|
| 1 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl nainital, AC Sheets or similar pattern as in roof coverings. |
| 2 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work). |
| 3 | Ditto in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section unframed work. |
| 4 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 5 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote oil complete all as specified and directed. |
| 6 | M&L for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed. |
| 7 | Fixing only for wrought second class hard wood in scantlings framed and fixed complete all as specified and directed. |
| 8 | S&F 20mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 20 cm for wooden flooring etc complete all as specified and directed. |
| 9 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 10 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 11 | S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed. |
| 12 | S&F framed work as in doors , gates or tank staging of angle or other section for fixing of sheets and similar works complete of Gde Fe-290(Gde E-165) all as specified and as directed. |
| 13 | M&L for roof truss (framed) trussed, purlin etc of angle or other section for refixing of sheets and similar works complete of Gde Fe-290 (Gde E-165) all as specified and directed. |
| 14 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.00 sqm but n.exc 4 sqm each including make good and complete all as specified and directed. |
| 15 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 16 | S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 17 | S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides complete all as specified and directed. |
| 18 | S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged all as specified and directed. |
| 19 | M&L for 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 20 | Taking down shutters of any description but not exc 1 Sqm each complete all as specified and directed. |
| 21 | M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 23 | Taking down chowkhat with shutter (without taking off shutter from the frame) but n.exc 1.5 sqm each including make good and complete all as specified and directed. |
| 24 | S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I. |
| 25 | S&F pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed. |
| 26 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed. |
| 27 | S&F Extruded aluminium alloy handles, fabricated type, anodised 125mm complete all as specified and directed. |
| 28 | S&F aluminium anodised barrel bolts and fixed of 150 mm length complete all as specified and directed. |
| 29 | S&F for 4 leversBrass Mortice lock,vertical type,100mm length complete all as specified and directed. |
| 30 | S&F for 50mm dia cupboard polished hardwood knobs fixed with screws complete all as specified and directed. |
| 31 | S&F Satinless steel Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and directed. |
| 32 | S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 250mm complete all as specified and directed. |
| 33 | S&F powder coated anodized aluminium frame for doors/windows /ventilators/, partitions with one or more rebates including joining cleats for fixing to existing tiled/concrete floring as required. etc complete all as specified and as directed. (Note : Any damage made to existing flooring with fixing frames shall be made good by contractor without any extra cost and match with existing flooring) |
| 34 | S&F Power coating, anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and directed. |
| 35 | S&F Powder coating anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and directed. |
| 36 | S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed. |
| 37 | M&L 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified and directed. |
| 38 | S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed complete all as specified and directed. (ISI Marked) |
| 39 | Dismantling boarding any description fixed in any position with nails |
| 40 | M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed . |
| 41 | M&L 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work ® Plywood, grade BWP, complete all as specified and as directed . |
| 42 | M& L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions. |
| 43 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed. |
| 44 | S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) |
| 45 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed. |
| 46 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets. |
| 47 | S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness Aluminium frame will be 60 x 60 cm to recieve ceiling board complete all as specified and as directed. |
| 48 | M&L for 4mm E boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 50 | M&L for Non skid light shade, joint free ceramic tiles, 7 to 8 mm thick square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 51 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed |
| 52 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 53 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 54 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 55 | M&L for machine pressed pre polished chequered cement concrete tiles 300x300x25mm thick over 15mm thick screed bed in CM 1:6 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified and directed. |
| 56 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed. |
| 57 | M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in hardstanding, path, plinth protection, sub-floors etc finished even and fair or even and rough as reqd complete all as specified and directed. |
| 58 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified an directed. |
| 59 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 60 | Demolition of precast concrete block walling built in cement mortar complete all as directed. |
| 61 | M&L Precast cement concrete block masonry with solid block exc 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed. |
| 62 | M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed. |
| 63 | Demolition of reinforced cement concrete of any description in any position not otherwise described. |
| 64 | M&L Precast RCC cover slab (1:2:4) type B1 using 20mm graded stone aggregate) and set in CM (1:6) complete all as specified and directed. |
| 65 | M & L TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire not less than 0.90 mm dia on securing with clips complete all as specified and directed. |
| 66 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 67 | M&L for rendering 15mm thick in CM (1:4) in two coats (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 68 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed. |
| 69 | Supply only integral WPC (ISI Mark) |
| 70 | M&L for preparation of old plastered surfaces of wall and applying two coats of cement based paint over a coat of primercomplete all as specified and directed. |
| 71 | M&L for preparation of old plastered surfaces of wall and applying one coats of cement based paint over a coat of primer complete all as specified and directed. |
| 72 | M&L for preparation of old plastered surfaces of wall and applying one coats of cement complete all as specified and directed. |
| 73 | M&L for preparation of old plastered surfaces of wall and applying two coats of cement based complete all as specified and directed. |
| 74 | M&L for preparation of new plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 75 | M&L for preparation of old plastered surface of walls and applying two coats of acrylic distemper over a coat of alkali resistant priming paint complete all as specified and directed. |
| 76 | S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia complete all as specified and as directed. |
| 77 | S&F in repairs Urinal spreader chromium plated and fixing with 15 mm dia pipe complete all as specified and directed. |
| 78 | S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repairs urinal partitions slabs terminating about 40cm above floor line, fixed in repair complete all as specified and directed. |
| 80 | S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 81 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 82 | S&F in repair 75mm dia PVC (SWR) floor trap including jointing to pipe complete all as specified and directed. |
