Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Schedule 'A' Part-I (B/R itmes)Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed. |
| 2 | Providing and injecting emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 concentrate along the external wall of building below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement 2 Coarse sand) in apron etc,. ,complete all as specified and directed. |
| 3 | Providing and injecting chemical emulsion for post construction anti termite treatment using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 of soil under existing floors using chemical emulsion @ 1 Litre per hole 300mm apart including drilling 12mm dia holes @ 300 mm apart and plugging holes with cement mortar 1:2 (1 Cement & 2 Coarse sand) to match the existing floor and making good the disturbed sufaces to match with the existing surface, ,complete all as specified and directed. |
| 4 | Providing and injecting chemical emulsion for post constructional anti termite treatment at points of contact of wood work by using chemical chloropyriphos 20 EC conforming to IS 8944 or lmidacloprid 30.50 SC conforming to IS 16131 emulsion in oil or kerosene based solution @ 0.5 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree @ 150mm centre to centre and sealing the same and making good the disturbed sufaces to match with the existing surface, ,complete all as specified and directed. |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position including any type of sunken treatment , roof treatment, PCC padding, roof PCC tiles, lime concrete etc. , ,complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt,contractor should quote his rate Keeping this aspect in mind. |
| 6 | Material & Labour ,15 mm thick plaster in cement mortar (1:4) over concrete surfaces of roofs finished even and smooth with WPC @ 3% by weight of cement ( WPC will be measured paid for seperately) as in roof treatment work all as specified and directed . |
| 7 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufacture's instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only , complete, all as specified and as directed.(iv) The work shall be carriout at a height upto 12 metre. |
| 8 | Material and Labour cement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints grouted and pointed flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 , complete, all as specified and as directed. |
| 9 | Material & Labour PCC (1:3:6) type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding incl cement slurry @ 3Kg/Per sqm over old RCC surface, surface finished even & smooth without using extra cement. all as specified and directed. |
| 10 | Material and Labour for providing cement concrete 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, padding, rounded or chamfered on edges including from work where ever required , complete, all as specified and as directed. |
| 11 | Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles , ,complete all as specified and directed. |
| 12 | Material & Labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 , ,complete all as specified and directed. |
| 13 | Material & Labour brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius , ,complete all as specified and directed. |
| 14 | Material and labour for PCC 1:5:10, using 40 mm graded brick aggregate as in filling in sunken floor, rounded or chamfered on edges complete all as specified as directed by the Engineer-in-Charge. |
| 15 | Material and Labour for 15mm thick cement plastering in cement mortar 1:4 mixed with water proofing compound as in sunken floor etc complete all as specified and directed. |
| 16 | Cutting grooves in brick wall, for inserting APP membrane and other works. 75mm wide and 65mm deep and shaping horizontal face of grooves and making good with cement mortar 1:3, all as specified and directed. |
| 17 | Supply only integral water proofing compound, ,complete all as specified and directed. |
| 18 | Material & Labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid by torch forced application over and including a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm over and including complete used in sunken portion all as specified . |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises , complete, all as specified and as directed. |
| 20 | Material & Labour providing 75 mm thick cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregates as in plinth protection, laid in alternate bays (not exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work, complete, all as specified and as directed. |
| 21 | Material & Labour for 25 mm thick Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in sub base floors, surface fair finished and even and rough to receive floor finishes , complete, all as specified and directed. |
| 22 | Material & Labour Non Skid coloured ceramic tiles joint free premium/1st quality 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 23 | Material & Labour Non Skid coloured ceramic tiles premium/1st quality of same description as of floor tiles in serial item No 22 above as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 complete all as specified and as directed. |
| 24 | Material & Labour for glazed ceramic coloured tiles 400x300x7 to 8mm thick on vertical surfaces such as dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar (1 :4) complete all as specified and as directed. |
| 25 | Dismantling stone slab of any description or thickness laid, bedded and pointed in any motar in floors etc, complete all as specified and directed by Engr-in-Charge. |
| 26 | Material and labour for Granite (of any type) slab 18-20 mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 27 | Material and labour for Granite (of any type) slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirting with admixiture of pigment to match the shade of granite stone indluding grinding and polishing complete over and including 10 mm thick backing coat in Cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 28 | Material and labour for rounding to edges of stone slab both edge such as in steps, cooking plateform and other similar situtaions with grinder, complete all as specified and directed by Engr-in-Charge. |
