Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Hard/dense soil all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cable / pole etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting it out of the following strata:- |
| 3 | (a) Soft/loose soil |
| 4 | (b) Hard/dense soil |
| 5 | (c) Soft/disintegrated rock |
| 6 | Returning filling in, including spreading,leveling, watering & well ramming in layers n. exc. 25cm thick for any type of soil/rock. all as specified and directed by Engr-in-charge. |
| 7 | Removing excavated in any soil/rock/strata to distance not exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed. |
| 8 | M&L for providing and injecting chemical emulsion for post construction anti termite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300mm including excavating channel along the wall and rodding etc all as specified and directed. |
| 9 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 10 | M&l for PCC type D-2(1:4:8) using 40mm graded crushed stone aggregate as mass conc and filling of foundation all as specfed and drected. |
| 11 | M&l for PCC type C-2(1:3:6) using 40mm graded crushed stone aggregate as surface channel of drain ,complete all as specified and as drected. |
| 12 | M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof padding (Average thickness 50mm thick) ,complete all as specified and as drected. |
| 13 | M & L PCC B1 1:2:4 (12.5mm graded stone aggregate)for in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, holf fast,filling of hollow of pressed steel door frame ,parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating ,complete all as specified and as drected. |
| 14 | M & L Pre-cast cement concrete type C1 1:3:6 (20mm graded stone aggregate) block masonry with solid blocks, exc 10cm in width and setting in in cement mortar 1:6 all as specified and directed. |
| 15 | Supply only liquid waterproofing compound ,complete all as specified and as drected. |
| 16 | Taking up or down steel tubing and connections including cleaning for refixing or removal for 25mm dia ,complete all as specified and as directed, |
| 17 | M & L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 but except stone ,complete all as specified and as drected. |
| 18 | M&L granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ,complete all as specified and as drected. |
| 19 | M&L for 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc. 6 Sqcm and not. exc 13 Sq cm ,complete all as specified and as drected. |
| 20 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints ,complete all as specified and as directed. |
| 21 | S&F 35 mm thick second class hardwood glazed and skeleton shutters divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc.complete all as specified and as directed. |
| 22 | S & F 35. mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides as per manufactures instructions complete all as specified and as directed. |
| 23 | Taking down chowkat with shutter without taking out shutter from the frame n.exc 1.5 Sqm ,complete all as specified and as drected. |
| 24 | Taking down chowkat with shutter without taking out shutter from the frame exc 1.5 and n.exc 4 Sqm each ,complete all as specified and as drected. |
| 25 | Taking down Shutters of description exc 1sq.m and n exc 2 sq. m each ,complete all as specified and as drected. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: Rate quoted are inclusive of stainless steel butt hinges and necessary S S screws) |
| 28 | S&F 150 mm long aluminium, barrel tower bolts of extruded section complete all as specified and as directed. |
| 29 | S&F 250 mm long aluminium sliding door bolt, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 30 | S & F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed. |
| 31 | S&F brass hinges 75mm size extruded with mild steel pin type D-11 ,complete all as specified and as drected. |
| 32 | S&F brass handles extruded fabricated type 100mm size ,complete all as specified and as drected. |
| 33 | S&F 150 mm size aluminium anodised handles, Extruded aluminium alloy handles, abricated type, anodised complete all as specified and as directed. |
| 34 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Overall length of cover plate 150mm ,complete all as specified and as drected. |
| 35 | S&F in repair mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 36 | S &F 100mm length of brass barrel tower bolts,with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed. |
| 37 | S &F 100mm size of hasp and staple safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed. |
| 38 | S &F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 39 | S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. |
| 40 | S&F 1 mm thick mild steel plain black sheet in wall cladding, eaves, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up mitred angles, etc as required. |
| 41 | S& F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-w (Gde E-250 quality A) all as specified and directed. |
