|
| 1 | Demolition of brick work or stone /boulder masonry built in cement mortar or cement lime mortar including removing demolished materials/debris outside MoD land complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in c.m 1:4 complete all as specified and directed. |
| 4 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. including removing demolished materials/debris outside MoD land complete all as specified and as directed. |
| 5 | M&L for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L for 5mm thick rendering in cement mortar (1:3) on concrete surface as in ceilings and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 10 Storey. |
| 8 | Preparation of new plastered surfaces of ceilings and M&L for applying three coats of white wash on ceiling surface etc complete all as specified and as directed. |
| 9 | M&L for 1 mm thick wall care putty on walls and ceilings surfaces as required (in two layers) complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 10 | Preparation of new plastered surfaces of wall and M&L for applying two coats of oil bound distemper over & including a coat of primer complete all as specified and directed.Note: Work shall be done in bldgs with height upto 12 storey |
| 11 | Preparation of old treated surfaces of wall by brooming down or steel wire brushing and M&L for applying one coat of white wash complete all as specified and directed. |
| 12 | All as per BOQ Serial item No 11 above but on ceilings complete all as specified and directed. |
| 13 | Preparation of old plastered surfaces and M&L for applying two coats of white wash on walls complete all as specified and as directed. |
| 14 | Preparation of old plastered surfaces and M&L for applying one coat of acrylic washable distemper on walls complete all as specified and as directed. |
| 15 | Preparation of old plastered surfaces wall and M&L for applying two coats of acrylic washable distemper over & including a coat of chalk whiting primer including 1mm thick cement based wall care putty complete all as specified and as directed. |
| 16 | Preparation of old wooden surfaces of any description over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 17 | Preparation of old painted steel surfaces of any description over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 18 | S&F in repairs Pre painted galvalume aluminium zinc coating GI based partially/ fully corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) including removing demolished materials/debris outside MoD land complete all as specified and directed. |
| 20 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including Screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 21 | M&L for colour printed glazed ceramic tiles (Premium quality) size not less than 450mm x 300mm x 7mm thick as in walls set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick cement plaster in CM (1 : 4) complete all as specified and as directed. |
| 22 | M&L for double charged vitrified light shade tiles (Premium Quality) of size not less than 600mm x 600mm x 10mm thick in floor, etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed bed in CM (1:6 ) for laying of floor finishes complete all as specified and as directed. |
| 23 | All as per BOQ Serial item No 22 above but fixed on vertical surface as in skirtings with & including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 24 | Demolition of stone slab or tiles of any description or thickness in floors or aprons etc (laid, bedded and pointed in any mortar) complete all as specified and as directed. |
| 25 | M&L for Marble green work 18 to 20mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 26 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 27 | Rounding to edges of stone slabs one edge, such as in steps, coooking platform and other similar situations complete all as specified and directed. |
| 28 | Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all as specified and directed. |
| 29 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; walk ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165 complete all as specified and directed. |
| 30 | Taking down steel window/ventilator including guard bar of any description and in any position and removing from site complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 31 | Taking down chowkhat or frames with shutter area not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 32 | Taking down chowkat or frames with shutter area exc. 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 33 | Taking down wooden shutters of any description area exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 34 | Hacking out old/broken glass (any description, size and quality) including removing demolished materials/debris outside MoD land complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 35 | S&F mild steel flat iron of size 25 x 3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 36 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in hold fast, bed plates, copings etc. including necessary formwork complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 37 | S&F 2nd Class Hard Wood, Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 38 | S&F 30mm thick factory made flush door shutters solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 39 | S&F 35mm thick 2nd class hard wood, gauged & skelton shutter, open rebated & prepared to receiv e gauged, (without sase bar) edges of framing plain, chamford or rounded, fitted with cut & mitred beads for securing gauged etc complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 40 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in openingcomplete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 41 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match, reinforced with MS Sq tube in opening complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 42 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 43 | S&F factory made solid PVC Moulded door shutter 28 to 30 mm thick(stiles) with 2 mm thick prelaminated Moulded PVC sheet polyurethane painted on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 44 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded for receiving glass and including cutting holes in wall for fixing the window and making good the disturbed surfaces with the existing finishes to match complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 45 | All as per BOQ Serial item no 44 above but without glazing bar complete all as specified and directed. |
| 46 | S&F steel ventilators with tope hung shutters including hinges with steel handle and steel peg stay,Glazing bar dovetailed or welded for receiving glass and including cutting holes in wall for fixing the ventilator and making good the disturbed surfaces with the existing finishes to match complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 47 | S&F Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips, locking arrangement etc and aluminium frame of size 80mm x 25mm x 1.55mm and shutter of section 20mm x 20mm x 1.55mm incl (two shutter) of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings all as per manufacturer's instructions complete all as specified and directed. |
