|
| 1 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed. |
| 2 | Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete removing rubbish off the MOD land all as specified and directed. |
| 3 | M&L for 25mm thick PCC type B-0 1:2:4 ( 12.50mm graded agg) as in levelling course complete all as specified and as directed. |
| 4 | M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection complete all as specified and directed. |
| 5 | M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed. |
| 6 | M & L 600x1200xx7-8 mm Vitrified tiles satin finish with carvings , in floors fixed with spacers 3mm wide and filled/pointed with epoxy tile grout of colour as directed etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, incl dismantling old tiles and removing rubbish off the MOD land complete all as speicified and directed. |
| 7 | M & L 600x1200xx7-8 mm Vitrified tiles satin finish with carvings in skirting fixed with spacers 3mm wide and filled/pointed with epoxy tile grout of colour as directed etc. fiixed over 10mm thick plaster in CM 1:4, incl dismantling old tiles and removing rubbish off the MOD land complete all as speicified and directed. |
| 8 | M & L granite (Telephonic jet black) work ( table rubbed and polished ) 18-20 mm thick in steps,risers, jambs, pillars, window cill , cooking platform and flooring including bedding layer 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl rounding both the sides edges of granite and polishing complete all as speicified and directed. |
| 9 | M & L cutting grooves on stone slabs such as in steps and other similar situations complete all as specified and directed. |
| 10 | Taking down shutters of any description nexc 1.0 sqmcomplete all as specified & as directed. |
| 11 | S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) with 1 mm thk lamination wooden texture finish on both faces of shutter and 4 mm thk glass in panels fitted with wooden beadings with polishing and Fitted to chowkats and making good of disturbed portion of chowkat with rubbing and polishing old chowkat and fiiling holes with putty complete all as specified and as directed. |
| 12 | Supply and fix 100mm size of butt hinges, medium weight cold rolled of brass complete all as specified and as directed. |
| 13 | Supply & fix brass sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of brass of antique finish complete all as specified. |
| 14 | Supply and fix 200mm size ebrass with antique finish tower bolt fabricated type complete all as specified. |
| 15 | Supply and fix 200mm size brass with antique finish handles fabricated type complete all as specified. |
| 16 | Rubber door seal, 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screws with washers, fixed in repairs, complete all as specified and directed. |
| 17 | S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections for shutter and frame as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511 |
| 18 | M & L Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed. |
| 19 | S&F in repairs (incl taking down old window any type) three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 20 | S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed(a) SP : 20048(b) Glazing clips : 19352 |
| 21 | S&F in repair Floor door stopper of brass with antique finish body double tongue with rubber shoe and fixed of size 140 mm all as specified and as directed. |
| 22 | M & L Providing and fixing Gypsum Board 12.5 mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long & all joints to be sealed by self adhesive 50 mm wide tape incl preparation of new un decorated surfaces of ceiling incl, cornice and applying one two of distemper oil emulsion over alkali resistant priming paint over 1 mm thk putty on ceiling all as spd and directed.all as specified and directed. |
| 23 | M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed. |
| 24 | Complete removal of existing treatment and applying two coats of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns over and including priming coat of exterior primer complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality. |
| 25 | Writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, Writing letters / Numerical as directed by Engineer-in-Charge and fixing to Building with screws 4No Each, Any height of Building upto 12m height, size of letter 80 x 125mm with Max of 4 letters complete all as specified and as directed. |
| 26 | Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed |
| 27 | M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed. |
| 28 | M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed. |
| 29 | M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed. |
| 30 | Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed. |
| 31 | S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed. |
| 32 | Taking down and refixing / fixed in repairs IInd cl HW timber scantling incl replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and as directed. |
| 33 | S&F in repair for 5mm thick ACP sheet wooden texture finish along with aluminium frame work in eves board/ facia and making groove and shelf as directed by Engineer-in-Charge. |
| 34 | Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote complete all as specified and directed. |
| 35 | S & F WPC wall Panelling 12 mm thick wooden textured 3d paint finish fixed to wall with screws including concealed aluminium frame work complete including cornices, leaping and dismantling old any type of wall panelling etc complete all as specified and as directed. |
| 36 | Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed. |
| 37 | S&F 0.63 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof all as specified. |
| 38 | S & F Cast iron work grade ornomental design decorative pillars / posts ,brackets, railing, frames, balusters and similar articles design as approved incl dismantling old posts/ pillars of any type and supporting runners with temp supporteres complete all as directed |
| 39 | M & L for Providing, cement concrete 1:2:4 type B1 using 20 mm gr aggr in roof kerbs or mud stops, rounded or chamfered on edge, concreting on walls under roof sheets etc using waste of formwork complete all as specified and directed. |
| 40 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 41 | M&L for point wiring with 1.5 Sqmm PVC (FRLSH) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in PVC casing capping including CI/MS sunk boxes on wall for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge. |
