|
| 1 | Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions including removal of debris outside MoD land complete all as specified and as directed. |
| 2 | M&L for brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 3 | All as per BOQ Serial Item No 2 above but except brick etc complete all as pecified and directed. |
| 4 | M&L for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc including removal of debris outside MoD land complete all as specified and as directed. |
| 6 | M&L for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 7 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement)etc including necessary working platform complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 8 | M&L for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceilings and finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Demolation of cement concrete (reinforced) in any position (below or above G.L) etc including removal of debris outside MoD land complete all as specified and directed |
| 10 | M&L for RCC (Nominal Mix) in type-B1 1:2:4 (using 20mm graded stone aggregate) as in beams cantilevers, bressummers, lintels over 1.5m span etc complete all as specifed and directed. |
| 11 | M&L for RCC (Nominal Mix) in type-B1 1:2:4 (20mm graded stone aggregate) as in pre-cast slabs supported on walls for cup board and Kitchen slabs, manhole cover etc complete all as specifed and directed. |
| 12 | M&L for Formwork to sides and soffits of floor or roof beams, beam aunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc also splays between floors and beams, etc with rough surface complete all as specified and as directed. |
| 13 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed. |
| 14 | M&L for TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 15 | Dismantling of plain or corrugated aesbestos sheet any gauge, thickness in roof coverings including removal of debris outside MoD land complete all as specified and directed. |
| 16 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 17 | S&F Pre-painted mangalore pattern galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 18 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.56mm of an colour having tensile strength of Alloy 31000 H4 as in ridges, Valley gutter, drip and straight to flashing (length and, fixed girth as fixed) with self tapping screws complete all as specified and as directed. |
| 19 | Dismentling timber scantling 40 sq cm and over in section, (framed work) in any position complete all as specified and as directed. |
| 20 | S&F steel Steel work of MS Square/round pipe or angles, Tee etc as in purlin, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed. |
| 21 | S&F in repairs Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc with L-type or J-type or cranked hook bolts etc complete all as specified and directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 23 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and similar work conforming Fe-290, Gde E-165 complete all as specified and as directed. |
| 24 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars, barred iron doors, iron gate, ladders; framed balusters, ways : railing : frame work of watertanks and similar work conforming Fe-290, Gde E-165 complete all as specified and as directed. |
| 25 | Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) including removal of debris outside MoD land complete all as specified and as directed. |
| 26 | M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in CM (1:4) for backing coat complete all as specified and directed . |
| 27 | M&L for Double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm as in skirtings, etc. set and jointed in neet cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed . |
| 28 | M&L for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and as directed. |
| 29 | M&L for Non-Skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15 mm thick cement plaster for backing coat in CM (1:6) complete all as specified and as directed. |
| 30 | M&L for Non-skid Ceramic coloured floor tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 31 | M&L for Glazed ceramic tiles of size 450 x 300 x 7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed. |
| 32 | M&L for 20mm thick pre-polished cement concrete designed coloured pavement/Chequered tiles having area of each tile not exc -16 Sqm in size glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 33 | M&L for 16-18mm thick green marble work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 34 | M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. |
| 35 | Rounding to edges of stone slabs one edge, such as in steps, coooking platform and other similar situations complete all as specified and as directed. |
| 36 | M&L for Machine cut kota stone slab flooring 20-25mm thick over & including 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 37 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid with & including 15mm thick rendering in CM 1:4 and jointed with all as per BOQ Serial item No 36 above complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level including removal of debris outside MoD landcomplete all as specified and as directed. |
| 39 | M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed. |
| 40 | M&L for 100mm thick plain Cement concrete type B- 2, (1:2:4) (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as specified and as directed. |
| 41 | M&L for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete all as specified and as directed. |
| 42 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 43 | M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39mm x 24mm x 0.80mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm x 24mm x 0.8 mm thick wall angle 22.2mm x 22.2mm x 0.65 mm thick (thickness comprising of GI/0.35 + PPPCGS/0.3 mm & weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (placed in the grid system duly suspended with 4 mm dia G I bars hangers) fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and as directed. |
| 44 | M&L for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size 25 x 20 x 0.63 mm and wire cloth of 0.71 mm dia of wire and 100 x 50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed. |
| 45 | M&L POP cornice width n.exc 200mm wide in ceiling edge of any design and shape complete all as specified and directed. |
| 46 | S&F in repairs 6 mm thick Gypsum board/calcium silicate board tiles of size 600 x 600 mm incl proper hanging arangement as required complete all as specified and directed. |
| 47 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 48 | All as per BOQ Serial item No 47 above but exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed. |
| 49 | Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 50 | All as per BOQ Serial item No 49 above but exc 2 Sqm each complete all as specified and as directed. |
| 51 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area n exc 1 sqm each, complete all as specified and as directed. |
