|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : |
| 3 | Ordinary rock |
| 4 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. |
| 5 | M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 6 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: |
| 7 | Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 8 | Random rubble dry stone Kharanja under floor. |
| 9 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 10 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 11 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix |
| 12 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.M20 grade Nominal Mix / Design Mix |
| 13 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 14 | Hot rolled deformed bars (IS : 1139). |
| 15 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks |
| 16 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 17 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : |
| 18 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 19 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 |
| 20 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 21 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : |
| 22 | 20mm thick . |
| 23 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 24 | South (Red) |
| 25 | Above 3601 Cm2 Slabs |
| 26 | Jalore (P-white / S-white/ Rosy Pink colour) |
| 27 | Above 3601 Cm2 Slabs |
| 28 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 29 | Granite/Kota Stone Work |
| 30 | Half Edge moulding |
| 31 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 32 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 33 | Supply & fixing of M-20 grade precast cement concrete Kerb or Dand upto 60 cm length over 20 mm thick base of cement mortar 1:6 including jointing earth work, pointing & jointing with cement mortar 1:4 of size 20 x 25 cm |
| 34 | Providing & Fixing of anti skid high strength, high finish, coloured Tile/Interlocking flooring having thickness 60 mm over prepared surface with base of 25 mm thick cement and mortar 1:4 as per approved colour, design & drawing including all erspect complete. (the design of paving blocks shall be decided by Engineer-in-charge) |
| 35 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905. 300 mm dia |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work |
| 37 | P & F gun metal statue/sculpture of any type & size as per approved drawing and placement of statue/sculpture as per direction of engineer-in-charge (composition of Gun Metal, Copper 85%, Tin 5% Lead 5% Zinc 5%.) |
| 38 | Supplying and fixing at site, single piece solid stone element/statue/sculpture made out by carving work in first class (Superior class) P-WHITE marble/ Pearl White Sand Stone / Gwalior White Sand Stone or similar category/ Range (As approved by EIC) free from cracks, flaws & stains etc. with additional/required carving work on stone element for Cladding/Arches/Pillar/Jali/Chataries/Dassa/Chajja/Dome/Flooring including Planning, developing, making base, carving work (Up-to 25 mm deep carving work), polishing, all loading-unloading, transportation, scaffolding, hoisting, installation with all required T&P (including white cement, pigment, Chemical, SS clamps and fasteners of approved brand etc.), fixing over/on base/surface as per shape -size & placement of approved drawing , finishing, surface treatment etc. covering properly till the date of opening/inauguration of site etc. The stone should be pre/post -treated with suitable chemical polish for maintaining original colour and Ceramic surface treatment to be done to avoid surface staining & effect of external weather condition, pollution & dust etc. Proto type model of element/statue/sculpture (fiber glass or plaster of Paris) may also be required of same shape, size and detailing, for which nothing be paid extra. Preferably, the single piece stone block shall be used for the particular element/statue/sculpture but if not possible, material from the same block/lot of stone, shall only be used for similarity & fine n hair line pasting/jointing shall be done with suitable material in such a way so that joint(s) be not visible from front site. Complete job in all respect including in-lay work if required, as per approved design & drawing under approval of project consultant, appointed for the project & as per directions of Engineer-In-Charge. |
| 39 | (Theme, concept plan, schematic arrangement, other relevant details and drawings of element/statue/sculpture are enclosed .The final drawing shall be provided after award of the work.) |
