|
| 1 | Demolition of Concrete of any description (unreinforced) and in any position, complete all as specified and directed. |
| 2 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope, and finishing the surfaces even & smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure : (a) Laying 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof Complete (b) Applying first coat fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 Mpa and shall have reack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree celsius with 3.3% dilution as priming coat (c) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 4.5 gm/ Sqm and pasting it properly with overlap of 50mm and allow it to dry (d) Applying second coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge (e) Applying third and final coat undiluted @ 0.45 ltr/ sqm as directed by Engr-in-Charge. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster). |
| 4 | M&L for 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of cruded oil by weight of cement including dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 5 | Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 6 | M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed. |
| 7 | All as per description of serial item No. 06 here-in-above but except bricks complete all as specified and directed |
| 8 | M&L for 50mm thick PCC, type C-1, 1:3:6, ( using 20mm graded crushed stone aggregate) as in plinth protection finishing the surface complete all as specified and directed. |
| 9 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) not exceeding 1.50 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed. |
| 10 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 Sqm and n.exc 4 Sqm each including taking out hold fast embedded in PCC complete all as specified and directed. |
| 11 | Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each complete all as specified and directed. |
| 12 | S&F in repairs 25 mm dia stainless steel curtain rod design/shape approved by Engr-in-charge complete all as specified and directed. . |
| 13 | S&F in repair MS bracket (turned, weathered and mitered) brackets of with cut, hole suitable for 25mm dia rod fixed with screws and gutties in wall complete all as specified & directed. |
| 14 | All as per serial item No. 13 here-in-before, but end caps with wall ornament and fixed to curtain rod with screws of design/shape all as specified and directed . |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 16 | S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardant, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, hinges, hydraulic stopper, beading etc. as per direction of Engineer-in-charge. |
| 17 | S & F Continuous (Piano) type hinges mild steel bright finish or electro galvanized with wide of flaps 30mm complete all as specified and directed. |
| 18 | S&F hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete, |
| 19 | M&L for Preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 20 | M&L for Preparation of new steel surfaces of any description exc 10cm width or girth priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L for Preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | M&L for Preparing wood or wood based new or untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 23 | Providing & fixing 12mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tmm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge, including Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets complete all as specified and as directed. |
| 24 | S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings including taking down of old PVC wall lining, preparation of surface, complete all as specified and directed. |
| 25 | S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing including taking down of old PVC sheet fillets, complete all as specified and directed. |
| 26 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life. |
| 27 | S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 28 | S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed. |
| 29 | S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 125mmx60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-1 back of chowkhats complete all as specified and directed. |
| 30 | S&F steel window/ventilator with tubular frame factory made double shutters of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 31 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed. |
| 32 | S&F 35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc. with sash bars edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc. sizes of members as per clause 8.24(a) of SSR Part-I complete all as specified and directed. |
| 33 | S&F in repair 300mm ordinary rat rail, rod pattern mild steel springs ISI marked including roller and roller plate complete including all necessary welding if required complete all as specified and directed. |
| 34 | S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked complete all as specified and directed. |
| 35 | S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked complete all as specified and directed. |
| 36 | S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel, complete all as specified and directed. |
| 37 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 38 | S&F in repair aluminium body door closer hydraulically regulated designation No 3 universal type of dia cast body, suitable for door shutter for taking weight up to 80kg complete all as specified and directed. |
| 39 | S&F floor door stopper of overall length of cover plate 140mm or 150mm aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 41 | S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed. |
| 42 | S&F galvanized mild steel wire cloths 0.46mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or galvanized wire staples complete all as specified and directed. |
| 43 | S &F 5.5mm thick selected quality tinted sheet glass including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. in aluminum partition / doors / windows / ventilators etc. complete all as specified and directed. |
| 44 | S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with Powder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm), complete all as specified and directed. |
| 45 | S & F Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. |
| 46 | S & F for powder coated Anodised aluminium window and ventilator shutters, side hung type without or with sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type 100mm long (2 no.) suitable handle (1 no.) include powder coating of any colour (Thickness or powder coating not less than 50 micron), complete all as specified and directed. |
| 47 | S&F 3 ways sliding anodized aluminium glazed window shutter with frame & with following specifications all as specified & directed:-(a) window frame 3 track of size 95mmx25mmx1.5mm thick(b) Stiles and rails of size 35mmx25mmx1.5mm(c) 35mmx35mmx1.5mm T section mullion(d) PVC gasket with 4mm thick tinted glass, incl aluminium handles with necessary locking arrangement for 02 Nos glazed shutter.(e) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples incl aluminium handles with necessary locking arrangement for 01 Nos gauzed shutter.Note:- Measurement to be taken as overall width and height of window. No shutter or frame to be measured separately. All necessary accessories including tinted glass and stainless steel wire cloth required for assembling and fixing window at proper place complete are deemed to be inclusive. |