| 52 | Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm and n exc 2 sqm each, complete all as specified and as directed. |
| 53 | S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and directed. |
| 54 | S&F mild steel flat iron of size 25 x 3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 55 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 56 | S&F 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 57 | S&F Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and as directed. |
| 58 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and as directed. |
| 59 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 60 | S&F factory made solid panel PVC Moulded door shutter 28 to 30 mm thick style with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on front face & 2 mm plain colour PVC sheet on back faces, and with particle board core supplying and fixing in frame at site complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 61 | S&F 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and as directed. |
| 62 | S&F Stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed. |
| 63 | S&F 125mm long aluminium anodised extruded handles fabricated type, complete all as specified and as directed. |
| 64 | S&F aluminum anodised barrel tower bolt of extruded section 150 mm size complete all as specified and as directed. |
| 65 | S&F Aluminium anodized barrel tower bolts, extruded section 200mm long complete all as specified and as directed. |
| 66 | S&F for aluminium sliding door bolt 300mmlong, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed. |
| 67 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete all as specified and as directed. |
| 68 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 69 | Hacking out old broken glass of any thickness, sizes quality on description from metal frames includng punching or drilling out old glazing pins/spring clips including removal of debris outside MoD land complete all as specified and as directed. |
| 70 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and as directed. |
| 71 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 72 | S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and as directed. |
| 73 | S&F in repairs power coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete incl aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fittingand all necessary fittinngs complete all as specified and as directed. |
| 74 | S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mm x 25mm x 1.55mm and shutter of section 20mm x 20mm x 1.55mm incl (two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with all fittings complete all as per manufacturer's instructions complete all as specified and as directed. |
| 75 | S&F in repairs power coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings, 4.8mm Glass and partical board as required complete all as specified and as directed. |
| 76 | S&F in repairs 4.8 mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified and as directed. |
| 77 | S&F in repairs steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 78 | All as per BOQ Serial item No 77 above but without glazing bars complete all as specified and as directed. |
| 79 | S&F curtain rod of decorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified and as directed. |
| 80 | S&F in repairs 20/25mm fancy type bracket for drapery rods anodized aluminium alloy complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 81 | S&F in repairs floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and as directed. |
| 82 | Taking down 15 mm dia old steel water tubing and connections in any position complete all as specified and as directed. |
| 83 | Taking down 20 mm dia old steel water tubing and connections in any position complete all as specified and as directed. |
| 84 | Taking down 40 & 50 mm dia old steel water tubing and connections in any position complete all as specified and as directed. |
| 85 | Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 86 | Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 87 | S&F galvanized steel tubing medium grade, 50 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 88 | M&L for Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and as directed. |
| 89 | S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts including PVC seat cover and making all necessary connections including removal of debris outside MoD land complete all as specified and as directed. |
| 90 | S&F in repairs vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest including P or S trap complete including cement concrete(excl flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc including removal of debris outside MoD land complete all as specified and as directed. |
| 91 | S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe including removal of debris outside MoD land complete all as specified and as directed. |
| 92 | S&F in repairs Vitreous China wash basin (white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, including removal of debris outside MoD land complete all as specified and as directed. |
| 93 | S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, boul size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, including removal of debris outside MoD land complete all as specified and as directed. |
| 94 | S&F in repairs Vitreous China wash basin (coloured), oval size for counter top, excluding taps, waste,chain and plug and porcelain stopper but including brackets, including removal of debris outside MoD land complete all as specified and as directed. |
| 95 | S&F in repairs 15mm bore Brass CP bib cock fancy type long body with crutch or butterfly handle complete all as specified and as directed. |
| 96 | S&F in repairs 15mm bore Brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and as directed. |
| 97 | S&F in repairs 15mm bore Brass CP angular stopcock type with crutch or butterfly handle complete all as specified and as directed . |
| 98 | S&F in repairs PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and as directed. |
| 99 | S&F in repairs brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and as directed. |
| 100 | S&F in repairs 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 101 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood, fancy boarder all around glass and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 102 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed. |
| 103 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 104 | S&F in repairs brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed. |
| 105 | S&F in repairs brass CP health faucet with chromium plated brass screws etc complete all as specified and as directed. |
| 106 | Preparation of newly plaster surfaces of wall and M&L for applying two coats of oil bound distemper etc complete all as specified and directed. |