| 40 | Note: Payment shall be made in Sqm, largest O/O dimension of a finished product (element/statue/sculpture). Other masonry, concreting, steel reinforcement plastering etc. required shall be paid extra but metallic items such as copper/bronze/gunmetal pipes, nozzles etc of approved make etc., conduiting for water pipe line, electric line etc. or hole of desired shape n size, required for fixing/installation or structurally etc. in any element shall be inclusive in the rate. 50 mm to 75 mm |
| 41 | laosnd }kjk foHkkx }kjk crk;s x;s LFkkuksa ij ikS/ks yxkus ls iwoZ fu/kkZfjr eki ds [kìs djuk ,oa laosnd }kjk ikS/kk yxkus ls iwoZ çR;sd [kìs dks mi;qDr feêh ls Hkjuk gksxkA |
| 42 | ¼l½ lk/kkj.k feV~Vh(size 0.60×0.60×0.60 mtr.) |
| 43 | laosnd }kjk fuEu çtkfr;ksa ds 'kcZl dh vkiwfrZ ,oa yxkukA ikS/kk LoLFk gksuk pkfg,A ikS/kksa dh Å¡pkbZ 0-40 ls 0-50 eh- rd A |
| 44 | Lalri /Anermi /Golden Duranta |
| 45 | Supply and plantation of selected specmen & Ornamental trees including/ unloading & transportation etc. complete |
| 46 | Cycus circinalis 4'-5' dia |
| 47 | Ficus panda 4'-5' topiary dia 3'-4' |
| 48 | Ficus starlight 4'-5' |
| 49 | Supply and plantation of selected shrubs including mortality replacement, loading-unloading transportation and maintenance for 30 days after planting |
| 50 | Ticoma gaudichaudi 3'-4' |
| 51 | Nerium oleandar 3'4' |
| 52 | nwc dk la/kkj.k dk;Z &yxh gqbZ nwc dk la/kkj.k dk;Z esa [kjirokj fudkyuk] fu;fer flapkbZ djuk] [kkn Mkyuk ,oa e’khu ds }kjk fu;fer dVkbZ djuk rkfd nwc vPNh rjg ls fodflr gks ldsA |
| 53 | for 12 months |
| 54 | Maintenance of Hedge, Climbers, Shrubs at parks including watering, trimming, preparation of thawala, manure and complete work. |
| 55 | for 12 months |
| 56 | Laying of lawns including ploughing leveling breaking of clods manuring and removal of stones etc. (cost of manure or extra good earth to be paid separately )maintenance of lawn foe 30 days or more till the grass forms a thick lawns free from weeds and fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost |
| 57 | in rows 5 cm apart in either direction |
| 58 | Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. |
| 59 | Good soil of earth |
| 60 | Supply of dry manure including loading unloading,transportation & stacking at site. |
| 61 | Farm yard manure(organic) |
| 62 | Spreading of manure , good earth in required thickness (cost of manure and good earth to be separately ) |
| 63 | Construction of tube-well from ground levels and upto 100 Meter depth and above to accommodate housing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coir-rope, wherever necessary, for arresting fine sand particles. The work will not include cost of housing pipe and strainer pipe assembly and development work, but work would be completed after obtaining sand free water). |
| 64 | 200mm –do-. |
| 65 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. |
| 66 | 200 mm Nominal bore of pipe |
| 67 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:200 mm dia |
| 68 | Supply of different H.P. Motor pumps submersible pumps / Multistaged pumps at store including transportation etc. complete : |
| 69 | Submersible Pumps 5 H.P. ISI Marked KSB |
| 70 | Supply and fixing of oil / Air break DOL / Star Delta Starter made out of sheet steel powder coated enclosure with single phasing protection, ON / OFF push buttons, etc. complete in all respect suitable for following rating motors. |
| 71 | Fully Automatic Star/ Delta Starter |
| 72 | 3.0 HP to 10.0 HP |
| 73 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.4.0 Sq.mm 3 core flat / Round |
| 74 | Providing & Fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings |
| 75 | for vertical installation |
| 76 | 63 mm OD 6 kg / cm2 |
| 77 | Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following sizes. |
| 78 | 12mm (suitable up to 50 mm OD pipe) |
| 79 | Providing and fixing 3-layer PP-R (Polypropylene random coplymer ) pipes SDR 7.4 UV stabilized and antimicrobial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings and fixing the pipe with clamps at 1 metre spacing. This includes cost of cutting chases and making good the same including testing of joint complete as per direction of Engineer - in charge.(CONCEALED WORK INCLUDING CUTTING CHASES AND MAKING GOOD THE WALL ETC.) |
| 80 | PN-16 Pipe, 32 mm OD |
| 81 | P & F Gun-metal Non-return Valve or Check Valve (IS : 778 Make) of approved make, superior quality: |
| 82 | 40mm nominal bore. |
