|
| 1 | Taking down cement plaster of any thickness from wall's/ceiling including raking out joints hacking for key scrubbing down with water and dispose off debries out side the premises where directed complete. |
| 2 | Material and labour 12 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finsihed the surfaces even and fair without using extra cement. |
| 3 | Material and labour 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finishing the surface fair and even with water proofing compound complete all as specified and directed.(Note water proofing compound will be measured and paid separately) |
| 4 | Material and labour 5mm thick rendering on concrete surfaces in cement mortar 1:3 , as in ceiling, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 5 | Material and labour for Preparing of new plastered surface and applying two coats cement base paints on walls complete as specified |
| 6 | Material & Labour for preparation of newly plastered wall surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and exterior paint of required shade @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete. |
| 7 | Material and Labour for preparation of newly plastered surfaces over 2mm wall care putty to make surface smooth and applying two coats of oil bound distemper on walls all as specified. |
| 8 | Material & Labour for preparation of newly plastered wall surface and applying two cotas of Acrylic Smooth exterior paint of required shade,applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm complete. |
| 9 | Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified. |
| 10 | Material and labour preparing old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc applying one coat of oil bound distemper over 3mm wall care putty to make surface smooth complete. |
| 11 | Material and labour for complete removal of existing treatment on old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc and applying Two coat of Oil Bound Distemper complete all as specified and directed. |
| 12 | Material & Labour for preparation old plastered wall surface and applying one cotas of Acrylic Smooth exterior paint of required shade,applied @ 1.67 ltr/10 sqm over complete. |
| 13 | Material and Labour for preparation of old surfaces and applying two coats of white wash on ceiling complete all as specified. |
| 14 | Material and labour for Preparing of old plastered surface and applying one coats cement base paints on walls complete as specified |
| 15 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
| 16 | All as per Srl item herein above, but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr |
| 17 | Taking down shutter of any description size but exc 1 sqm and n.exc 2 sqm complete all as specified and directed. |
| 18 | Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 |
| 19 | Supply and fixing IInd class hard wood Glazed and skeleton shutters 30 mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters and fitted to chowkats complete all as specified and directed |
| 20 | Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed |
| 21 | S& F for Factory made single extructed WPC but frame size 60 x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction. |
| 22 | Supply and fixing for Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 35 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) |
| 23 | Supply and fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels. |
| 24 | Supply and fixing in repair door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed |
| 25 | Supply and fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej |
| 26 | Supply and fixing Anodised aluminium frame for doors powder coated (minimum thickness of powder coating shall not be less than 50 micron),windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips complete all as specified and directed |
| 27 | Supply and fixing Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifiedNote : Each panel shall be measured separetely. Glass pane shall be measured and paid separetely. |
| 28 | Supply and fixing Providing and fixing powder coated(Min thickness of powder coating shall be 50 micron) aluminum windows shutter of size min 18mmx50mm for sliding type windows of standard tubular sections of approved make having glazed panels or glazed and gauzed panels of appropriate size running on seperate tracks in the channel conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth,rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. All the panels shall be of appropriate size having overlaps as required and including all required beadings, clips, rollers, rubber gaskets, cleats,complete and powder coating in approved shade and colour. Note:- Each panel shall be measured separetely. Glass pane and wire mesh shall be measured and paid separetely. |
| 29 | Supply and fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading ,as per instructions of manufacturer scomplete all as specified and directed |
| 30 | Supply and fixing toughned glass,10 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. all as specified and directed |
| 31 | Supply and fixing figured glass, 5 mm thick ordinary quality, in squares Not ,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed |
| 32 | Supply and fixing Brass mortice lock,4 levers, verticle type, size 100 mm, complete all as specified and directed. |
| 33 | Material and labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces. |
| 34 | Material and labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces. |
| 35 | Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete incuding taking down all as specified and directed |
| 36 | Hacking out old broken glass any thickness, size, quality or description from steel frames with oil glazing pin, glazed with putty or fixed with beads Complete all as specified |
| 37 | Supply and fixing 3mm thick ordinary quality sheet glass, not exceeding 0.50 sqm in each pane including and glazing with oil putty. |
| 38 | Supply and fixing 250 mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 39 | Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed. |
| 40 | Supply and fixing 150mm long Aluminium handles, cast type anodised. |
| 41 | Supply and fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 42 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 43 | Supply and fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed. |
| 44 | Material and labour for Vitrified ceramic light shade tiles 8mm to 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar(1:6) 15mm thick for laying floor finishes complete all as specified and directed. |
| 45 | Supply and fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed. |
| 46 | Supply and fixing in repair vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basin etc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified. |
| 47 | Supply and fixing in repair health faucet complete all as specified and directed |
| 48 | S& F repair vitreous china wash down water closet pedestral pattern pan (coupled closet ) white /coloured including vitreous china flushing cystern flush pipe seat, cover cystern cover complete |
| 49 | Supply and fixing in repair replacement vitreous china wash down water closet pan (pedestal pattern) white with trap including connection to existing out joint pipe, flushing pipe or cistern, antisyphonage pipe, including plastic water closet seat white closed pattern with flat botom and cover mild steel chromium plated or aluminium plated or aluminished hinging device complete all as specified and directed. |