| 29 | Material and labour for machine cut kota stone slab flooring 18 to 22 mm thick of ( each not less than 550mm x 550mm) in floor/landing/treads of stairs, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in Cement Mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 30 | Material and labour for machine cut kota stone slab flooring 18 to 22 mm thick in skirting/risers , set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick rendering in Cement mortar 1:4 , complete all as specified and directed by Engr-in-Charge |
| 31 | Material and labour for machine cut green marble stone slab flooring 18 to 22 mm thick in floor, window cills, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in Cement Mortar 1:6, complete all as specified and directed by Engr-in-Charge. |
| 32 | Material and labour for machine cut green marble stone slab 18 to 22 mm thick in skirting/risers , set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick rendering in Cement Mortar 1:4, complete all as specified and directed by Engr-in-Charge. |
| 33 | Dismantling of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engr-in-Charge. (Reinforcement cut to facilitate dismantling) |
| 34 | Material and labour for Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate, as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likedack slab, complete all as specified and directed by Engr-in-Charge. |
| 35 | Material and labour for reinforced cement concrete design mix M-25 using 20mm graded stone aggregate, graded stone aggregate as in chajjas, Fins, fascias, louvres, parapets, and railings exceeding 60cm in height, newels, balustrade, and the like, complete all as specified and directed by engineer in charge . |
| 36 | Material and labour for formwork to chajjas, fins, louvres, facias including edges for rough finished surfaces of concrete flats, complete all as specified and directed by Engr-in-Charge. |
| 37 | Material and labour for formwork to soffits of suspended slabs such roof slab, floor slabs, landings and similar work not exceeding 20 centimetre thick (horizontal or sloping) flat for rough finished surfaces of concrete, complete all as specified and directed by Engr-in-Charge. |
| 38 | Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 05cm but not exc 10cm wide, for roughed finished surface of concrete, complete all as specified and directed by Engr-in-Charge. |
| 39 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , ,complete all as specified and directed. |
| 40 | Taking down chowkats or frames with shutter area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , ,complete all as specified and directed. |
| 41 | Taking down shutters of any description area exceeding 1 sqm and not exceeding 2 sqm each and removing the same from site, complete all as specified and directed by Engr-in-charge. |
| 42 | Supply and fixing mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 ,complete all as specified and as directed. |
| 43 | Supply and fixing Mild steel 1.00 mm thick , plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified . |
| 44 | Cutting holes in brick walls built in cement mortar exceeeding half brick thick and not exceeding one brick thick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall)as required ,complete all as specified and as directed. |
| 45 | Material and labour for rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixing conforming to Fe-290-W (Gde E-165) quality 'A' complete all as specified and as directed. |
| 46 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58–60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant , ,complete all as specified and directed. |
| 47 | Supply and fixing of factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/chowkhat of size 65mm x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with mild steel hold fast of required dia and length complete all as specified and directed.NOTE : - (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made.(ii) Material manufacture test certificate should be provided before execution of work |
| 49 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 50 | Supply and fixing of factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter ( Jointless )of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing all as per specification & drawing complete all as specified and directed |
| 51 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and as directed by the Engr–in–charge. |
| 52 | S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutter fabricated from following sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mm made from 1.25 mm thick MS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf (vi) Pintal hinges 12 x 75 mm - 2 Nos each leaf (vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 53 | Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-charge. |
| 54 | Material & Labour sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, ,complete all as specified and directed. |
| 55 | Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, complete all as specified and as directed. |
| 56 | M&L 18/19 mm Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for kitchen cupboards or cupboard shutters complete all as specified and as directed by the Engineer-in-charge |
| 57 | Material and Labour Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails of 2nd class hardwood of sectional area exc 13 sqcm but not exceeding 25 sqcm ,complete all as specified and as directed. |
| 58 | Supply and fixing Continuous (piano) hinges, width of flaps 30mm mild steel, bright finish or electro galvanised ,complete all as specified and as directed. |
| 59 | Supply and fixing 75 mm long brass handle cast type polished bright ,complete all as specified and as directed. |