| 83 | Horizontal |
| 84 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : |
| 85 | Gun-metal 32 mm nominal bore. |
| 86 | P & F of IP 65 / IP66 protected High Power LED Flood Light system with extruded aluminium housing, toughened glass diffuser with suitable lenses on LED to acheive various beam angles, 240V, 50Hz - High Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards.System life of 25,000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE and compliance |
| 87 | High Power LED Flood Light 160W |
| 88 | Supply and erection of M S swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be fabricated by using ISI mark tube for structural purpose of following height & designation. ( See Table E - 09 for specs. ) |
| 89 | 7.5 Mtr. ( 410 SP - 5 ) |
| 90 | P & F of IP67 IK10 protected Buried uplight LED fixture with aluminium housing, LED 15W - 25W, 220V-240V, 50Hz LEDs with available in quick connecting cable coupled with various mounting accessories. Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (Integral with light fixture). system life of 25000 Burning Hours with 70% of initial Lumens maintained. Light output in Green, Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE compliance. |
| 91 | LED Uplight Round/square 25W |
| 92 | P & F of IP 65 protected LED Post-Top-Light system with Die cast housing, poycarbonate diffuser, 40 - 60W, 220-240V, 50Hz (integrated Driver), LED lamps supplied with pre-wired cable of 1 mtr. Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standards (Integral with light fixture).system life of 25000 Burning Hours with 70% of initial Lumens maintained. Light output in Cool white or Warm White Colour as per engineers choice. Fixtures shall be CE compliance. |
| 93 | 40W LED Post Top Fixture |
| 94 | Providing and fixing of IP 65 protectd Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, complete with The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. |
| 95 | 225 mm X 225 mm X 100 mm |
| 96 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. |
| 97 | 6 A to 32 A rating |
| 98 | SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) |
| 99 | P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. |
| 100 | 9.0 mm thick |
| 101 | Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. |
| 102 | Electrolytic grade Aluminium bus bar |
| 103 | SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required. |
| 104 | With Thermal Magnetic release |
| 105 | 160 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 106 | SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, including making connections with lugs & spreaders, etc. as required. |
| 107 | With Thermal Magnetic release |
| 108 | up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 109 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 110 | 35.0 Sq.mm |
| 111 | 3.5 core |
| 112 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size |
| 113 | 10.0 Sq.mm |
| 114 | 4 core |
| 115 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
| 116 | 2 x 2.5 sq. mm. + 1x1.5sqmm |
| 117 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 118 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 119 | 8 SWG G.I. ( Hot Dipped ) Wire |
| 120 | P&F of IP51 direct or CT operated, 1x240 / 3x240 volts , 50 Hz static watt-hour meter (kwh) having resolution 0.1 / 0.01 kwh , 1/ 0.5 accuracy class , LED indicators for tamper operation ( Reverse &/or earth connection) , pulsating LED indicator for meterology , electromechanical counter , LCD Display, cover plate for body and terminal sealing , including making connection ,testing etc. as required. |
| 121 | up to 40 ampere single phase meter |
| 122 | P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required. |
| 123 | 3 pole Power contactors with following AC 3 Rating |
| 124 | 95 Amp |
| 125 | Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , Painting etc. as required. |
| 126 | Supply & fixing of GI pipes with flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect ISI make.B class 65mm dia |
| 127 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. |
| 128 | 20 mm |
| 129 | Operation and Maintenance of circle including security, cleaning and maintenance of all electrical equipments like ,lights ,motor,MCB,MCCB cable etc round the clock as per direction of engineer in charge.Replacement of light , cable other electrical equipment shall be done by contractor at his own cost.payment shall not be made by UIT. Please Enable Macros to View BoQ information |
