Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc.mechanical means in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetra consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the engineer in charge including carriage of material in all leads and lifts disposed material to be neatly dressed leveled as per instructions of the Engineer in charge.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto any leads and lifts also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 3 | Supplying and filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 4 | Supplying of stone soling/boulder filling dry hand packed in under floor including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 5 | Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 6 | Providing form work with steel plates 3.15 mm( three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give a fair finish including centering shuttering strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 7 | Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 8 | Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give a fair finish including centering ,shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth and heights /thickness including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 9 | Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and break in floors and walls etc. upto any width and height complete including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge. The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 10 | Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre)size so as to give a fair finish including centering ,shuttering, strutting and propping etc with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete including carriage of materials within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 11 | Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in all work upto plinth level including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 12 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content not less than 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 13 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content not less than 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 14 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content not less than 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars in walls (any thickness) , posts and struts up to all heights complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 15 | Providing and laying damp proof course 40mm (forty millimeter) thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter ) nominal size and curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 16 | Providing and applying a coat of residual petrolum bitumen grade of VG-10 of approved quality using 1.70 kg. (one point seventy kilogramme)per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 17 | Providing in RCC work smooth finishing of the exposed surface with 6mm thick cement mortor 1:3(One cement:three sand) in all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 18 | Providing and laying mild steel medium tensite steel bars tor steel (Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL) make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 19 | Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4(one cement: four sand ) including curing complete in any depth/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 20 | Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor level /height in all shapes and size cement mortar 1:6 (one cement: six sand ) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 21 | Half brick masonry with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 bricks in cement mortor 1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 22 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections as approved Hindal Co., Jindal Indian Aluminum Co. approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws upto any floor level/height all complete for doors windows and ventilatiors and glazed partitions frames as per architectural drawings including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 23 | Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections as approved make Hindal Co., Jindal Aluminum Co. conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera . Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screwsupto any floor level/height all complete for shutters of doors windows and ventilatiors including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/ neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) as per architectural drawings including entire carriage of material within all leads and lifts and other incidentials as per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 24 | Providing and fixing 4mm(four millimetre) thick ACP sheet of approved quality fixed to wooden/steel with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 25 | Providing and fixing 6 mm(six millimetre) thick backalite prelaminated sheet of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete as per direction of the Engineer-in-charge including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 26 | Providing and fixing 19mm(ninteen millimetre) (HDHMR BOTH SIDE prelaminated) thick water proof termite resistant(Box type) including shelves and back side of wall and shutters with edge bending with adhesivle in front of shutter fixing 1mm thick sunmica approved shade brand action tessa etertra including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm `(thirty five millimetre) thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.. |
| 28 | Providing wood work in frames of doors , windows , clerestory windows and other frames wrought , framed and fixed in position sal wood including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 29 | Providing and fixing 40mm(forty millimeter) thick 2nd class deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85-G(eighty five) with wire of dia 0.56mm(zero point fifty six millimeter) for doors windows clerestory windows including bright finished /black enameled iron butt hinges with necessary screws including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 30 | Providing and fixing glazing with glass panes of 5.50mm(five point fifty millimetre) thickness (weight not less than 13.75 kg) sqm in aluminium door, window, ventilator shutters make Jindal Indian aluminum Co. and partition etcetera with PVC/neoprens gasket etcetera complete upto any floor level/height as per the architectural drawings including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 31 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.upto floor all level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 32 | Providing and fixing fly proof galvanished MS wire gauge designation 140 G (one hundred forty G) with wire of dia 0.56mm (zero point fifty six millimetre) to windows and clearstory windows including 60 x 20mm (sixty into twenty millimetre) beading upto any floor level/height as per the direction by the Engineer in charge including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 33 | Providing and fixing 25 mm (twenty five millimetre) diameter SS curtain rods and brackets including fixing 25x3mm (twenty five into three millimetre) M.S. flat at 10 cm.(ten centimetre) long and plugs etc. complete in first class deodar wood including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 34 | Providing and fixing 250x16mm (two hundred fifty into sixteen millimetre) anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government |