| 107 | M&L for one coat of plastic paint over old texture sruface to match existing design and pattern as approved complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 108 | Preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old distemper and painted surface and M&L for applying one coat of oil bound distemper etc complete all as specificed and directed. |
| 109 | Preparation of newly plaster surfaces of ceiling surface and M&L for applying three coats white wash on walls complete all as specified and directed. |
| 110 | Preparation of old surfaces of ceiling and M&L for applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 111 | Preparation of newly plaster surfaces of wall and M&L for applying two coats Exterior Acrylic Emulsion paint on external surface incl nescessary scafolding complete all as specified and directed. |
| 112 | Preparation on new plastered surfaces of wall and M&L for applying two coats of cement base paint complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 113 | Preparation of old surfaces of wall and M&L for applying one coat Exterior Acrylic Emulsion paint on external surface incl nescessary scafolding complete all as specified and directed. |
| 114 | S&F 2mm thick wall care putty on wall/ceiling complete all as specified and as directed. |
| 115 | Preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and M&L for applying One coat of cement base paint complete all as specified and as directed. |
| 116 | M&L for applying two coats of synthetic enamel paint to wooden surfaces (frame & shutter) over & including a coat of primer incl preparation of wooden surface of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 117 | Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. |
| 118 | M&L for two coats of synthetic enamel paint to steel surfaces (frame & shutter) over & including a coat of red oxide primer incl preparation of steel surface of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed. |
| 119 | Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and M&L for applying one coat of synthetic enamel paint etc complete all as specified and as directed. |
| 120 | M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed. |
| 121 | S&F in repairs 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed. |
| 122 | M&L for Oiling/ greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and as directed. |
| 123 | S&F lock plate bracket made of angle 40X40X5 mm, flat 25X6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer incl taking down old lock plate complete all as specified and as directed. |
| 124 | S&F mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and as directed. |
| 125 | S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brasshandles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc complete all as specified and as directed. |
| 126 | S&F rotational moulded poly-ethylene water storage tanks of 500 ltr capacity, (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and as directed. |
| 127 | S&F rotational moulded poly-ethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and as directed. |
| 128 | S&F rotational moulded poly-ethylene water storage tanks of 2000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing water tank and remove from site complete all as specified and as directed. |
| 129 | S&F 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 130 | S&F in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 131 | S&F in repairs 25mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 132 | S&F 50mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 133 | S&F in repairs 50mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 134 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed 20 mm dia complete all as specified and directed. |
| 135 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed 25 mm dia complete all as specified and directed. |
| 136 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwd both end for iron pipe and fixed 50 mm dia complete all as specified and directed. |
| 137 | S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm with interval of 500mm in both horizonatal and vertical directions including necessary caping/beading/fillets at top and junctions or any other locations required as per site etc complete all as per specified and directed. |
| 138 | S&F in repairs PVC caping/fillets at top and junctions required as per site condition PVC panelling etc complete all as per specified and directed. |
| 139 | Dismantling and removing all unsound/weak concrete materials from slabs, lintel, chajja, fin, facia etc. by any means as directed including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials, loose concrete/aggregate etc including removal of debris outside MoD land for 25mm average thickness complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 140 | Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and M&L for applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface (Make: SIKA/FOSROC or equivalent as approved by GE) upto 12 mm dia bar complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 10 storey. |
| 141 | Prepration of exiting reinforcement surface by brush and M&L for application of two coats of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight minimum adhesive bond strength with steel is 1.5N/mm2 complete all as specified and directed. Make: SIKA/FOSROC or equivalent as approved by GE |
| 142 | M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 10 storey. |
| 143 | M&L for TMT bars up to 12mm dia for structural connections in RCC Bram, Lintels, Columns and slabs uncluding power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 10 storey. |
| 144 | Supply, mixing for providing and applying of two component structural grade polymer modified reinstatement morter, up to the thickness of 15mm over a coat of epoxy resin boanding agent as per manufacturer instruction . where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 upto 25 mm average thickness complete all as specified and as directed.Make :- Sika/Fosroc or equivalent as approved by GE NOTE:- (i) Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions) (ii) Work shall be carried out in bldgs with height upto 10 storey. |
| 145 | M&L for supply, mixing and placement of micro concrete cement based prepacked single component chloride free sulphate free, non-shrink, free flow etc compacting, ready to use after mixing water in specified portion and in required thickness as per manufacturer instruction including necessary form work, compressive strength (ASTM C 109,cm cube ) of 35 MPa at 28 days including application curing compound at various location in bldg complete all as specified and as directed. |
| 146 | M&L for applying high efficiency polymeric resin base film forming curring compound or equivalent, Over concrete surface with max coverage area 5.0 sqm per liter as per manufactures instructions, complete all as specified and as directed.Note: Work shall be carried out in bldgs with height upto 10 storey. Please Enable Macros to View BoQ information |
