|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to floor V level in Cement mortar 1:4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 4 | Providing and fixing 40mm (fouty milimeter) thick second class deodar wood panelledglazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters withframe of 1st class deodar wood for cup board including nickel plated bright finished piano hinges -25mm thick frame including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Providing and fixing 19mm (Ninty milimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing 4mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) |
| 8 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) |
| 9 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. |
| 10 | Providing and fixing 1st Class deodar wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete. |
| 11 | Providing and fixing 40mm (fouty milimeter) thick with 2nd class deodar wood. wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including brightclerestorey windows including bright finished black enamelled iron hinges with necessary screws. in including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per thedirection of the Engineer-in-charge. |
| 12 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 13 | Laying and Jointing PVC Pipe. Heading |
| 14 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using |
| 15 | Brick work in C.M 1:5 mix using 2nd class ground moulded chamber burnt bricks with including cost |
| 16 | Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | 300 x 10 mm |
| 18 | 200 x 10 mm |
| 19 | 150 x 10 mm |
| 20 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 21 | 125mm size |
| 22 | 100mm size |
| 23 | Providing and fixing 150 mm bright /matt finished Stainless Steel Hooks and Eyes of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form work complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 25 | In stair cases with sloping or stepped soffits excluding landing in all floor level in all heights. |
| 26 | walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc. |
| 27 | Providing and laying reinforced cement concrete 1:1½:3 ( One cement one and half sand isto three crushed stone aggregate 20mm. (twenty milimetre) nominal size mechanically mixed and vibrated curing complete excluding the cost of form work in Stair case and back wall of 2nd floor and reinforcement for reinforced concrete work and as per PWD specification o 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 28 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. (Reinforcement cement concrete) work including straightening, cutting, bending, placing in position and binding complete including cost of binding wire Complete plinth level upto floor all level complete, Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 29 | Providing and laying cement cocnrete work 1:2:4 ( One cement two sand isto four crushed stone aggregate 20mm. (twenty milimetre) nominal size) mechanically mixed and vibrated including curing complete including form work and reinforcement for reinforced concrete work as per HP.PWD specification of 1990 volume-1 including carriage of material, labour, tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge in moulding in cornices, window sills etc. in all floor level in all heights. |
| 30 | Providing and laying Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) 40 mm (Fouty milimeter) thick with 20 mm (Twenty milimeter) nominal size stone aggregate finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 31 | Providing and laying 15 mm Thick Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 32 | Providing and laying mirror polished 19 mm (ninteen milimeter) thick Kota stone minimum Size 55X55cm (fifty five into fifty five centimeter) of uniform colour in flooring of approved shade as per detail slab flooring over 20 mm (twenty milimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 33 | Providing and laying marble work (Table rubbed and polished) in flooring 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble. 20 mm thick White makrana marble including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 34 | Kota stone slabs 25 mm (twenty five milimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (tweleve milimeter) (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 36 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 38 | Providing and fixing Valley 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing 15cm wide 45cm overall semicircular plain GI sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 0.63mm thick GI sheet |
| 40 | Providing and fixing 150 mm (One hundred fifty milimeter) diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 41 | Providing steel work of TATA, Sail or RASHTRIYA ISPAT welded in built up sections/ hollow section truesses and framed work, including cutting hoisting and fixing in position and applying a priming coat of red lead paint in beams, joists, channels, angles tee flats with connection plates or angle cleats as in main and cross beams, hp and rafters, purlins connected to main rafters and the like and as per HPPWD specifications of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 42 | Providing and fixing M.S. BP Sheet 1.66mm to 20mm (One point sixty six to twenty milimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 43 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (Twenty into ten into two milimeter) and braced with flat iron diagonals 20x5 mm (Twenty into five milimeter) size, with top and bottom rail of T-iron 40x40x6 mm (Fouty into fouty into six), with 40 mm (fouty milimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 44 | Providind and fixing Grilled Door shutter and applying coat of priming coat complete in all respect including applying a priming coat of approved steel primer. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 45 | Providind and fixing 100 mm dia G.M.S Tube (medium grade) embedded in Cement Concrete 1:2:4 (One cement two sand isto four crushed stone aggregate 20mm. (twenty milimetre) nominal size) block and tie with tress including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 46 | Porch |
| 47 | Courtyard Parapets |