| 35 | Providing and fixing 300x16mm (three hundred into sixteen millimetre) anodized aluminum sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government |
| 36 | Providing and fixing 200×10mm (two hundred into ten millimetre)anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 37 | Providing and fixing 150×10mm (one hundred fifty into ten millimetre) anodized aluminium tower bolts (barrel type ) anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by the Government. |
| 38 | Providing and fixing 125mm (one hundred twenty five millimeter) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 39 | Providing and fixing 100mm (one hundred millimeter) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 40 | Providing and fixing MS fan light pivots with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 41 | Providing and fixing MS fan light catch with necessary screws etc. complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 42 | Providing and fixing 150mm (one hundred fifty millimetre) bright finished brass door stopper with rubber cushion screw etcetra complete to suit shutter thickness complete including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 43 | Providing and fixing alumnium sheet 1mm (one millimetre) thick in expansion joints vertically fixed with screrws or nails complete including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 44 | Providing and fixing chromium plated brass 50mm (fifty millimetre) thick cupboard or ward robe locks with nuts complete including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 45 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete 40mm (forty millimetre) of approved quality including necessary screws etc.including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 46 | Providing and fixing bright finished brass helical door spring (superior quality) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 47 | Providing and laying Full body double charge matt finished /or glaxy vitrified floor tiles in different sizes or as directed by the Engineer-in-charge upto any floor level height with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement :four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 x10mm (six hundred into six hundred into ten millimetre ) of Kajaria,Nitco/Rak/Johnson/Orient/Somany or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 48 | Providing and laying Vitrified tiles full body double charged in different sizes or as directed by the Engineer-in-charge with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete upto any floor level height Size of Tile 600x600x10 mm(six hundred into six hundred into ten millimetre ) of Kajaria, Nitco/ Rak/ Johnson/ Orient/ Somany or its equivalent including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 49 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 50 | Providing and laying granite stone in flooring 20mm (twenty millimetre) thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 51 | Providing and laying marble work (table rubbed and polished) in flooring 20mm (twenty millimetre) thick base in cement mortar 1:3 (One cement:threesand) including jointing with cement mortar 1:2(one white cement:two marble dust)with an admixure of pigment to match the shade of the marble white makrana marble including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 52 | Providing and laying Kota stone slab flooring 20mm (twenty millimeter) (average) thick base of cement mortor 1:4(one cement:four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm(Twenty five millimeter) thick complete upto any floor level height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 53 | Providing and fixing Steel (Tata/Sail) work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 54 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 55 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete (Ridges plain) (500 - 600mm) including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 56 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete (valley plain ) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 57 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete (Gutter)( Upto 600 mm over all girth) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 58 | Providing and fixing M.S.BP sheet 1.66mm to 2mm (one point sixty six millimeter to two millimeter) thick in eaves board/facia/soffits/ceiling including cutting,fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer-in-charge(Base members of steel work shall be measured & paid separately) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. . |
| 59 | Providing and fixing M.S.tube hand rail Tata or Sail make of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete upto all floor level including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 60 | Providing and fixing 100mm (One hundred millimetre) on wall face PVC (D-plast) rain water pipes of working pressure not less than 4.5 kg/sqm (four point five kilogram per square metre including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 61 | Providing and fixing PVC Plain bend 100mm (One hundred millimetre) dia on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 62 | Providing and fixing M.S holder bat clamps of approved design to C.I or PVC pipes embeded in and including cement concrete blocks 10x10x10 cm(ten into ten into ten centimetre) of 1:2:4(one cement :two sand :four draded stone aggregate 20mm (twenty millimetre) nominal size) and cost of cutting holes and making good the wall etc. 100mm (one hundred millimetre) diametre for C.I. /PVC pipe including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 63 | Providing and fixing in cast iron cover without frame for man holes 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty weight not less than 23kg.