| 42 | Same as item no 41 but for One 5 Amps socket point on independent board |
| 43 | Same as item no 41 but for One 5 Amps socket point on same board with other switches |
| 44 | Same as item no 41 but for One 5 Amps socket point on independent board with 2.5 sqmm copper cable |
| 45 | M&L for point wiring with two single core 4 Sq.mm size multistranded copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC casing capping and conduit accessories,confirming to IS specifications,mounted on wall/ ceiling /trusses with suitable clamps, screws etc., including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting SOCKETS OUTLET 15 Amps multi purpose on independent board ches, sockets, fan regulators etc.,including connecting up and testing, all as specified and as directed. |
| 46 | M& L for dismantling and taking down fluorescent tube light frame single/double /street light fittings of any wattage or size for repair or replacement of burnt/worn out accessories complete all as specified and directed. |
| 47 | S&F in replacement of LED tubelight batten 20 W, 4 feet length,6500 k ,100 lms/watt, Aluminium housing, glare free, PH>0.95, THD<10% complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 49 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, min 120 lm/W,5700 k, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light with deep drawn CRCA housing complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all as specified and as directed by Engr-in-Charge. |
| 50 | Taking down fan/ exhaust fan sealing cable end,dismantling blades and removing fan and blades to stores all as specified and directed by Engr-in-Charge. |
| 51 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fix in replacement of modular five step type fan regulator 120W, 2 module complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repairs lamp holder, PVC/polycarbonate type with back plate complete all as specified and directed. |
| 54 | Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-Charge. |
| 55 | Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC, the LED shall comply with L70810 Voltage range, PH>0.95, THD<10% , outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. |
| 56 | Supply and fix in replacement of modular switch piano type 10 amps one way one module complete all as specified and directed by Engr-in-Charge. |
| 57 | Supply and fix in replacement modular Socket, 6A - 2/3 pin combined 2 module, make ISI marked, all as specified and directed by Engr-in-Charge. |
| 58 | S&F in replacement modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in replacement modular Bell push 6A, 1 module complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm through and including with suitable size of PVC casing and caping and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.00 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 62 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm through and including with suitable size of PVC casing and caping and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 2.5 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 63 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 10.00 sqmm through and including with suitable size of PVC casing and caping and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 10.00 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 64 | M&L in repair for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm through and including with suitable size of PVC casing and caping and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 1.5 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. Note: for item no 61 to 64(i) Each submain wiring shall run in separate PVC casing caping(ii) two run of single core cable and one run of earth wire & one run of casing caping shall be measured together as one leangth. |
| 65 | Supply & fixing in replacement of sheet metal enclosure MCB DB SPN 12 ways,IP 43, isolated neutral bar with door earthing, double door type complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply & fixing in replacement of sheet metal enclosure MCB DB SPN 8 ways double door type with busbar all as specified and directed . |
| 67 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 6 to 32 Amps current rating complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge |
| 68 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 32 Amps current rating complete with connection testing and commissioning. |
| 69 | Supply and fix in repair for Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 70 | S&F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole, 20 Amps, 220 V complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in replacement of Modular cover with frame 2 module complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in replacement of Modular cover with frame 3 module complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in replacement of Modular cover with frame 4 module complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F in replacement of Modular cover with frame 6 module complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in replacement of Modular cover with frame 8 module complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F in replacement of Modular cover with frame 9 module with metal box complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in replacement of Modular cover with frame 12 module with metal box complete all as specified and directed by Engr-in-Charge. |
| 78 | M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. |
| 79 | Supply & fixing in repair of sheet metal enclosure VTPN MCCB DB double door, 8 way upto suitable for MCCB 125 amp, insulated copper busbar assembly, IP43 type complete all as specified and directed by engineer in charge. |
| 80 | M & L in repair for MCCB 4 pole, 415 V of 125 Amps current rating with breaking capacity 16 KA complete with connection testing and commissioning complete all as specified and directed. |
| 81 | M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick buried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to galvanised earth lead wire 4.0mm dia for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed.(Note : GI earth strip and GI protection pipe upto 7.5 mtr length shall be included in this item.) Please Enable Macros to View BoQ information |