| 60 | Supply and fixing brass body ball catches with 8mm dia steel ball and striking plate including letting in,complete all as specified and as directed. |
| 61 | Resecuring or easing & adjusting after taking down shutters of any description area exc 1 sqm and not exc 2 sqm each and refixing in the same opening ,complete all as specified and as directed. |
| 62 | Supply and fixing stainless steel wire cloths 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple ,complete all as specified and as directed. |
| 63 | Supply and fixing 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pine including screwing or welding to MS / PVC frame ( as required ) all as specified and directed |
| 64 | Supply and fixing 150 mm long aluminium handle cast type anodised ,complete all as specified and as directed. |
| 65 | Material and Labour 2nd class hard wood Small fitting such a brackets of any type ,latch and hinge block , shaped door and window stops and the like including all necessary labours articles n. exc200 Cu cm each including 50mm long mild steel cold rolled medium weight but hinge ,complete all as specified and as directed. |
| 66 | Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 67 | Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed ,complete all as specified and as directed. |
| 68 | Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed ,complete all as specified and as directed. |
| 69 | Supply and fixing 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter ,complete all as specified and as directed. |
| 70 | Material and Labour galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair, complete all as specified and as directed. |
| 71 | Material and Labour galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair,complete all as specified and as directed. |
| 72 | Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth ,complete all as specified and as directed. |
| 73 | Supply and fixing 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,as in repair ,complete all as specified and as directed. |
| 74 | Supply and fixing in repair Vitreous china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap and including PVC low level flushing cistern 10 ltrs capacity and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia ,complete all as specified and as directed.Note : The cost of traps , flushing cistern and PVC flush pipes are included in this item. |
| 75 | Supply and fixing vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair ,complete all as specified and as directed. |
| 76 | Supply and fixing sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen with plugs, waste pipe, brass chromium plated coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm as in repair complete all as specified and as directed by the Engineer-in-Charge |
| 77 | Supply and fixing as in repair fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed. |
| 78 | Supply and fixing as in repair 15mm bore cast copper alloy chromium plated stop or angular stop valves with capstan head, screwed down, high pressure scrwed both ends for iron pipe or for unions ,complete all as specified and as directed. |
| 79 | Supply and fixing as in repair bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and as directed. |
| 80 | Supply and fixing as in repair brass chromium plated shower rose 125mm size swivel type with arm of standard size as per site ,complete all as specified and as directed. |
| 81 | Supply and fixing 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, scrwed both ends for iron pipe or for unions as in repair ,complete all as specified and as directed. |
| 82 | Supply and fixing PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair ,complete all as specified and as directed. |
| 83 | Supply and fixing as in repair CP ( brass body ) Towel Rail 450mm long fixed with and including Chromium plates brass screws and wooden /plastic cleats (minimum weight 170gms ) complete all as specified . |
| 84 | Material and Labour for Stainless steel plate rack of size 31\\" x 30\\" x 10\\" of load capacity not less than 30 kg including fixing with stainless stell screws including taking down of old plate rack of any description complete all as directed by Engr in Charge |
| 85 | Supply and fixing in repair Stainless steel ( SS 202 grade ) Curtain rod 25 mm dia 0.80 mm wall thickness, mild steel, chromium plated including ornamental type supporitng and end brackets as per sample ,complete all as specified and as directed. |
| 86 | Supply and fixing as in repair 100mm bore PVC (SWR) floor trap, plain with chromium plated grating including jointing with solvent cement, complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fixing in repair brass CP Soap Dish of size 100mmx100mm as approved Design, complete all as specified and directed by Engr in Charge . |
| 88 | Supply and fixing as in repair, water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing from site all as specified in SSR Part–I ,complete all as specified and as directed.Note : - The colour of tanks shall be white colour . |
| 89 | Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia,,complete all as specified and as directed. |
| 90 | Desilting of manhole complete by removing all scum, sludge, silt (both organic and inorganic nature) by manual labour or mechanical scraper and disposal of the same and buried in trenches etc, as in foul condition for any depth complete all as specified. Note:- Sludge, scum, silt (both organic and inorganic nature) water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land. |
| 91 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | Returning, filling in, including spreading, levlling ,watering and well ramming in layers not exceeding 25 mm thick each layer, complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | Removing surplus excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed by the Engineer-in-Charge. |
| 94 | Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) ,complete all as specified and as directed. |