(Twenty three kilogramme) including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 64 | 6mm (six millimetre) thick cement plaster to ceiling in all floor level in Cement mortar 1:3(One Cement:three Sand) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 65 | 15mm (fifteen millimetre) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/any height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including curing complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 66 | 20 mm(twenty millimetre ) thick cement plaster in single coat on fair side of brick/ concrete / stone walls for interior plastering in all floor level/any height including arrises , internal rounded angles, chamfers and rounded angles not exceeding 80mm (eighty millimetre ) in girth and finished even and smooth and curing complete in cement mortar 1:4 (one cement four sand )including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 67 | Providing and applying white cement (Birla white/JK) wall putty based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level /any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 68 | Distempering with oil bound washable distemper of approved brand of (Neolac/Assian/Dulux/Berger) Jenson and Nicholson (J&N) Golden Paints Aqualac make and manufacture to give an even shade New work (two or more coats) over and including water thinable priming coat with cement primer complete upto all floor level /any height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 69 | Finishing wall with weather proof exterior grade emulsion of approved design( Apex ultima/heritage ) or its equivalent on undecorated wall surface(two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt,dust, and other foreign matter etc. including sand paper smooth complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 70 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty to required for metling the surface including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 71 | Painting steel work with deluxe multi surface paint system for interiors and exterior using Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 72 | Applying one coat of Acrylic primer( spectrum or equivalent of superior quality) on new concrete/ masonry/ plastered surface after and including preparing the surface by throughly brushing the surface free from mortor dropping and other foreign matter sand papering the surface smooth complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 73 | Providing and laying chequerred precast cement concrete tiles 22mm(twenty two millimtre) thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tilkes, including rubbing and cleaning etc. complete on 20mm(twenty millimetre) thick bed of cement mortor 1:4(one cement:four oarse sand) medium shade pigment using 50% white cement 50% grey cement including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 74 | Providing and laying 60mm (sixty millimetre) thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge cement concrete paver block of M-30 grade with approved colour, design & pattern including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 75 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 35 kg (Thirty five kilogramme) and door width upto 700 mm ( seven hundred millimetre) with necessary accessories and screws etc. complete. including carriage of materials within all leads and lifts and other incidential . The rate including octroi,royality, Malkana, toll tax, sale tax ,or other taxes imposed by the Government. |
| 76 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface IInd course of 20 mm (twenty millimetre) cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC shee tshould be 100 mm (One hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm).with average thickness of 120mm (one hundred twenty millimetre) and minimum thickness at khurra as 65mm (sixty five millimetre)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. . |
| 77 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm(twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty metre) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (three hundred millimetre) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 78 | Providing and laying cement concrete 1:5:10 (one cement:five sand: ten graded stone aggregate 40mm (forty millimeter) nominal size for surround or encasing PVC pipes 100mm (One hundred millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 79 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231 of cera / Hindware /Jaguar with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 80 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a pair of 15 mm (fifteen millimetre)C.P. brass pillar taps of CERA ,HINDWARE/PARRYWARE make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 81 | Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fittings in white shade of Cera Parry ware Hindware Sanitary ware Neycer complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government. |
| 82 | Providing and fixing 32mm (thirty two millimeter) dia PTMT PVC waste pipe (heavy duty make of Kingston, Gem, Parko, Techno , Jal, Jaquor for wash basin or sink in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 83 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of Atul, Modi Guard, Golden Fish make including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 84 | Providing and fixing 600mm x 20mm (six hundred millimeter into twenty millimeter) Towel rail (heavy duty make of kitech IS: 8931 and 8934) complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 85 | Providing and fixing 600mmx120mmx5mm (six hundred into one hundred twenty millieter into five millimetre) glass shelf with CP brass brackets and guard rail fixed to wooden plugs with CP brass screw of Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 86 | Providing and fixing chromium plated brass soap dish make of Kingston, Gem, Parko, Techno , Jal, Jaquor with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 87 | Providing and fixing 15mm ( fifteen millimetre ) nominal size IS: 8931 PTMT bib cock make of Paryag Viking and colour fancy with flange short body in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 88 | Providing and fixing 15mm( fifteen millimetre ) nominal size IS: 8931 PTMT bib cock make of Paryag Viking and colour fancy with flange long body in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 89 | Providing and fixing Single Liver Sink Mixer Swinging Spout ( Wall mounted Model) of Series( FUS 29163) with connecting legs & wall flanges of Cera/ Perry Ware make or its equivlent in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 90 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 or its equivlent in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 91 | Providing and fixing stainless steel kitchen sink AMC,Unik,Diamond, Neelkanth with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but including fitting 510 x 1040 mm (Five hundred ten into one thousand forty millimeter) with bowl depth 250 mm (Two hundred fifty millimeter) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 92 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm (forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/Jaguar Finolex or hindware Make including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 93 | Providing and fixing 15mm (fifteen millimetre) nominal size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete16mm (sixteen millimetre) size Zindal /Tata make including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 94 | Providing and fixing 15mm (fifteen millimetre) nominal bore furrule with C.I mouth cover including boring and taping the main Tata/zindal make including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 95 | Providing and fixing 20mm (twenty millimetre) nominal bore furrule with C.I mouth cover including boring and taping the main Tata/zindal make including entire carriage of material within all leads and lifts and other incidentials.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 96 | Providing and fixing PTMT grating of approved quality and colour make of Kingston, Gem, Parko, Techno , Jal, Jaguar superior quality for floor, gully or nahani trap in all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government |
