|
| 1 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 2 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l. |
| 3 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 4 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 5 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile B Fixing with adjustable lugs with split end tail to each jamb m |
| 6 | Supplying, fitting and fixing 35 mm thick solid core type decorative single leaf flush door shutter with one sides teak decorative and another side commercial veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 7 | Supplying, fitting and fixing 35 mm thick solid core type non-decorative double leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l. |
| 8 | Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l. |
| 9 | Supplying and fixing rolling shutters of approved make, made of requiredsize M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 10 | Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l. |
| 11 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/l. |
| 12 | Providing two coats of snowcem of approved shade and make over old surface including washing cleaning, and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/l. |
| 13 | Providing 25mm thick 2nd class patent stone flooring (1:3:5) with 12 mm to 6 mm size graded stone chips and top layers 6 mm thick (1:3) with 6 mm down stone chips in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White,Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. |
| 15 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direction of E/l.With commercial grade white 15 x 15 cm tiles. |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. impet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cuttingto size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 18 | Providing ridges or hips of width 60 cm overall width plain G.S. Sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m² |
| 19 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3) on RCC Roof with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 20 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface omplete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM,D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 21 | Supplying, fitting and fixing 4 mm Plain glass panes including supplying putty, beads and nails after taking out old and broken glass panes and disposal of debris all complete as per building specification and direction of E/l.4 mm plain. |
| 22 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm ominal size derived from natural sources) over 75mmthick bed of dry brick ballast 40 mm nominal size, well rammed andconsolidated and grouted with fine sand, including ecessary excavation,levelling & dressing & finishing the top smooth |
| 23 | Providing 250mm. wide brick drain in cement mortar (1:6) with av. 250mm. clear depth and 250mm. apron including cost of earthwork involved with 75 mm. ~ cement concrete (1:4:8) over one brick designation 75b flat soling in proper grade and slope at the base, the drain duly plastered in C.M.(1:3) with punning over exposed surface all complete as per building specification and direction of E/l. |
| 24 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 MM Rain water pipe |
| 25 | Shoe-110 |
| 26 | Coupler-110 mm |
| 27 | Bend-110 mm |
| 28 | Carriage of Materials (A) Sand av lead 20 K M |
| 29 | (B) Bricks av lead 15 K M |
| 30 | ( C ) Chipes av lead 15 K M |
| 31 | ( D ) Metal av lead 15 K M |
| 32 | Laying of G.I pipes of approved make in trenches with red lead and yarn with socket and screw joints, and cutting pipes to size and threading ends where necessary etc. all complete as per specification and direction of E/l ( Pipes to be supplied departmentally free of cost ) (a) 15 mm dia G.I. Pipe |
| 33 | (b) 20 mm dia G.I. Pipe |
| 34 | Ic) 25 mm -Jia G.I. Pipe |
| 35 | (d) 32 mm dia G.I. Pipe |
| 36 | Supplying labour and tools for fixing G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketted joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of E/l. (Pipe with socket to be supplied deparmentally free of cost ).(a) 15 mm dia G.I. Pipe |
| 37 | (b) 20 mm dia G.I. Pipe |
| 38 | (c) 25 mm dia G.I Pipe |
| 39 | (d) 32 mm dia G.I. Pipe |
| 40 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality (wt not less than 350 gms) with extra socket all complete as per specification and direction of E/l. |
| 41 | Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/l.BRASS STOP COCK(a) 15 mm dia |
| 42 | Providing and fixing G.M. non return valve Horizontal / vertical type of approved quality as per specification and direction of E/l.(A) Horizontal (4) 32 mm dia |
| 43 | (B) Vertical(3) 25 mm dia |
| 44 | (4) 32 mm dia |
| 45 | Supplying and fixing G.I fittings of approved make all complete as per specification and direction of E/l.(A) Elbow(a) 15 mm dia |
| 46 | (b)20 mm dia |
| 47 | ( c ) 25 mm dia |
| 48 | (d) 32 mm dia |
| 49 | (Bl TEE (PLAIN)(a) 15 mm dia |
| 50 | (b) 20 mm dia |
| 51 | (c) 25 mm dia |
| 52 | (d) 32 mm dia |
| 53 | (C) REDUCING SOCKET(b) 20 mm dia |
| 54 | (c) 25 mm dia |
| 55 | (d) 32 mm dia |
| 56 | (D) Nipple(a) 15 mm dia |
| 57 | (b) 20 mm dia |
| 58 | (c) 25 mm dia |
| 59 | (d) 32 mm dia |
| 60 | (E) PLUG(a) 15 mm dia |
| 61 | (b) 20 mm dia |
| 62 | [c) 25 mm dia |
| 63 | (d) 32 mm dia |
| 64 | (F) Reducing Tee Plain (Taking larger dimension)(b) 20 mm dia |
| 65 | (c) 25 mm dia |
| 66 | (d) 32 mm dia |
| 67 | (G) UNION SOCKET(b) 20 mm dia |
| 68 | c) 25 mm dia |
| 69 | (d) 32 mm dia |
| 70 | (H ) SOCKET PLAIN(b) 20 mm dia |
| 71 | (c) 25 mm dia |
| 72 | (d) 32 mm dia |
| 73 | Making holes in walls for laying G.I pipes and restoring the same after pipe laying as per specification and direction of E/l.(a) 125 mm thick wall. |
| 74 | (b) 250 mm thick wall. |
| 75 | Supplying, fitting and fixing the following items complete with all materials as per specification and direction of E/l.(a) (i) 600 x 125 mm glass self complete |
| 76 | (b) Mirrors of 6 mm thick with plate glass bevelied edge mirror imcluding C.P.brass revolving fittings ply wood board and C.P.Hinges to fix with mirror (600 mm x 450 mm size) |
| 77 | (c) 600x20 mm C.P. towel rail |
| 78 | (c)iii C.P. brass liquid soap container |
| 79 | Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of Parry Hindustan or any other I.S.S. approved make with 100 mm H.C.I., \\"p\\" trap 15 litres C.I.. or C. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I. body brass spindle stop cock of weight not less than 50 grms. 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.(c) with 12.5 lit. low level P.V.C. cistern |
| 80 | Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with \\"p\\" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l.ii (b) 12.5 lit. low level PVC Cistern |
| 81 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of \\"Hindustan\\" \\" Parry\\" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l.(A) Flat back or standing corner( 600 mm x 350 mm ) |
| 82 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.l. or R.S. brackets 32 m C.I. brass waste 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32 mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 83 | Earth work in excavation for laying of different types and sizes of R.C.C. spun pipes with disposal of excavated earth within initial lead and lift as per specification and direction of E/l.(a) For classification of soil item- A |
| 84 | Labour for laying, fitting and fixing NP2 R.C.C. spun pipe with collars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leak proof including providing sight rails, bonning rod, night guard, red light and barrier etc. all complete as per specification and direction of E/l.150 mm dia R.C.C. spun pipe Upto 3.0 meter depth of invert below G.L. |
| 85 | 225 mm dia R.C.C. spun pipe Upto 3.0 meter depth of invert below G.L. |
| 86 | Supplying materials and labours for construction inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l. |
| 87 | Supplying fitting & fixing of PVC water tank … all comp. Job. |
| 88 | Providing & fixing 15 mm size pillar cock C.I. body brass spindel pillar cock of approved quality as per specification & direction of E/I. |
| 89 | Providing and fixing PTMT grating of approved quality and colour.Circular type |
| 90 | Add GST 18 % |
| 91 | Add L.Cess 1 % Please Enable Macros to View BoQ information |
