|
| 1 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of existing sheet, complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheet, complete all as specified and as directed. |
| 3 | S&F galvanised,corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screw and washers in roofs, walls etc including dismantling of existing sheet ,complete all as specified and directed. |
| 4 | All as per Ser Item No above but except sheeting, complete all as specified and as directed. |
| 5 | S&F 0.80 mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 120 gm including dismantling, complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 7 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, for Fe-290 (Gde E-165) complete all as specified and directed. |
| 8 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 9 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome, complete all as specified and as directed. |
| 10 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 11 | Dismantling timber scantlings of unframed work 40 sq. cm and over in section, in any position, complete all as specified and as directed. |
| 12 | All as per Ser Item No above but in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position, complete all as specified and as directed. |
| 13 | S&F second class soft wood clean swan timber framed in scantling and fixed to the position, complete all as specified and as directed. |
| 14 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 13 sqcm but not exc 25 sqcm in section, complete all as specified and as directed. |
| 15 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 6 sqcm but not exc 13 sqcm in section, complete all as specified and as directed. |
| 16 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 17 | S&F for Softwood 2nd class Clean sawn with butt joints eaves boards 20 mm thick, complete all as specified and as directed. |
| 18 | M&L for Weather boarding, 15 to 20mm thick, wrought both sides, V-jointed to give 20mm laps and fixed , complete all as specified and as directed. |
| 19 | M&L for Wooden Flooring boarding, clean sawn, plain, 30mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps Planed one side, withbutt joints and fixed with nails supplied and fixed, complete all as specified and directed. |
| 20 | S&F 8 to 10mm thick 2nd class soft wood Planed one side & edges tongued and grooved or rebated, with nails in flooring and skirting, Complete all as specified and directed. |
| 21 | M&L for 6 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc. complete all as specified and directed |
| 22 | S&F 2nd class soft wood 15 mm thick and 100 mm wide plane one side with edges tounged and groove or rebated joint as in wall panelling fixed with nail, complete all as specified and as directed. |
| 23 | M&L for 12 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc. complete all as specified and directed |
| 24 | S&F Decorative wooden tiles of size 300x300x10mm thick of second class softwood, with fixing on ceiling of nails and glue/ fevicole over a 12 mm Plywood, design and shade as approved, complete all as specified and as directed. |
| 25 | S&F wooden wall panelling / ceiling with tongued & grooved joint laminated over high quality DHF 5 to 6mm thick fixed to timber frame work, complete all as specified and as directed. |
| 26 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, .complete all as specified and directed. |
| 27 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed. |
| 28 | Taking down of Shutters of any description n exc 1 sqm each, complete all as specified and as directed. |
| 29 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each, complete all as specified and as directed. |
| 30 | Taking down of Shutters of any description exc 1 sqm but n exc 2 sqm each and re-fixing in the same opening after easing and adjusting with existing frame or chowkat, complete all as specified and as directed. |
| 31 | S&F second class Soft wood, plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints and treating back of chowkhats etc with tar or coar black paint, complete all as specified and as directed. |
| 32 | S&F second class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 33 | S&F Plain, framed,panelled shutters thickness 35 mm of second class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers , complete all as specified and as directed. |
| 34 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 35 | S&F Glazed and skeleton shutters thickness 30 mm, second class softwood, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed. |
| 36 | S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed. |
| 37 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 38 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. |
| 39 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 40 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 41 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 42 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 43 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 44 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed. |
| 45 | S&F in repairs Rat tail mild steel (helical) door spring 300 mm long fix/welded with chowkhat, complete all as specified and as directed. |
| 46 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over and incl a coat of pink primer, complete all as specified and as directed. |
| 47 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth applying one coats of synthetic enamel paint, complete all as specified and directed. |
| 48 | M&L for preparation of old treated surface of wood and wood based surface any description not otherwise described over 10cm width or girth and applying finishing coat with synthetic varnish all as specified, Complete all as specified and directed by engr-in-charge. |
| 49 | M&L for preparation of old painted surface of wood and wood based surfaces of any description not otherwise described over 10cm width or girth including knotting and all preparation work as required and applying one coat of synthetic varnish, complete all as specified and directed. |
| 50 | Writing letters or figures ( Block, Roman, Italic or Indian) not exc 30cm height, complete all as specified and directed. |
| 51 | S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed. |
| 52 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified. |
| 53 | S&F Powder coated Anodised aluminums frame for doors, windows, ventilators with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
| 54 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 55 | S & F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement,Handles etc, complete all as specified and as directed. |
| 56 | S&F Sheet glass 4 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 57 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts, complete all as specified and as directed. |
| 58 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts, complete all as specified and as directed. |
| 59 | S&F Sheet glass 3 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 60 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 61 | Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed. |
| 62 | M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified and as directed. |
| 63 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM (1:6), complete all as specified and as directed. |
| 64 | M&L for providing cement concrete Type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in copings, plinth course, bond stones including use of form work, complete all as specified and as directed. |
| 65 | Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description, complete all as specified and as directed. |
| 66 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 finished surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 67 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished surfaces even and smooth without using extra cement with water proofing compound, complete all as specified and as directed. Note : WPC shall be measured and paid separately. |
| 68 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of ceiling in CM 1:3 finished surfaces even and smooth without using extra cement, complete all as specified and as directed. |
| 69 | M&L for rendering 15mm thick on fair faces of stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing of wall in CM 1:4 finished surfaces even and smooth without using extra cement with water proofing compound complete all as specified and directedNote : WPC shall be measured and paid separately. |
| 70 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 71 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper including applying 3mm thick wall care putty on wall , complete all as specified and as directed. |
| 72 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 73 | M&L for complete removal of existing treatment on surfaces of wall and applying two coats of distemper oil emulsion over a coat of chalk whiting, on plastered surfaces, preparatory to distempering, complete all as specified and as directed. |
| 74 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed. |
| 75 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and as directed. |
| 76 | M&L for preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed. |
| 77 | M&L for preparation of old plastered or unplastered surface of wall and applying one coat of cement base paint, complete all as specified and as directed. |
| 78 | M&L for complete removal of existing treatment on surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete all as specified and as directed. |
| 79 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash, complete all as specified and as directed. |
| 80 | M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash, complete all as specified and as directed. |
| 81 | M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 82 | Note:- Schedule of credit Rs 92,400.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