| 42 | S & F Rolled Mild Steel roof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc.,complete all as specified and as drected. |
| 43 | S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S 1161-1979 graded St 240 all as specified and directed.(Eaves Baords) |
| 44 | S & F 165 x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed. |
| 45 | S & F aluminium powder coated frame ( miniumum thickness of powder coating 50 micron) for doors widnow, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 46 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For sliding window ) |
| 47 | Material and labour for suspended false ceiling using anodized aluminum snap grid frame work. Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Exposed metal frame ceiling with 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid as per manufacturer instruction all a specified and directed by Enginner in Charge. |
| 48 | M&L 0.60mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified with Hex cap headed self drilling/tapping stainless steel screws M6, 60mm long with 3mm EPDM seal washer etc, all inclusive of labour, scaffolding, T & P and sundries etc.including ridge of same profile with min overlap of 300mm on either side ,complete all as specified and as drected. |
| 49 | M&L 0.60mm thick Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified with Hex cap headed self drilling/tapping stainless steel screws M6, 60mm long with 3mm EPDM seal washer etc, all inclusive of labour, scaffolding ,complete all as specified and as drected. |
| 50 | M&L APP modified membrane minimum weighting 3 Kg/Sqm and minimum 3mm thick with polyster non woven polyster reinforcement Weight not less than 150 gms/Sqm) shall be laid by torch application method and overlapped by 100mm in all sides including waterproofing membrane to be terminated on parapet wall in a V groove of size 25mm x 25mm atleast 300mm above FFL which should be sealed with polymer mortar and applying evenly a tack coat of industrial bitumen 85/25 @ 1.20Kg per Sqm including cleaning of surface to receive PCC tiles ,complete all as specified and as drected. |
| 51 | M&L for 18mm thick plywood HDHMR grade decorative type – I of surface finish (colour & pattern as approved) fixed with approved adhesive as per manufacturer’s instruction finished to approved size as for working table / storage almirah to the size and pattern including hinges, magnetic stoppers, handels etc as shown in Drg and as directed by Engr-in-charge. |
| 52 | M&L for mirror polished machine cut kota stone (595 x 595mm) slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incluidng rubbing and polishing complete including screed bed 20mm thick in cement motar 1:6 complete all as specified and directed. |
| 53 | M & L Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillars one single piece wirh 3 nos of lines engraved at the edge of the tread and laid over cement screed and jointed with over a 10mm thick plaster in CM 1:3 all as specified and directed. |
| 54 | M & L Machine cut cudappah stone slab 18-20mm thick over 10mm thick plaster of cement 1:3 in wall and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (For shelf). |
| 55 | M & L for rounding to edges of stone slab one edge, such as in steps, cooking platfrom and other similar situations all as sepcified and directed. |
| 56 | M&L for 75mm thick PCC 1:3:6 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, plinth protection etc.complete all as specified and directed. |
| 57 | M & L Cement concrete type D2 1:4:8 (40 mm graded stone agg) 75mm thick as in sub floors ,complete all as specified and as drected. |
| 58 | M & L for 100mm thick cement conctre type D-2 1:4:8 (40mm graded stone aggregate) in floors/sub base all as specified and directed. |
| 59 | M&L Glazed Ceramic Coloured Tiles, 450x300/300x600x7mm thick in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed. |
| 60 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors {Superior/Premium quality}, set and jointed in neat cement slurry and pointed in colour cement to match , complete all as specified and as directed. |
| 61 | M&L for Vitrified finish full body size tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed. |
| 62 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 63 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required ,complete all as specified and as drected. |
| 64 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand ,complete all as specified and as drected. |
| 65 | M & L for 10mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. ,complete all as specified and as drected. |
| 66 | M & L for 5mm thick ceiling cement plaster in CM 1:4 on fair faces concrete surfaces and finishing the surface even and smooth (without using extra cement) etc ,complete all as specified and as drected. |
| 67 | M & L rendering 20mm thick on surface of stone masonary surface in CM 1:6 and is to be finished even and smooth with out using extra cement complete all as specified directed |