| 48 | S & F Anodised designer grill of 7mm dia fixed with and including flat section of size 50x1.5mm fixed to aluminium window complete all as specified and directed. |
| 49 | S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal in back in cement; fixing automatic cistern with brackets, flush pipe, grating and union for discharge pipe, complete all as specified and directed. |
| 50 | S&F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat cover white colour or in matching colour with closet closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed. |
| 51 | S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 110mm bore PVC 'P' or 'S' trap complete incl making good to floor complete all as specifed and directed. |
| 52 | S&F in repair Vitreous China wash down water closet pan and trap with flushing cistern, (pedestal pattern in one piece) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete including making good to floor, complete all as specified and directed. |
| 53 | S&F in repair vitreous china wash hand basin (flat back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets complete all as specified and directed. |
| 54 | S&F in repairs 10 liters PVC low level flushing cistern( white colour) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling and fixed complete all as specified and directed. |
| 55 | S&F in repairs brass chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 56 | S&F in repair of CP health faucet with ABS body, 1.25 mtr long flexible tube & hook fixed with and incl CP screws complete all as specified and directed. |
| 57 | S&F in repair plastic water closet seat cover, back closed pattern with flat bottom, and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 58 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 59 | S&F grating round 125mm size of PTMT (minimum weight 50gms) as in repair, complete all as specified and directed. |
| 60 | S&F in repair 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 61 | S&F in repair bib taps, long body fancy type, chromium plated, cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15mm bore, complete all as specified and directed. |
| 62 | S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 63 | Supplied and fixed in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed |
| 64 | S&F in repair Brass chromium plated, wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 65 | Supplied and fixed in repair stop valves (ISI marked), 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup(concealed type) screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe, complete all as specified and directed. |
| 66 | S&F in repairs 15mm bore Angle valve, cast copper alloy fancy type chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed. |
| 67 | S&F in repairs 15mm bore stop valve, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe complete all as specified and directed. |
| 68 | S&F in repair Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed. |
| 69 | S&F in repair towel ring of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( min wt. 90 gms) complete all as specified and directed. |
| 70 | S&F in repair mild steel, chromium plated Soap Dish fixed with and incl CP screws all as specified and directed. |
| 71 | S&F 5.5mm thick glass shelf 12cm wide with cp bracket guard and 60cm long CP railing including chromium plated brass screws and wooden/plastic cleats as in repair, complete all as specified and directed. |
| 72 | S&F beveled edge fancy mirror 5.5mm thick glass of size 600x450mm of selected quality with four holes and catch nut complete design/shape will be approved by Engineer-in-Charge complete all as specified and directed. |
| 73 | S & F in repair for peg set of 5 Pin Stainless steel Grade, AISI 304, fancy type, superior quality with fixing arrangement complete all as specified & directed. |
| 74 | Supplied and fixed in repair PVC tank lid/cover for water storage tank of 500/1000 liters capacity with fixing arrangement complete all as specified and directed. |
| 75 | S&F Rotational moulded polyethylene water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing from site complete all as specified and directed. |
| 76 | S&F Rotational moulded polyethylene water storage tank three layered(cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethylene float and fly nuts including dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing from site complete all as specified and directed. |
| 77 | Supply & Fixing in repair Stainless steel Plate rack 1mm thick of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc. complete all as specified and directed. |
| 78 | S&F in repair Cabinet Mirror of size 400mmx500mmx6mm thick with frame as per Cat Part No.554 of Prayag or techno commercial equivalent complete all as specified and directed. |
| 79 | S&F GI tube 20mm bore medium grade galvanized with all fitting and fixed to short length including taking up or down GI pipes 20mm bore and connection including removal un-serviceable pipe complete all as specified and directed. |
| 80 | S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings complete on walls including taking up or down GI pipe 15mm bore and connections, including removal unserviceable pipe complete all as specified and directed. |
| 81 | M&L for cutting chases, pinning in brick work for concealed water tubing and making good to facings where required and pointed in cement mortar 1:3 cutting not exceeding 10cm girth, complete all as specified and directed. |
| 82 | M&L for providing glazed ceramic coloured wall tiles of size 450mmx300mmx7mm thick, set, jointed in colour cement to match laid over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 83 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 84 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of floor tiling incl cement mortar bedding (but not backing) removing serviceable tiles to a store and rubbish off premises complete all as specified and directed. |
| 85 | M&L for vitrified ceramic tiles, light shade 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of floor tiling incl cement mortar bedding (but not backing)removing serviceable tiles to a store and rubbish off premises, complete all as specified and directed. |
| 86 | M&L for Providing precast cement concrete 1:2:4 type B-0 using 12.5mm graded aggregates louvres and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4.complete all as specified and directed. |
| 87 | Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water complete all as specified and directed. |
| 88 | M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed. |
| 89 | M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement including scaffolding at any height, complete all as specified and directed |