| 95 | Supply and fixing 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall , complete, all as specified and as directed. |
| 96 | Supply and fixing 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall ,complete all as specified and as directed. |
| 97 | Supply and fixing 110mm bore PVC (SWR) bends of any radius with acces door, complete, all as specified and as directed. |
| 98 | Supply and fixing 75mm bore PVC (SWR) bends of any radius with access doors ,complete all as specified and as directed. |
| 99 | Supply and fixing 110mm bore PVC (SWR) juction double (double T) equal are unequal with acces door ,complete all as specified and as directed. |
| 100 | Supply and fixing 110mm bore PVC (SWR) juction single (Single T) equal are unequal with acces door ,complete all as specified and as directed. |
| 101 | Material and Labour as in repair for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, ,complete all as specified and as directed. |
| 102 | Supply and fixing as in repair 75 mm bore PVC (SWR), vent cowls including jointing with solvent cement, ,complete all as specified and as directed. |
| 103 | Supply and fixing 110 x 75 mm bore PVC (SWR), reducer including jointing with solvent cement,,complete all as specified and as directed. |
| 104 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete, all as specified and as directed. |
| 105 | Material and labour for rendering 15 mm thick (in patches) on brick work or concrete wall surfaces in cement mortar (1:4) including mixing water proofing compound @ 2% by weight of cement or as per manufacturer's instruction and finished even and smooth without using extra cement complete, all as specified and as directed by the Engineer-in-Charge. (Note- WPC shall be measured & paid separately) |
| 106 | Material and Labour rough cast plaster 15 mm thick in cement motar 1:4 complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete, all as specified and as directed. |
| 107 | Material and Labour preparation of newly plastered or un-plastered surfaces on walls ,chajjas , roof projection , cornices of brick /concrete surfaces etc. and applying two coats of cement based paint (white or tinted) over a coat of alkali resistant primer , complete all as specified and as directed |
| 108 | Material and Labour for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement,complete all as specified and as directed. |
| 109 | Material and Labour for prepartion of new plastered/ concrete surfaces and applying two coats of oil bound emulsion or acrylic distemper over and including one coat of primer and two coats of wall care putty to achive smooth surface complete all as specified and directed. |
| 110 | Material and Labour preparation of newly plastered/ unplastered surfaces of brick/ concrete wall and applying two coats of white lime wash ,complete all as specified and as directed. |
| 111 | Material and Labour rendering 05 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement ,complete all as specified and as directed. |
| 112 | Material and Labour preparation of new plastered/ unplastered surfaces of brick/concrete ceiling and applying three coats of white lime wash ,complete all as specified and as directed. |
| 113 | Complete removal of existing treatment on walls by with mechanical / electrical driven grinders suitable for removal work and scrapping washing rubbing down etc and applying two coats of oil bound emulsion or acrylic distemper over and including two coats of acrylic based wall care putty with one coat of primer all as specified and directed by Engr-in-charge |
| 114 | Material and Labour complete removal of existing treatment on ceiling (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white lime wash,complete all as specified and as directed. |
| 115 | Material and Labour preparation of old decorated surfaces on walls ,chajjas , roof projection , cornices of brick /concrete surfaces etc. and applying two coats of cement based paint (white or tinted) ,complete all as specified and as directed. |
| 116 | Material and Labour for preparation of old decorated surfaces of walls and applying two coats of white wash ,complete all as specified and as directed. |
| 117 | Preparation of old painted steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ,complete all as specified and as directed. |
| 118 | Material and Labour preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as specified and as directed. |
| 119 | Material and Labour preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint ,complete all as specified and as directed. |
| 120 | Schedule 'A' Part-II (E/M itmes)Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and as directed. |
| 121 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling surfaces and including provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade, ISI marked with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly (boxes shall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally) including provision of new covered plate over sunken box for housing the modular switches , modular socket outlets,modular fan regulators etc. for one light/fan/exhaust fan/bell point controlled by one way switch, complete all as specified and as directed. Note :- a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid for separately . |
| 122 | Description all as per serial item No.121 here-in-before but for One 3 pin, 6 Amps, socket outlet controlled by one switch on independent board, complete all as specified and as directed. |
| 123 | Description all as per serial item No.121 here-in-before but for One 3 pin 6 Amps socket outlet controlled by one switch on same board, complete all as specified and as directed. |