| 50 | Supply and fixing 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed. |
| 51 | Supply and fixing in repair CP Jet spray suitable for EWC complete as specified |
| 52 | Supply and fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail. |
| 53 | Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm. |
| 54 | Supply and fixing in repairs pillar taps cast copper alloy 15mm bore with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 55 | Supply and fixing Brass chromium plated Pillar mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes. |
| 56 | Supply and fixing Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes. |
| 57 | Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 58 | Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. |
| 59 | All as per Srl Item no 58 above but of capacity 500Ltr capacity |
| 60 | Taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm complete all as specified. |
| 61 | All as per above item here-in-before but 20 mm bore. |
| 62 | Supply and fixing15mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete all as specified. |
| 63 | Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed. |
| 64 | Supply and fixing 20mm bore tubes medium grade , galvanised, with all fittings, and fixed complete to walls and ceilings or laid in floors complete |
| 65 | Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed. |
| 66 | Supply and fixing in repair 15mm bore Concealed fancy type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. |
| 67 | Supply and fixing in repair 15mm bore fancy type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. |
| 68 | Supply and fixing in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed |
| 69 | Supply and fixing in repairs 100mm dia CP grating with or without hole type complete all specified |
| 70 | Supply and fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified |
| 71 | Supply and fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified |
| 72 | Supply and fixing in reapir soap dish fixed to walls with chromium plated brass screws complete all as specified. |
| 73 | Dismantling of PVC pipe of 75/100mm dia fixed with cement joint complete all as spec ified. |
| 74 | Material and labour 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 75 | Supply and fixing PVC (SWR) 110mm dia mtr pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete. |
| 76 | Supply and fixing PVC (SWR) 110mm dia mtr bends any radius complete. |
| 77 | Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 78 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar. |
| 79 | Material and labour Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4. |
| 80 | Dismantling boarding , any description , fixed in any position with screws all as specified. |
| 81 | Material and labour for Providing and fixing Gypsum board 12 mm thick Seamless calcum silicate in ceiling made out of 1800x1200 size board of siliceous and calcareous material reinforced with fixed with screw , GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre andas per manufacturers instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening . |
| 82 | Supply and fixing in reapair 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. |
| 83 | Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) /fibre sheet and in roof coverings. |
| 84 | Dismantling of RCC Post any sectiont embadded in concrete, brick masonary all as specified. |
| 85 | Material and labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface. |
| 86 | Material and labour Cement concrete type C-2, 1:3:6 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 87 | Supply and fixing post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in incl all necessary drilling bolting and rivetting conforming to Fe-290 Gd-165. |
| 88 | Supply and fixing Fibre glass reinforced translucent sheeting plain 2 mm to 3 mm thick of an colour having tensile strength of as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 89 | Dismantling of brick tiles single layers on roof, jointed and grouted / pointed in cement mortar including cleaning serviceable tiles and stacking properly for re-use, disposal of unserviceable tiles and debris /rubbish from site complete all as specified. |
| 90 | Demoliton of mud in roof any thickness including mud plastering and removing debries of the premises where directed complete. |
| 91 | Material and labour PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, sloping padding and finishing the surface even and smooth (without using extra cement) complete all as specified. |
| 92 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm includingcleaning surfaces etc complete all as specified |
| 93 | Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to eiher side complete all specified. |
| 94 | Material and labour for 40 mm thick brick tiles laid over and including 15mm thick bedding layer in cement mortar 1:6 and jointed, grouted and flush pointing as work proceed in CM 1:3 complete all as specified. |
| 95 | All as per Srl item above here-in-before but except tiles.Note : (i) Serviceable brick tiles obtained from shall be reused. |
| 96 | Demolation of brick work built in cement mortar or cement lime mortar as cutting, opening of exsiting wall complete all as specified and direced. |
| 97 | Material and labour brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed. |
| 98 | All as per item above here-in-before but except bricks (old bricks shall be reused after necessary cleaning of mortar). |
| 99 | Material and labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed |
| 101 | Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directed. Note : 1. Switche/socket/regulator/etc shall be measured and paid separatelya) For one light /fan/ buzzer point controlled by one 5 Amp switch one way |
| 102 | b). For one three pin socket outlet 5 Amps independent board complete |
| 103 | c) For one three pin 5 Amps socket outlet on the same board with other switches |
| 104 | d) For one light point controlled by two way switch |
| 105 | All a per item No 101 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete. |
| 106 | Supply and fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed. |
| 107 | Supply and fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed. |
| 108 | Supply and fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed. |
| 109 | Supply and fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge |
| 110 | Supply and fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed. |
| 111 | Supply and fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed. |
| 112 | Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified. |
| 113 | S&F Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed. |
| 114 | Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed . |
| 115 | Supply and fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted. |
| 116 | Supply and fixing in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. |
| 117 | Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 118 | Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 119 | Supply and fixing in replacement MCB single pole 6 to 32 Amps all as specified and directed. |
| 120 | Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed |
| 121 | Supply and fixing in replacement 40 to 63 Amps MCB TPN, 415 Volt all as specified and directed. |
| 122 | S&F in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). Please Enable Macros to View BoQ information |
| 123 | S&F in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). Please Enable Macros to View BoQ information |