| 97 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make of Jal, Jaquar,Hindware Make.or its equivalent as approved by Engineer - in - charge including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 98 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement :two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm.(ninety into eighty centimetre) and 45 cm(forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm(four hundred fifty five into six hundredten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg )with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentials as per the dircetion of by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 99 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm(twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm(forty millimetre) nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm(ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm(five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentials as per the dircetion of by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 100 | Providing and fixing 110mm (One hundred ten millimetre) nominal size on wall face unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion single socketed pipes.including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 101 | Providing and fixing 75mm (seventy five millimetre) nominal size on wall face unplasticised Rigid PVC rain water pipes Supreme /finolex /Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion single socketed pipes.including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 102 | Providing and fixing 110mm (one hundred ten millimetre) PVC bend of required degree with access door, insertion rubber washer 3mm (three millimtre) thick bolts and nuts complete Tata/zindal make including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 103 | Providing and fixing 75mm (seventy five millimetre) PVC bend of required degree with access door, insertion rubber washer 3mm (three millimtre) thick bolts and nuts complete Tata/zindal make including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 104 | Providing and fixing PVC floor trap Finolex make of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetera complete 100mmx75mm(one hundred into seventy five millimeter) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. |
| 105 | Providing and fixing 100mm (one hundred millimetre) dia PVC collars ISI marked Finolex make including fixing with approved adhesive etc. Complete including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 106 | Providing and fixing 75mm (seventy five millimetre) dia PVC collars ISI marked Finolex make including fixing with approved adhesive etc. Complete including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.. |
| 107 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A including joiting with seal ring conforming to IS: 5382, leaving 10mm (ten millimetre) gap for thermal expansion of single tee without door 110mm (One hundred ten millimetre) or vectus make ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 108 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type-A including joiting with seal ring conforming to IS: 5382, leaving 10mm (ten millimetre) gap for thermal expansion of single tee without door 75mm (Seventy five millimetre) or vectus make ncluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 109 | Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps including making good the make of B.S.T. Jindal (Hissar) Tata steel Tubes Ltd. Parakash Surya walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Zindal /Tata make: including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 110 | Providing and fixing 20mm (twenty millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall BST Jindal(Hissar) Tata steel tubes ltd. Parakash Surya including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 111 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.1216(16mm OD) Pipe including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 112 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.1620(20mm OD) Pipe including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 113 | Providing and fixing PVC water storage tank of 12701 ISI marked of approved brand and make (Sintex with 5 (Five) layer equipment with 40mm (forty milimeter) nominal bore galvanised mild steel scour tube with fitting, 25mm (twenty five milimeter) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimeter) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height ground level 1000 litres (one thousand) net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government. |
| 114 | Providing and fixing 110mm (One hundred ten millimetre) dia unplasticised -PVC pipe clips of approved design Finolex make to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into ffty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete. including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government |
| 115 | Providing and fixing 75mm (seventy five millimetre) nominal size unplasticised -PVC pipe clips of approved design Finolex make to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into ffty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etc. complete including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. |
| 116 | Providing and fixing CP brass shower rose with 15 to 20mm (Fifteen to twenty millimetre) inlet and 150mm (One hundred fifty millimetre) dia Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. NOTE 1) All Type of material shall be arranged by the contractor vide Notification by Additional Secy.to the Govt. of HP vide letter No.PBW(B)©(17)2/0212 dated 7.8.2018 (2) The rates shall be inclusing of all types of taxes including GST etctra) (3) The bidder are requested to submit their bid as per notification issued by the Principal Secy.PW to the Govt.of HP vide letter No.PBW(B) A(3)1/2020 dated 22.7.2020 & Govt. of HP vide letter No.PBW(B) A(3) 1/2020-1 dated 7.10.2021 Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