| 68 | M & L for 20mm thick cement plaster in CM 1:4 on fair faces of stone masonary surfaces and finishing the surface even and smooth (without using extra cement) etc.,complete all as specified and as drected. |
| 69 | M&L for 10 mm thick screed bed with CM 1:3 with water proofing compound @3% by weight of cement finish even and smooth surfaces using without extra cement applied on padding concrete when concrete is still green, water proofing compound shall be measured and paid seperately as directed by Engineer-in-Charge. |
| 70 | M & L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 all as specified and directed. |
| 71 | M&L for 1mm thick wall care putty on wall all as specified and directed by Engr in Charge. |
| 72 | Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc ,complete all as specified and as drected. |
| 73 | Complete removal of existing treatment on walls ,complete all as specified and as drected. |
| 74 | M&L for Preparation of ceiling surfaces and applying two coats of white wash on surface of on ceiling /soffits of slabs, chajjas all as specified and as directed. |
| 75 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than than 50gm/litre and UV resistance as per IS 15489:2004 Alkali and fungal resistance, dirt resistance exterior paint or required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.9 litre/10 sqm over new surfaces/old surfaces of wall by mechanical means using suitable tools and plants all as specified and directed. |
| 76 | M & L for distmepring with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved munufacutre of required shade and colour by mechanical means using suitable tools and plants complete as per munufacuters specification two or more coat on new work all as specified and directed. |
| 77 | S&F 4.0 mm thick sheet glass, selected quality and glazing with suitable arrangements to aluminium window/ventilators shutters in square n exc 0.5 sqm in each pane frosted on one side ,complete all as specified and as drected. |
| 78 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified and directed by Engr -in-Charge. |
| 79 | M & L for Preparation of new wooden surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over pink primer for material and labour ,complete all as specified and as drected. |
| 80 | M & L for Preparation of new steel/iron surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paint over red oxide primer ,complete all as specified and as drected. |
| 81 | Supply and fix GI Pipe Light grade with all connected accessories of sizes 50 mm dia complete all as specified and directed by Engr-in-Charge. |
| 82 | Taking up or taking down existing steel tubing and connections including cleaning for refixing or removal to store for the following sizes complete all as specified and directed :- |
| 83 | (a) 50 mm (2\\") dia. |
| 84 | (b) 40 mm (3/2\\") dia. |
| 85 | (c) 25 mm (1\\") dia. |
| 86 | Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches of following sizes complete all as specified and as directed :- |
| 87 | (a) 50 mm (2\\") dia. |
| 88 | (b) 40 mm (3/2\\") dia. |
| 89 | (c) 25 mm (1\\") dia. |
| 90 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 15mm dia ,complete all as specified and as drected. |
| 91 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal 20mm dia ,complete all as specified and as drected. |
| 92 | Supply and laying and concealed for 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) on walls/ceiling or laying in floors complete all as specified and directed |
| 93 | M&L for GI tubing 25mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs ,complete all as specified and as drected. |
| 94 | M&L for cutting chases, pinning in making good to face for concealed water tubing in stone concrete blocks or slab walls all as specified and directed. |
| 95 | Dismantling water tank exc 500 and n exc 1000 ltrs and remvoing to all as specified and directed. |
| 96 | M&L in repair for 15 mm bore bib tap chromium plated cast copper alloy with wall flange Minimum weight 450gms complete all as specified and directed. |
| 97 | S & F in repair Angular stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle, fancy type chromium plated 15mm bore dia of pipe minimum wight 450gms complete all as directed by Engineer-in-Charge. |
| 98 | S & F for Gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe complete all as specified and as directed of followin sizes including removal of old extg one complete all as specified and directed. |
| 99 | (a) 50 mm (2\\") dia. |
| 100 | (b) 40 mm (1.5\\") dia. |
| 101 | (b) 25 mm (1\\") dia. |
| 102 | S&F in repair 15 mm dia CP brass PVC connection 45 cm long including check nuts etc complete all as specified and directed |
| 103 | S&F universal type, three layer & white colour rotational moulded polyethylene water storage tank of 750 ltr capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with 25 mm ball valve high pressure PTMT with rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge. |