| 124 | Material & Labour for concealed point wiring complete with 2.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including medium grade, ISI marked, PVC conduit,medium grade ISI marked not less than 20 mm dia with accessories fixed concealed/surface type on wall/ roof/ ceiling and including provision of 2.50 sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor green colour as earth conitnuity conductor and connected to common earth dolly with suitable size lugs, including mild steels sunken box or pressed steel terminal box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-1) of 1969 and IS:14772:2000 with earth dolly and coated with two coat of anti corrosive paint over a coat of red oxide primer both internally and externally with and including (provision of new) modular covered plate over sunken box for housing the modular switches, socket outlets., fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for :-Note:-1 Modular metal flush / sunken box, and for modular switch/ socket cover plate & sheet are inclusive in the item rate quoted. |
| 125 | Supply and fixing of modular switch 1 module, single pole, one way 6 Amps flush type, 230 volts complete all as specified and as directed. |
| 126 | Supply and fixing of modular switch 1 module, single pole, one way 16 Amps flush type, 230 volts complete all as specified and as directed. |
| 127 | Supply and fixing of modular socket outlet 2/3 pin combined, 6 Amp, one way, two module, 230 volts complete all as specified and as directed. |
| 128 | Supply and fixing of modular socket outlet 3/3 pin combined, (6pin), 6 and 16 Amps, one way, two module, 230 volts complete all as specified and as directed. |
| 129 | Supply and fixing of modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed. |
| 130 | Supply and fixing in repair calling bell, ding dong, 230 volt, complete all as specified and as directed. |
| 131 | Supply and fixing ceiling rose surface type 2/3 terminal polycarbonate, isolated body complete all as specified and as directed. |
| 132 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. |
| 133 | Supply and fixing as in repair electronic Fan regulator modular 100 watt, 2 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed. |
| 134 | Supply and fixing in repair LED batten fitting 20 watt, 4 feet, polycarbonate housing with electronic driver cool/warm type, connecting with copper conductor flexible cable from ceiling rose to connector of the light, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LBLN-20-C-SQ of make Orient or equivalent make given in Appx 'B'. |
| 135 | Supply and fixing in repair, LED batten fitting 10-12 watts, 2 feet, aluminium housing with electronic driver cool/warm type industrial model complete, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LUMILINE+ BS10WLED865SPCSS of make Havells or equivalent in make given in Appx 'B'. |
| 136 | Supply and fixing in repair, LED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, IP 65, aluminium housing, surge protection including driver and LED lamp, etc. complete with all accessories, connecting with copper conductor flexible cable from ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. Cat part No. LIBH-10-C-P of make Orient or equivalent in make given in Appx 'B'. |
| 137 | Supply and fixing inverter LED security light luminaire 35 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with 3 to 4 hours battery back up, auto on off all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position, complete all as specified and directed. Cat part NoLED SL 30W HLSLD-ML04-30-CWL-INV-RTC-R of make Halonix or equivalent in make given in Appx 'B'. |
| 138 | Supply and laying as in repair sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 139 | Supply and laying as in repair sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in and including PVC conduit medium grade ISI marked of adequate size for housing the wires, complete all as specified and as directed by the Engineer-in-Charge.Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 140 | Supply and fixing MCB SPN, 40 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed . Cat part No 811035 of make Indoasian or equivalent make given in Appx 'B'. |
| 141 | Supply and fixing MCB SP, 5 to 32 Amps, 240 volt,10 KA , 'B' curve as per site requirement including removing old unserviceable MCB complete all as specified and as directed . Cat part No 811008 to 811015 of make Indoasian or equivalent make given in Appx 'B'. |
| 142 | Supply and fixing sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral with double door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces including removing old unserviceable enclosure complete all as specified and as directed . Cat part No.811828 of make Indo Asian or equivalent make given in Appx 'B'. |
| 143 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA 'B' curve including removing old unserviceable enclosure, complete all as specified and as directed by the Engineer-in-Charge. Cat part No. 811955 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 144 | Supply and fixing sheet metal enclosure triple pole & neutral(TPN) IP-43 including MCB, TPN 63 Amp, 16 KA, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface including removing old unserviceable enclosure , complete all as specified and as directed by the Engineer-in-charge. Cat part No.811841 of make Indo Asian or equivalent in make given in Appx 'B'. |
| 145 | Taking down ceiling fan, cleaning the same and refixing after cleaning in any model/size etc and making all connection using three core copper conductor flexible cable in size 1.5 sqmm including drawn through PVC flexible conduit pipe from ceiling rose to fan connector complete all as specified and directed. |
| 146 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to earthing test point as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm c/c both ways with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing as in repair complete all as directed by Engineer-in-Charge and earth testing on completion. |
| 147 | Note:- Amount of credit of Rs.68,587.00 for retrieved materials is mentioned in Schedule of Credit Page No. 123 & 124 of tender doCubic metre ents in pdf form which will be deducted offline while acceptance of tender. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