| 83 | S&F in repair for grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed. |
| 84 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 85 | S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern all as specified and directed. |
| 86 | S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets all as specified and directed |
| 87 | S&F in repair Bip tap, chromium plated, 15mm fancy type complete all as specified and directed. |
| 88 | Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified and directed. |
| 89 | Taking up or down steel tubing and connectionfor 20 mm bore of pipes complete all as specified and directed. |
| 90 | S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed. |
| 91 | S&F GI tubes, medium grade galvanised, 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 92 | S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed. |
| 93 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 94 | S&F in repair 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 95 | S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed |
| 96 | S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs incl dismantling of old unservicable water tank of any capacity all as specified and directed |
| 97 | S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed. |
| 98 | S&F in repairs 20 mm dia gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve complete all as specified and directed. |
| 99 | S&F in repair PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed. |
| 100 | S&F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete all as specified and directed. |
| 101 | S&F in repair PVC(SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls/floor complete including clamps for securing pipe complete all as specified and directed. |
| 102 | S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 103 | S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed. |
| 104 | S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed. |
| 105 | S&F in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed. |
| 106 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 107 | S&F 300mm long MS Helical door spring Welded to steel /Fixed to wooden door frame including roller and roller plate etc of approved quality complete all as specified and directed. |
| 108 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed. |
| 109 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 110 | M&L for 3mm thick sheet glass ordinary quality and glazing with wooden beading in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 111 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 112 | M&L for preparation of old wall surface and applying two coats of oil bound distemper complete all as specified and directed. |
| 113 | M&L for preparation of old wall surface and applying one coats of oil bound distemper complete all as specified and directed. |
| 114 | M&L for preparation of old wall surface and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed. |
| 115 | M&L for preparation of old wall surface and applying one coats of oil bound distempering over a coat of primer complete all as specified and directed. |
| 116 | S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 117 | S&F vitreous china bowl urinal flat back full stall type white (excluding flushing cistern flush pipe and waste pipe) complete all as specified and as directed. |
| 118 | S&F vitreous China clay wash hand basin of size 550x400mm with pedastal incl brackets for fixing complete all as specified and as directed. |
| 119 | S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete all as specified and directed. |
| 120 | S & F in repairs Towel rack 600mm long with lower hangers , stainless steel complete all as specified and directed. |
| 121 | S&F in repairs vitreous China clay table top WHB of size 700x435x135 mm incl cp waste coupling complete all as specified and as directed. |
| 122 | S&F in repairs Brass CP 2-in-1 Bibcock with flange of complete all as specified and as directed. |
| 123 | S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses complete all as specified and directed. |
| 124 | S&Fin repairs 15 mm bore CP health Faucet with Flexible pipe 1 m long complete all as specified and as directed. |
| 125 | S&F in repairs Soap dish holder complete all as specified and as directed. |
| 126 | S&F in repairs Toilet roll holder with stainless steel flap complete all as specified and as directed. |
| 127 | S&Fin repairs Towel ring square shape stainless steel complete all as specified and as directed. |
| 128 | S&F in repairs corner glass shelf with bracket of complete all as specified and as directed. |
| 129 | S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & over head shower) complete all as specified and directed. |
| 130 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour complete all as specified and directed. |
| 131 | M&L for 18/20mm thick granite slab ( as in table top rubbed and polished) as in kitchen plateform/wall/Cills/counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed. |
| 132 | Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed. |
| 133 | Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed. |
| 134 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed. |
| 135 | M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth over 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete all as specified and as directed. |
| 136 | S&F in repairs 20 mm dia harrison rails,(Curtain Rod) chromiun plated with wooden finished fancy type with fixing brackets stops , rollers etc complete all as specified and directed. |
| 137 | S&F in repairs 20 mm dia double rod brackets stops , rollers etc wooden finished all as directed and specified. |
| 138 | Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 250 nexc 500 ltrs incl writing \\"TC on -DD/MM/YY\\" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed. |
| 139 | Cleaning and removing all scale and dirt, etc, from PVC/RCC/MS over head tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and from mouths of circulating pipes, etc after Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position of capacity exc 500 nexc 1000 ltrs incl writing \\"TC on -DD/MM/YY\\" with white synthetic enamel paint with 5 CM font in capital letters complete all as specified and directed. |
| 140 | M&L for preparation of old wall surface by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and applying two coat of cement base paint complete all as specified and as directed roller finish. |
| 141 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and as directed. |
| 142 | S & F in repair Brass CP sink mixer with swinging Spont for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 143 | S & F in repair Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 144 | S & F in repair corner glass shelf with bracket complete all as specified complete all as specified and as directed. |
| 145 | Repair to damaged roof after complete removal existing treatment including padding, cleaning. the surface using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated:-(i) Applying one coat of bituminious primer. (Note:- Bituminous primer shall be 'TANK MASTIC' manufactured by M/S STP Ltd or \\"EMUFALTE\\" Manufactured by M/s Texsa India Ltd)(ii) Supply and laying 3 mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.00 Kg/Sqm reinforced with non-woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrance shall be taken to a height of 75mm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note:- Laying APP based polymeric membrane shall be done torch on method as per manufacturers instructions |
| 146 | M&L for Rendering 15mm thick on fair faces of concrete surface in CM (1:4) finished even and smooth without using extra cement incl WPC @ 3% by weight of cement all as specified and directed.Note:- WPC paid and measured seprateley. |
| 147 | M & L for PCC (1:2:4) type B1 (20 mm graded stone aggregates) as in roof kerbs, sloping padding in roof slab or mud stops, rounded or chamfered on edges complete all as specified and directed. Please Enable Macros to View BoQ information |
