur 32 .or equivalent Consumption:0.4kg/m2.Product requirements: Complies with ASTM C 881 Type II i/c carriage of material in all leads and lifts. |
| 168 | S & A of non-shrink cement micro concreteSupply and apply a ready to use non shrink, cementitious free flow microconcreteProduct: SikaRep Microcrete-4/or equivalent Yield: Approx 17ltr/bag(30kg)Product requirements:Compressive strength>60 N/mm2(28 days) according to ASTM C 1107-99 i/c carriage of material in all leads and lifts. |
| 169 | Repair of cracks in RCC Member Makeing 'V' groove of 10mm wide and 10mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower as directed by Engineer-in-charge. i/c carriage of material in all leads and lifts. |
| 170 | Epoxy injection in RCC Member Drilling and fixing injection packers in RC members including, Drilling Holes: Drilling holes in structural members at the intervals as per recommendation of engineer in charge.Cleaning of holes: Clean the holes by air blower prior to fixing nozzles.Fixing of Packers: Insert 12 mm dia., 50~75 mm non corrosive type long injection packers in cleaned holes with mositure insensitive epoxy resin based putty or equivalent.Cutting of Packers: Cut the packers by cut of wheel after completion of grouting without damaging structural elements. i/c carriage of material in all leads and lifts. |
| 171 | Supply a moisture intensive, epoxy resin based injection grout for wet or damp location. Product: Conbextra ep 10/ Sikadur 55 SLVor equivalentMixed Density: 1.14 kg/l at 27 deg celciusProduct requirements: bond strength >10 N/mm2 or concrete failure according to ASTM C 882 at 30 deg celcius; compressive strength >85 N/mm2 according to ASTM C 579. i/c carriage of material in all leads and lifts. |
| 172 | For Repair of Hair line cracks in the Brick wall Supply and apply of non shink repair mortar for non-moving cracks in plaster and walls. Product:Sika Cracksil..or equvlent Density: 0.85 Kg/l at 270C i/c carriage of material in all leads and lifts. |
| 173 | Supply & Apply of ready to use water resistant White Cement based finishing / smoothening material in 1.5mm thickness for indoor and outdoor plastered surfaces. Product: Sika or equivalent Wall Décor, System Requirement: Tensile Adhesion >1.0 N/mm2 at 28 days (According to EN 1348), Water Capillary Absorption 0.8ml at 24hrs as per Karsten Tube Test, Water Retentivity >98% (According to EN 196-3) i/c carriage of material in all leads and lifts. |
| 174 | Patch and Repair Mortar Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar for a thickness of 40mm or as directed by Engineer-in-charge. Product: Sika MonoTop®-122 F. Yield: approx. 0.84 ltr/kg.or equivalent System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79 i/c carriage of material in all leads and lifts. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