| 104 | S &F UPVC (SWR) bends Type B with oval acess door 75mm dia ,complete all as specified and as drected. |
| 105 | S &F UPVC (SWR) bends Type B with oval acess door 110mm dia ,complete all as specified and as drected. |
| 106 | S &F 110mm UPVC (SWR) Type B junction single (Single T) equal or unequal with acess door ,complete all as specified and as drected. |
| 107 | S &F 75mm UPVC (SWR) Type B junction single (Single T) equal or unequal with acess door ,complete all as specified and as drected. |
| 108 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) , Pedestal pan and trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete, Plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified and directed. |
| 109 | S & F in repair PVC valveless , syphonic action type , flushing cistern ,low level dual type of capacity 10 liters white with inlet , ball valve , float and handle incl brackets ISI Marked incl 32mm PVC flush pipe ,complete all as specified and as drected. |
| 110 | S & F chromium plated shower rose 125mm size with or without swivel joints any size including fixing of steel pipe or union ,complete all as specified and as drected. |
| 111 | S & F Vitreous China wash basin (oval type/counter type) , white, round, size 550x450 including waste, chain and plug and porcelain stopper but including brackets,450mm PVC connection with barass screws, waste coupling, 32 mm dia ,complete all as specified and as drected. |
| 112 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified . |
| 113 | S & F 75 mm bore UPVC (SWR) pipes Type B single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor ,complete all as specified and as drected. |
| 114 | S & F 110 mm bore UPVC (SWR) pipes Type B single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor ,complete all as specified and as drected. |
| 115 | S &F UPVC (SWR) Type B cowls of 75mm dia ,complete all as specified and as drected. |
| 116 | S &F UPVC (SWR) Type B cowls of 110mm dia ,complete all as specified and as drected. |
| 117 | S &F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. |
| 118 | M&L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 100mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition ,complete all as specified and as drected. |
| 119 | M&L for PCC (1:3:6) type C2 concrete bed to drain pipes of dia 150mm dia including packing under and haunching against the sides of pipes after they laid and tested.as reqd on ground condition ,complete all as specified and as drected. |
| 120 | M & L for 100mm dia salt-glazed stoneware drain pipes laid in trenches and jointed ,complete all as specified and as drected. |
| 121 | M&L for 150mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and directed. |
| 122 | M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required 150mm Dia complete all as specified and directed. ( Note : Work in Foule Position |
| 123 | M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches and walls ,complete all as specified and as drected. |
| 124 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ ducts, on poles etc of following sizes complete all as specified and directed |
| 125 | a) 3.5 Core x 70 Sqmm |
| 126 | b) 3.5 Core x 50 Sqmm |
| 127 | c) 3.5 Core x 35 Sqmm |
| 128 | d) 4 Core x 25 Sqmm |
| 129 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed |
| 130 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 131 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC casing & caping of white/ ivory colour including all accessories surface on wall/ceiling etc, heavy duty, double locked system, ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 132 | (a) One light point controlled by one, one way switch 5 Amps |
| 133 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 134 | (c ) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 135 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 136 | (e ) One bell point controlled by one, bell switch 5 Amps |
| 137 | Ditto as per Srl item No122.00 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly ,complete all as specified and directed. |
| 138 | Ditto as per Srl item No122.00 here in before but using 4.0 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly ,complete all as specified and directed. |
| 139 | Supply and fix ceiling rose surface type bakelite / PVC three terminal 65x50 mm ,complete all as specified and directed. |
| 140 | Taking down existing Geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M for safe custody ,complete all as specified and as directed. |
| 141 | Labour only for refixing the water heater storage type (Geyser) any type obtained from item No 126 above as per site requirement including provn of 04 Nos of hold fashner nuts required suitable size fixed in brick wall, all necessary electrical & water supply connections with PVC connection pipe hot & cold ,complete all as specified and directed. |
