|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Cleaning of old surface by scraping the entire old white wash and colour wash including cost of scaffolding all complete job as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.9 |
| 3 | Providing and applying white cement based wall putty of average thiickness 1mm of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth complete job as per building specification and direction of E/I.D.S.R. Item No. - 13.80 |
| 4 | Extra for each coats of washing over exterior surface for each consecutive floor above first floor including scaffolding etc. All complete as per specification & direction of E/I.B.C.D. S.O.R. Item No. 5.8.10 |
| 5 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litreD.S.R. Item No. - 13.85.3 |
| 6 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaningand preparing the walls,scaffolding,washing of floors and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.20 |
| 7 | Providing two coat of synthetic enamel paint over steel surface with complete job as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.10 |
| 8 | Providing and fixing Granite of any colour and shade18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with white cement slurry including rubbing, curing, moulding and polishing to edges to give high gloss finishat all levels. etc. complete.D.S.R. Item No. 16.86.1 |
| 9 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge,clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mmDSR Item No. - 11.41A.3.1 |
| 10 | Providing and fixing Ist quality ceramic IS: 15622 (thickness to be specified by the manufacturer), of approved glazed wall tiles conforming to any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.B.C.D. S.O.R. Item No. 5.6.23.4 |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.18.7.2 - 20 mm nominal outer dia Pipes |
| 12 | 18.7.3 - 25 mm nominal inner dia Pipes |
| 13 | 18.7.4 - 32 mm nominal outer dia Pipes |
| 14 | Providing and fixing male ended 15mm brass bib cock of approved quality and colour, (weight not less than 350gms) with extra socket complete job as per specification and direction of E/I.DSR Item No. - 18.54.2 |
| 15 | Providing and fixing Brass angle stop cock 15 mm nominal bore,weighing not less than 85 gms with complete job as per specification and direction of E/I. Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.DSR Item No. - 8.63 |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar tapsDSR Item No. - 17.7.1 |
| 17 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.DSR Item No. - 18.18.3 |
| 18 | Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge.DSR Item No. - 21.18 |
| 19 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.10 |
| 20 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. -do- -do- all complete job as per direction of E/I.12.5 mm thick tapered edge gypsum moisture resistant boardD.S.R. Item No. - 12.45.4 |
| 21 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws, hinges,handles etc. complete as per direction of Engineer-in-charge.DSR Item No. - 9.169 |
| 22 | Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality : 1.0 mm thick.DSR Item No. - 9.127.2 |
| 23 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.DSR Item No. - 26.43.1 |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid.D.S.R. Item No. - 17.3.1 |
| 25 | Point Wiring in PVC Conduit, with Modular type Switch: - Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed with PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. Makeof Switch Sockets :- Havells (CRABTTERY), Legrand / Mk- /Scheinder, Anchor Roma).Group- CE.D. S.O.R. Item No. - 1.3.3 |
| 26 | Power plug wiring in PVC conduit (2x4 sq.mm.):- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.E.D. S.O.R. Item No. - 1.5 |
| 27 | Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. 1.7.1 - 2x1.5 Sqmm + 1x1.5 sqmm earth wire (for Single Separate 6A) (Circuit shall be taken from nearest switch board )E.D. S.O.R. Item No. - 1.7 |
| 28 | 1.7.2 - 2x2.5 Sqmm + 1x2.5 sq mm earth wire (for switch board circuit, 3 Nos. 6A sockets with 1 no.16ASwitch near each LAN out lets and circuit wiring for AC indoor units |
| 29 | 1.7.3 - 2x4.0 Sq.mm + 1x4.0 Sq.mm earth wire. |