| 48 | Providind and fixing mild steel (M.S) screen as per architual drawing and detail complete in all respect including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 49 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease ,dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink including applying a priming coat of red lead paint as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 50 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 51 | Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 52 | 6 mm ( six millimetre )Thick plaster on cement concrete or reinforced cement concrete work with a cement mortar 1:4(one cement : four fine sand) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 53 | 15mm thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:6 (1 cement: 6 sand) upto floor two level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 54 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 55 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in new work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 56 | Applying priming coat on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 57 | Painting Two coats (excluding primming coat) on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 58 | Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 59 | Painting Two coats (excluding primming coat) on over new steel & other metal surfacesafter and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 60 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 61 | Cement concrete pavement (25 mm to 50 mm thick) with 1:2:4 (1 cement :2 sand :4 stone aggregate 20 mm nominal size) including finishing with a floating coat of neat cement complete as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 62 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 63 | Providing and laying 15 mm (Fifteen milimeter) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 64 | Providing and laying 20 mm (Twenty milimeter) nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 65 | Providing and fixing 20 mm dia (Twenty milimeter) brass bib tap (Superior or heavy type) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 66 | Providing and fixing 20 mm dia (Twenty milimeter) brass bib tap with capstan head including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 67 | Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | Providing and fixing 15 mm (Fifteen milimeter) nominal bore uplasticised PVC connection pipe with brass unions 30 cm length including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 69 | Providing and fixing Flat back 630mmx450mm (Six hundred Thirty into four hundred thirty) vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 70 | Providing and fixing vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 71 | Providing and fixing 600mm x 450 x 150 mm kitchen sink with C.I. Or M.S brackets, painted white including cutting holes in walls and making good the same but excluding fittings including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 72 | Providing and fixing 32 mm dia (Thirty two millimeter) C.P. Brass S. Trap for wash basin and sink including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 73 | Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste for wash basin or sink complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Providing and fixing 600x450 mm (Six hundred into four hundred fifty milimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. . |
| 75 | Providing and fixing 750 mmx20mm (seven hundred fifty into twenty milimeter) size C.P Brass towel rail complete with C.P Brass brackets fixed to wooden lugs with C.P brass screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and fixing 100 mm (One hundred milimeter) sand cast Iron grating for gully trap. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 600x120x5 mm (Six hundred into one hundred twenty into five milimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Providing and fixing 110 x 90 mm (One hundred ten into ninty milimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 80 | Providing and fixing Angle Indian Universal vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 81 | Providing and fixing 10.00 litres capacity PVC vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 82 | Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, mosquito proof lid, C.P. Brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 83 | Providing and fixing 150 mm dia (One hundred fifty milimeter ) PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 84 | Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 85 | 110mm (One hundred ten milimeter) nominal bore/diameters |
| 86 | 150mm (One hundred fifty milimeter) nominal bore/diameters |
| 87 | Providing and fixing 110 mm dia (One hundred ten milimeter) high pressure PVC spigot and socket waste and ventilating pipe ISI marked including fixing with approved adhesive etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing 150 mm (One hundred fifty milimeter) dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing 100 mm dia. (One hundred milimeter) PVC Cowl for waste and ventilating pipes ISI marked including fixing with approved adhesive etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing ) high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero zeo to four point six millimetre) of Finolex/Vectus/Relience including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 91 | 110mm (One hundred ten milimeter) nominal bore/diameters |
| 92 | 150mm (One hundred fifty milimeter) nominal bore/diameters |
| 93 | Providing and laying (to level or slopes) and jointing with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 sand) salt glazed stoneware pipes grade 'A' of the following internal diameters including testing of pipes and joints complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 94 | 150mm (One hundred fifty milimeter) |
| 95 | 100mm (One hundred milimeter) |
| 96 | Providing and fixing M.S. stay and clamps for sand cast iron / cast (spun) iron pipes including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 97 | 100mm (One hundred milimeter) |
| 98 | 75 mm dia (Seventy five milimeter) |
| 99 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 15 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninty into einghty centimeter) and 45 cm fouty five centimeter) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten) internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 100 | Construction chamber 300mm x 300mmx500mm inside size for stop cock with C.I. surface box 100mm x 100 mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 75mm thick foundation concrete 1:5:10 (1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete with 100 mm thick walls of brick masonry in cement mortar 1:5 (1 cement: 5 sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 101 | Providing and fixing 2000 liter net capacity PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 102 | Providing and fixing P.V.C single equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | 150mm (One hundred fifty milimeter) dia |
| 104 | 110mm (One hundred ten milimeter) dia |
| 105 | Providsienpgaraatnedly. fixing vitreous China wash down,Orissa Pattern water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Please Enable Macros to View BoQ information |