| 90 | M&L for rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas with drip course, ceiling and roof projection at any height making the line in true shape finished even & smooth without using extra cement including scaffolding at any height complete all as specified and directed. |
| 91 | M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of old/new plastered surfaces of wall by using wall care putty of avg 1 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/concrete walls finish to even and smooth with two layers of screylie wall care putty, complete all as specified and directed. |
| 92 | M&L for applying two coats of oil bound distemper over one coat of primer as on walls surfaces complete all as specified and directed |
| 93 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of oil bound distemper on wall, complete all as specified and directed. |
| 94 | M&L for preparation of New plastered surfaces of wall including scaffolding up to 7m height, two coats of cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces and curing after applying each coat, complete all as specified and directed. |
| 95 | M&L for preparation of old plastered or unplastered surfaces of wall including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & greasy spots etc. and applying two coats of cement base paint on wall including curing after applying each coat, complete all as specified and directed. |
| 96 | M&L for preparation of new plastered surfaces of ceiling including cornices plasters and applying one coat of oil bound distemper on ceiling, complete all as specified and directed. |
| 97 | M&L for preparation of old plastered surfaces of ceiling including cornices plasters and applying one coat of oil bound distemper on ceiling, complete all as specified and directed. |
| 98 | M&L for preparation of old surfaces of wall, roof projection/window chajjas and similar surfaces and applying one coat of exterior emulsion paint complete all as specified and directed. |
| 99 | M&L for two coats of white wash on old/new plastered surface, as in ceiling including preparation of surfaces, complete all as specified and directed. |
| 100 | M&L for two coats of white wash on old/new plastered surface, as in wall including preparation of surfaces, complete all as specified and directed. |
| 101 | S&F in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 102 | S&F in repair 32mm bore corrugated PVC waste pipe 60 cm long, complete all as specified and directed. |
| 103 | S&F in repair sinks coupling of required size 50/65/75/100 mm approved by Engr-in-charge complete all as specified and directed. |
| 104 | Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed. |
| 105 | M&L for 75mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in sub base/ floor complete all as specified and directed |
| 106 | S&F machine pressed precast concrete interlocking paver blocks with grey cement and no pigment, any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed. |
| 107 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 108 | M&L for Chequered cement concrete coloured tiles 300mm x 300 mm x 25 mm thick set and jointed, pointed in neat cement slurry with grey cement and pigment as in floor, Screed bed or bedding layer of 20 mm thick CM (1:6) as in floor, complete all as specified and directed. |
| 109 | M&L for machine cut Kota stone, stone slab flooring 20-25mm thick over screed bed 20mm thick in cement mortar 1:4 set, jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including, rubbing and granite polishing, complete all as specified and directed. |
| 110 | All as per serial item No. 109 here-in-above but in vertical surface/ skirting complete all as spd and directed. |
| 111 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.Note:- The rate included for making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded. |
| 112 | M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface/tiles complete all as specified and directed. |
| 113 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed |
| 114 | Rounding to edges of stone slabs, one edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed. |
| 115 | Dismantling/taking down of cast iron or unreinforced concrete or PVC soil waste and drain pipe 75mm or 100mm dia with all fittings complete all as specified and directed. |
| 116 | S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 117 | S&F of 110mm bore pipes, PVC (SWR) bends any radius for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 118 | S&F of 110mm bore pipes, PVC (SWR) junction single (single T) equal or unequal for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 119 | S&F, 75mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficient number of Iron stack clamp complete all as specified and directed. |
| 120 | S&F of 75mm bore pipes, PVC (SWR) bends any radius fitting for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 121 | S&F of 75mm bore pipes, PVC (SWR) junction single (single T) equal or unequal for PVC (SWR) pipes as in repair complete all as specified and directed. |
| 122 | S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed. |
| 123 | Dismantling wrought iron or mild steel work of any description, complete all as specified and directed. |
| 124 | M&L for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240, complete all as specified and directed. |
| 125 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and directed. |
| 126 | S&F Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed. |
| 127 | S&F pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws, complete all as specified and directed. |
| 128 | M&L for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregates aggregate, as in sunken floors and mass concrete including providing necessary slope/ camber as directed and duct for drain of water (pipe for spout will be measured and paid separately) complete all as specified and directed. |
| 129 | M&L for (a) 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compound as approved as per manufacturer’s instructions shall be applied both on floor and wall. The surfaces then shall be cured and allowed to dry. All the joints of pipe shall be sealed properly.(b) Apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane Based Liquid Membrane on floor as well as on wall as per manufacturer’s instructions of make/manufacturers as specified.(c) Manufacturer/approved agencies for water proofing treatment to sunken slab/portion membrane shall be as per approved list (Note:-The Rate included for WPC ) |
| 130 | M&L for 50 mm bore ‘medium grade’ galvanized pipe as in spout including necessary cutting to wall/beam etc. and proper setting in cement mortar 1:3, complete all as specified and directed. |
| 131 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed |
| 132 | M&L for RCC 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, kitchen platform, WHB platform, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed. |
| 133 | M&L for form work to sides and soffits of slab, beams, columns, shelves etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 134 | M&L for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 135 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. Please Enable Macros to View BoQ information |