| 142 | Taking down existing ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan abd fan blades and deposit to MES store yard of AGE E/M for safe custody complete all as specified and as directed. |
| 143 | Labour only for refixing the celing fan obtained from item No 128 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. Note :- Cost included paintiing of Fan & writing MES No all as required . |
| 144 | Labour only for refixing the Exhaust fan obtained from item No 128 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. Note :- Cost included paintiing of Fan & writing MES No all as required . |
| 145 | S & F for MCB Single pole and neutral rated capacity SPN 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 146 | S & F for MCB Single pole rated capacity SP 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 147 | S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 148 | S & F for LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and as directed. |
| 149 | S & F for modular switch flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 150 | S & F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 151 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 152 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 153 | S & F for modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 154 | S & F for modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 155 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 156 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.(for Servent qtr) |
| 157 | M & L for earth continuity conductor fixed to wall/ floor/ drawn in holes/conduits or any situation as directed of size GI earth wire 4 mm dia including jointing necessary GI Protection light grade pipe 15 mm dia and strips with nuts bolts complete all as specified and as directed. |
| 158 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 159 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6.0 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sq mm cable,one run of 6.0 sq mm cable and one run of PVC conduit will be measured as one unit |
| 160 | S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 25 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed. |
| 161 | M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection |
| 162 | Demolition or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings dressed stonework and precast concrete articles all as specified and directed. |
| 163 | Demolition of brick work or stone boulder masonary, built in cement mortar or cement lime mortar |
| 164 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. liad in any type of motar all as specified and directed. |
| 165 | Demolition of cement concrete (un-reinforced) in ground floors and paving's not exc 15 cm thickness (below or above ground level) |
| 166 | Demolition of any old unserviceable roof treatment of any description including roof tiles/padding etc to expose the RCC Slab of roof, cleaning, washing & rubbing all as specified and directed. |
| 167 | Dismantling timber in fillets rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work |
| 168 | Dismantling framed work timber (truss) scantlings sq.m and over in section in any position all a specified and directed. |
| 169 | Dismantling battens exc 15cm for tiles any size incl tilting fillets ,complete all as specified and directed. |
| 170 | Dismantling single layer Mangalore pattern tiles or similar tiles in roofing ,complete all as specified and directed. |
| 171 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge |
| 172 | Demolition and breaking up drain pipes (Salt glazed ware /PVC/ AC or Reinforced concrete) set in cement mortar (75mm dia) |
| 173 | Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 174 | Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mportar |
| 175 | Demolition of cement concrete reinforced in ground floors/roofs and paving's exc 15 cm thickness (below or above ground level) |
| 176 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 177 | S & F for Modular type TV Socket out let complete all as specified and as directed. |
| 178 | S & F for Modular type three pin socket 3 pin 16/20 Amps with plug top On/ Off switch suitable for 230 volt 50 Hz AC supply complete all as specified and as directed |
| 179 | S & F for Decorative wall mounted luminaire made out of Light opal glass with crome finish wall lamp suitable for LED bulb and provision of LED bulb 5 Watts complete all as specified and as directed. Make/Model No: Jaquar (Model No DBL/CHR-Mb 12021341 A) or equivalent as per Make given in Tender document |