| 30 | S/F Modular type Switch / Socket:- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder/Anchor- Roma).1.24.1 - 5/6 amps, one way modular switch E.D. S.O.R. Item No. - 1.24 |
| 31 | 1.24.3 - 15/16 amps, one way modular switch |
| 32 | 1.24.4 - 5/6 amps, 3 pin modular socket |
| 33 | 15/16 amps, 6 pin socket Outlet |
| 34 | S/F Modular boxes, base and cover plate:- Supplying and fixing following size /modules G.I. box along with modular base and cover plate for modular switches in recess etc. as required.1.27.1 - 1 or 2 modules (78mmx78mmx45mm) E.D. S.O.R. Item No. - 1.27 |
| 35 | 1.27.2 - 4/5 modules (78mmx140mmx50mm) |
| 36 | 1.27.3 - 6 modules (78mmx205mmx50mm) |
| 37 | 1.27.4 - 8 modules (78mmx230mmx60mm) (3 nos. 6A Sockets & 1 no. 16A Switch) |
| 38 | S/F light plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder- Anchor- Roma).E.D. S.O.R. Item No. - 1.31 |
| 39 | S/F power plug point with modular type accessories:-Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. Make:- Havells (CRABTTERY), Legrand /Mk/ Scheinder- Anchor- Roma).E.D. S.O.R. Item No. - 1.32 |
| 40 | S/F SP MCB DB:-Supplying and fixing following way, SP&N MCB distribution board of sheet steel for 240 Volts on surface /recess complete with tinned copper bus bar, neutral busbar, earth bar, detachable gland plate, interconnections, phophatized and powder coated painted including earthing etc. as required ( But without MCB/RCCB/ISOLATOR). Make:-Legrand/L&T/Schneider/ Siemens.2.8.8 - 8 Way Double DoorE.D. S.O.R. Item No. - 2.8 |
| 41 | 2.8.9 - 12 Way Double Door |
| 42 | S/F TP MCB DB: -Supplying and fixing following way,three pole and neutral sheet MCB distribution board, 415 volts on surface/recess complete with tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc. as required ( But without MCB/RCCB/ ISOLATOR).Make:- Legrand/L&T/Schneider/ Siemens.2.9.4 - 4 ways (4+12) Double Door. (horizontal type)E.D. S.O.R. Item No. - 2.9 |
| 43 | S/F 'C' Series MCB:-Supplying and fixing 240/415 V, 10 kA, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.Make:- Legrand/L&T/Schneider/Siemens.2.12.9 - 40A TPN E.D. S.O.R. Item No. - 2.12 |
| 44 | 20A 240V SPN MCB Industrial Socket Outlet:- Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required.Make:- Legrand/L&T/Schneider/Siemens.E.D. S.O.R. Item No. - 2.18 |
| 45 | Supply, installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS:- 374:2019 including wiring tne down rods, of standard length (up to 30 cm) with 1,5 FR PVC insulated, copper wire suitable for 230 Volts, 50 Hz, single phase supply etc. complete as required.( BLDC 5 Star (32 Watt) IS:374:2019 (energy efficient fans and two yeas warranty ) (Make & Model nos. of Fans are to be approved by Engineering Incharge & Consultant before procurement.)Supply of 48\\" (1200 mm) Sweep Ceiling fan BLDC 5 Star (32 Watt) IS:374:2019 (energy efficient fan.Make :Usha/Crompton/ Havells.E.D. S.O.R. Item No. - 9.4.3E.D. S.O.R. Item No. - 9.4 |
| 46 | SITC of 230 mm (9\\") Exhaust fan (Metal body) suitable for single phase 230 volts, 50 Hz., AC supply complete with motor, louvers/shutters etc. complete as required. Make :- Usha/Crompton / Havells .E.D. S.O.R. Page No. - 46 Code No. - M-774 |
| 47 | SITC of 400 mm (16\\") sweep AC 230/250 volts, 50 HZ Wall Mounting Revolving Fan with brackets, cooper winding, etc. complete all electric room etc.Make :- Usha/Crompton / Havells.E.D. S.O.R. Page No. - 46 Code No. - M-777 |
| 48 | SITC of following rating recess/surface mounted LED round/square shape Down Light Luminarie with pressure die-cast housing for single phase supply voltage. Luminarie shall be confirm to IS; 10322 part-5/section-2 or IEC 62722 with all necessary accesoreies as required. (100l/w , 5700K Cool white, rated voltage- 220/240V.Make:- Havells/Philips/Wipro.9.3.5 - 6/7 W Square Down light (Surface)E.D. S.O.R. Item No. - 9.3 |
| 49 | 9.3.6 - 12 W Square Down light (Surface) |
| 50 | 9.3.7 - 15/16 W Square Down light (Surface) |
| 51 | 9.3.8 - 18/20 W Round /Square Down light |
| 52 | 9.3.11 - 2'x2' LED Panel Light (36W)Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling |
| 53 | Add. 18% GST |
| 54 | Add. 1% Labour Cess Please Enable Macros to View BoQ information |