| 48 | S&F in repairs aluminium anodised Partition wall of frame size 80mm x 38mm x 3.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings all as per manufacturer's instructions complete all as specified and directed. |
| 49 | S&F in repairs powder coated aluminum ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper,aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx50mmx1.50mm and shutter frame shall be 40mmx20mmx1.50mm ccomplete all as specified and directed.Note: (i) Note: Work shall be carried out in bldgs with height upto 12 Storey.(ii)1 No Glazed shutter and 1 No Gauged shutter constitube one unit. |
| 50 | S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 51 | S&F in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 52 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 53 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exe 0.50 Sqm in each pane complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 54 | S&F 4mm thick figured glass, ordinary quality and glazing with oil putty in square n .exe 0.50 Sqm in each pane complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 55 | S&F in repairs 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work as in kitchen cabinet shutter including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 56 | S&F in repairs 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cupboard shutter including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed. |
| 57 | S&F 0.9mm thickess of decorative laminated type 1 of surfaces finish, colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and directed. |
| 58 | S&F in repairs 2nd class hard wood Plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 Sqcm & n exc 6.00 Sqcm complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 59 | S&F in repairs 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 60 | S&F in repairs 6mm thick plywood in cupboards complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 61 | S&Fcurtain rods dicorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified and directed. |
| 62 | S&F in repairs 20/25mm fancy type bracket for drapery rods anodized aluminium alloy complete all as specified. Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 63 | S&F in repairs floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, overall length cover plate 150mm complete all as specified and directed. |
| 64 | S&F 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed. |
| 65 | S&F 100mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed |
| 66 | S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 67 | S&F 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed. |
| 68 | S&F 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and as directed. |
| 69 | S&F in magnetic catches 50 mm long of any description complete all as specified and directed. |
| 70 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 71 | S&F 250mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 72 | S&F 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and as directed. |
| 73 | S&F 75mm Hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 74 | S&F 150mm long Aluminium,anodised extruded handle fabricated type, complete all as specified and as directed |
| 75 | S&F in repairs 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 drip and straight flashing complete all as specified and as directed. |
| 76 | S&F in repairs 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed. |
| 77 | M&L for Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and as directed. |
| 78 | S&F lock plate bracket made of angle 40 x 40 x 5 mm, flat 25 x 6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer incl taking down old lock plate complete all as specified and directed. |
| 79 | S&F in repairs mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and directed. |
| 80 | S&F in repairs mortice lock set combipack with 6 lever and with decor brass handle set complete all as specified and as directed. |
| 81 | S&F in repairs aluminum (extruded section Body) body door closer hydraulically regulated design No 3( Make Hyper) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 82 | Preparation of new wooden surfaces of any description over 10 cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and as directed. |
| 83 | Preparation of new steel surfaces of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 84 | Resecuring or easening, adjusting without taking down of shutters exc 1 Sqm and n.exc 2 Sqm each in situ complete all as specified and directed. |
| 85 | Dismantiling brick work built in CM for making AC opening in existing wall incl making good the adjacent area with cement and distemper etc including second class hard wood frame 50x40mm Appx area 0.5sqm each) complete all as s including removing demolished materials/debris outside MoD land specified and directed. |
| 86 | M&L for easing adjusting of steel window and oiling greasing for smooth functioning including replacement of unserviceable peg stay, handle and nessessary welding for broken hook or glazing bar complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 87 | M&L for easing adjusting of aluminum window and refitting of shutter section with screw including replacement of unserviceable locking arrengment ,stay hook and nessessary neoprene beading complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 88 | S&F stay/ handle cleat as per requirement at site and welded complete for fixing of handle /stay in steel windows including taking down old one complete all as specified and as directed. |
| 89 | Taking down wooden shutters of any description area exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing the same in the same opening complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 90 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 91 | Taking up or down 20mm steel tubing and connections complete all as specified and directed. |
| 92 | Taking up or down 25mm steel tubing and connections complete all as specified and directed. |
| 93 | M&L for cutting chases, pinning, in making good to facing where required of of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces complete all as specified and directed. |
| 94 | Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 95 | Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 96 | Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed |
| 97 | S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed. |
| 98 | S&F in repairs 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 99 | Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and as directed. |