| 180 | Supply, installation, commissioning and testing indoor type LT panel board of suitable size factory made TTA panel, weather, dust & vermin proof indoor, double door, front openable, locking arrangements made out of 2.00 mm thick mild steel CRCA sheet including required comparment for fixing of four (06) Nos single phase smart meter, MCCB and MCB and porviding glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB output of suitable length for connection of cable from main busbar, angle iron 50 mm x 50 mm x 5 mm thick supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces for 3 phase 4 wire system 415/ 440 volts grade including internal wiring connections for all outgoing / incomming cable, earthing teminals , danger plate, suitable PCC platform complete all as directed by Engineer-in-Charge. INCOMMING (a) Copper strip busbar of size 40x 6 mm thick wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links -01 No. (c) Digital multifunctional meter to read voltage, Amps, frequency etc , flush mounting typel with selector switch – 01 No. (d) LED Neon indicator lamp (RYB) with holder,230/250 volts,AC -01 set (set of three) OUTGOING (a) MCB, single pole & neutral, 5-32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 6 Nos (b) Slot for fixing the single phase smart prepaid meter - 06 Nos |
| 181 | Supply, installation, commissioning and testing indoor type LT panel board of suitable size factory made TTA panel, weather, dust & vermin proof indoor, double door, front openable, locking arrangements made out of 2.00 mm thick mild steel CRCA sheet including required comparment for fixing of four (10) Nos single phase smart meter, MCCB and MCB and porviding glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB output of suitable length for connection of cable from main busbar, angle iron 50 mm x 50 mm x 5 mm thick supporting frame including applying two coats of powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces for 3 phase 4 wire system 415/ 440 volts grade including internal wiring connections for all outgoing / incomming cable, earthing teminals , danger plate, suitable PCC platform complete all as directed by Engineer-in-Charge. INCOMMING (a) Copper strip busbar of size 40x 6 mm thick wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 nos. (b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links -01 No. (c) Digital multifunctional meter to read voltage, Amps, frequency etc , flush mounting typel with selector switch – 01 No. (d) LED Neon indicator lamp (RYB) with holder,230/250 volts,AC -01 set (set of three) OUTGOING (a) MCB, single pole & neutral, 5-32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 10 Nos (b) Slot for fixing the single phase smart prepaid meter - 10 Nos |
| 182 | M & L for maintenance free Chemical earthing of technology with copper bonded steel rod 3 mtr long 25.0 mm dia with 250-micron Copper bonded coating and UL listed. There should be terminal for connection of 150 x 50 x 6 mm with 4 holes of 12 mm dia along with 2 bags of 25 Kgs each of earth enhancing compound. The chemical compound should be tested and certified by any NABL accredited laboratory with 95 percent carbon content. The testing laboratory should be an ISO 9001 and 14001 certified. The earth enhancing compound should be IEC 62321. The ph value of compound should be 7-8. Electrode should be duly tested and certified by CPRI, Govt of India for a min short circuit current of 25 kA rms for 1 Sec. including necessary boring of suitable dia upto required depth in any type of soil for inserting copper rod and filling of chemicals and Poly plastic pit cover of material- polymer body & cover dimensions- 308 mm (L) x 308 mm (W) x 214 mm (H) bearing capacity 7.5 Ton approved from NABL approved Lab complete all as specified and as directed. Note:- (i) Earthing is to be done infront of the Engr-in-Charge. (ii) Test Results of earthing to be submitted by the contractor for all earthings. (iii) The Contractor shall have to give written guarantee for maintenance earth resistance of less than 1.0 Ohm for the period of 10 9ten) years after certified date of completion and shall bdeposited 2000/- per earthing as security deposit for a period of Ten (10) Years. (iv) Failing to maintain resistance of earthing less than 01.0 ohm , new earthing to be provided by the contractor with out any extra cost. (v) Necessary earth work, excavation shall be carried out in any type of soil strata, retuning, filling in and making good surronding area complete. |
| 183 | Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed. |
| 184 | M&L for Brick massonry valve pit of size 450 mm x 450 mm x 700 mm (internal) with neceaasry excavation and earth work, PCC 1:3:6 in foundation brick work in CM 1:6, 15 mm thick rendering in CM 1:4 (internally ) , 5 mm thick M/S plate cover incl M.S angle iron frame including material & labour for preparation of new iron surface & appllying two coat of synthetic enamel paint over a coat of red oxide primer with and including locking arrangement complete all as specified and directed. |
| 185 | S & F in repair frameless curved edge rectangular in shape 5mm thick wall mounted bevelled edge mirror fixed with wooden plugs with chromium plated brass screws and cup washers all as specified. |
| 186 | Material and labour for single pipe in kitchen duct pipeline for waste water down take pipe fixing done with pipe supporting clamping system consisting of profile bracket + continuous slotted C channel + U Bolt R/M system - one waste water pipe 2 1/2\\" PVC (75 mm) running vertically with wall distance 3\\": Pipe Support Clamping shall be made of the following:(i) Profile bracket having wall distance 3\\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304, Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. (ii) Continuous Slotted \\"C\\" Channel with ribs to be used of size 10\\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm.(iii) U bolt R/M made of low carbon mild steel with rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1.Material Qty for one unit: (a) Profile Bracket Wall distance 3\\" - 2 Nos. (b) Continuous Slotted C Channel of Size 10\\" - 1 No.; (c) U Bolt R/M for 2 1/2\\" PVC (75 mm) Pipe Dia. - 1 No. (d) Justi Khilla 2 1/2\\" Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing : CEAG/AR/TD/08R. Make: Shaivi or equivalent as approved by GE. |
| 187 | Material and labour for single pipe in toilet duct pipelines for soil water down take pipe, fixing done with pipe supporting clamping system consisting of profile bracket + continuous slotted C channel + U Bolt R/M system - one soil water pipe 4\\" PVC (110 mm) running vertically with wall distance 3\\", Pipe Support Clamping shall be made of the following:(i) Profile Bracket having Wall Distance 3\\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.(ii) Continuous Slotted \\"C\\" Channel with ribs to be used of size 10\\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. (iii) U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty for one unit : (a) Profile Bracket Wall distance 3\\" - 2 Nos. (b) Continuous Slotted C Channel of Size 10\\" - 1 No.; (c) U Bolt R/M for 4\\" PVC (110 mm) Pipe Dia. - 1 No.; (d) Justi Khilla 2 1/2\\" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing : CEAG/AR/TD/08R. Make: Shaivi or equivalent as approved by GE. |
| 188 | M&L for cutting shrubs, wild growth/vegetations and removal of plant growth by grubbing out shrubs/plants/any vegetation growth n.exc 10cm girth including cutting of trunk portion protruding outside the walls/roof, digging out roots and application of chemical Glyphosate solution (4% concentration) as per manufactures instructions by injecting in stem of plants and roots as directed and removing complete vegetation growth from walls including taking out roots from roof/stone/ block masonary work and making good the distrubed surfaces with PCC 1:2:4 type B0 and disposing off the rubbish from the site outside MoD land, for up to four storey buildings (incl scaffolding) complete all as specified and directed. |
| 189 | S&F almunium powder coated louvers concealed type for ventillator size 0.60X0.45 / 0.60X0.90 having arrangement of 4/6 blades fixed to almunium frame complete all as specified. |
| 190 | Supply and Fix factory made precast FRP manhole covers 900x900x75mm thick all as specified and directed. |
| 191 | Cutting of existing road not exc 1.5 mtr in depth and not exceeding 1.5 mtr wide including black top, sub base and WBM, well ramming in layers with watering after laying of RCC /GI pipe under road making good in all respect to match with the existing surface all as directed by E-in-charge. |
| 192 | S&F in repair for 15 mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated with swan neck (Height 300mm) screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of minimum weight 450 gms complete all as specified and directed . |
| 193 | S &F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 194 | S &F Two way bib cock with wall flange 15mm dia of minimum weight 450 to 480gms complete all as specified and directed. |
| 195 | S & F CP wall mixer 3-in-1 system with provision for both hand shower and over head shower complete with 115mm long bend pipe connecting legs and wall flange (wihtout hand and over head shower) all as specified and directed. |
| 196 | S&F wall mounted corner glass shelves of size 230x230mm of 5mm thick toughed hlass with brackets fixed on wall with chromium plated U-Clips complete all as specified and directed. |
| 197 | S &Fstainless steel Soap dish made of stainless steel approximate size 100x75mm fixed to plugs with chromium plated brass screws all as specified and dirrected. |
| 198 | S & F stainless steel fancy type curtain rod 20 mm bore including fixing and decorative type two sides brackets all as specified & as directed. |
| 199 | S&F double wall corrugated (DWC) pipe Class SN 4,size 63 mm outer dia,including lying in trenches for passing cables etc complete all as specified & as directed. |
| 200 | S&F double wall corrugated (DWC) pipe Class SN 4,size 50 mm outer dia,including lying in trenches for passing cables etc complete all as specified & as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