| 100 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc. (measured overall as fixed along the centre line over fittings and accessories) including removing demolished materials/debris outside MoD land complete all as specified and directed. |
| 101 | S&F CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed.. |
| 102 | S&F CI bend with door of 100mm bore complete all as specified and as directed. |
| 103 | S&F CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and as directed. |
| 104 | S&F CI 'T' of 100mm bore complete all as specified and as directed. |
| 105 | S&F CI cowl of 100mm bore complete all as specified and as directed. |
| 106 | S&F 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 107 | S&F 110mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed. |
| 108 | S&F 110 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed. |
| 109 | S&F 75mm bore PVC (SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 110 | S&F 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed. |
| 111 | S&F 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and as directed. |
| 112 | S&F in repairs 15mm bore GI short piece pluging and screwing to fittings complete all as specified and directed. |
| 113 | S&F in repairs 20mm bore GI short piece pluging and screwing to fittings complete all as specified and directed. |
| 114 | S&F in repairs ball valve including nessesary fittings fixed to existing flushing cistern complete all as specified and as directed. |
| 115 | S&F in repairs wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete all as specified and directed. |
| 116 | S&F in repairs wash hand basin mixture, 15mm bore dia, fancy type brass chromium plated for mixing 'Hot' and 'Cold' water including three joints, screwed both ends for iron pipe or for unions and pluging complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 117 | S&F in repairs spindle for 15 mm bore bib cock / stop cock/pillar tap complete all as specified and as directed. |
| 118 | S&F in repairs brass CP knob for 15mm dia bib cock/pillar cock concealed stop cock complete all as specified and as directed. |
| 119 | S&F in repairs 15mm dia PVC connection pipe 600mm long with PTMT nuts complete all as specified and as directed. |
| 120 | S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 121 | S&F in repairs 32 mm dia PVC flush pipe of polyethylene of low or high density for low level cistern/kitchen sink/WHB complete all as specified and as directed. |
| 122 | S&F in repairs chromium plated peg set of 6 with screws complete all as specified and as directed. |
| 123 | S&F in repairs Chromium Plated towel ring square with round flange complete all as specified and as directed. |
| 124 | Taking down serviceable WHB /kitchen sink and refixing the same after replacing CI brackets with new ones (02 Nos) on wall and making good the surfaces as per existing complete all as specified and as directed. |
| 125 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 126 | S&F in repairs Stainless steel kitchen rack / plate rack of size 31\\" x 36\\" x 10\\" made of stainless steel sheet 0.63 mm thick etc complete all as specified and as directed. |
| 127 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and including 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms) complete all as specified and directed. |
| 128 | S&F in repairs kitchen sink made of stainless steel with plugs, washers and 38 mm dia and CP wate coupling wastes pipe including fixing cantilever brackets and connection to pipe overall size 480mm x 405mm, bowl size 408mm x 350mm x 180mm or equivalent size complete all as specified and directed. |
| 129 | S&F in repairs chromium plated soap dish holder complete all as specified and directed. |
| 130 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed. |
| 131 | S&F in repairs chromium plated toilet paper holder complete all as specified and directed. |
| 132 | S&F in repairs Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 300mm long complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 4 Storey. |
| 133 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 4 Storey. |
| 134 | S&F in repairs PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and directed. |
| 135 | S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.Note: Work shall be done in bldgs with height upto 12 storey |
| 136 | S&F in repairs replacement wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed. |
| 137 | S&F in repairs vitreous china squatting pan of orissa pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 138 | S&F in repairs 15mm bore Brass CP bib cock fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pip or for brass ferrule complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 139 | S&F in repairs concealed 15 mm bore CP stop cock with sliding flange 15 mm complete all as specified and directed. |
| 140 | S&F in repairs pillar taps made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and directed. |
| 141 | S&F in repairs brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 142 | S&F in repairs angular stop cock made of brass chromium plated screwed both ends for iron pipe for 15mm bore complete all as specified and directed. |
| 143 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 144 | S&F in repairs cast iron floor traps with steel grating jointing to waste pipe fixed in cement concrete TypeB1 1:2:4, 100 mm dia complete all as specified and directed. |
| 145 | Removing of blockage from WC's traps/floor trap/gully trap etc inside the building at any floor including cleaning and flushing the pipe up to first man hole complete all as specified and as directed. |
| 146 | Demolition of cement concrete (unreinforced) of any descriptions, below or above Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level including removing demolished materials/debris outside MoD land complete all as specified and as directed. |
| 147 | M&L for 75mm thick PCC (1:3:6), type C2 using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete as specified and directed. |
| 148 | Preparation on new plastered surfaces of wall and M&L for applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over & including a coat of primer complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 10 Storey. |
| 149 | Preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, etc and M&L for applying one coat of anti-algae and anti-fungal exterior grade weather coat paint complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 150 | Complete removal of existing treatment of wall surfaces and M&L for applying multi/single colour texture with plastic paint to match existing design and pattern complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. |
| 151 | M&L for one coat of plastic paint over old texture surface to match existing design and pattern complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 Storey. Please Enable Macros to View BoQ information |
