|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAIR TO CERTAIN BUILDINGS INCLUDING PERIODICAL SERVICES AND REPAIR TO FENCING, GATE, WALL, PATH, DRAIN, SEWAGE LINES, SEPTIC TANKS, SOKAGE WELL AND ALLIED WORKS AT VARIOUS UNITS AT BALNOI AND MANKOTE IN AOR OF AGE B/R-I UNDER GE 881 EWS. Contract No : GE/PNH-119/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed. |
| 4 | Plain cement Concrete 1:2:4 type-B0 (using 12.5mm graded crushed stone aggregate) as in copings, holdfast, plinth band, bed blocks, benching and like slightly rounded or chamfered angles including necessary form work, complete all as specified and directed. |
| 5 | Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 6 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed. |
| 7 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 8 | 35mm thick 2nd class soft wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 9 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 10 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 11 | Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 12 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 13 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with & including 5.5mm thick sheet glass ordinary quality, complete all as specified & directed. |
| 14 | Sheet glass ordinary quality, 5.5mm thick, glazing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified & directed. |
| 15 | Prelaminated particle board, 9mm thick, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed. |
| 16 | 100mm mortice lock, vertical type with 4 lever fixed, complete all as specified and directed. |
| 17 | Door closer hydraulically regulated (Aluminium extruded section body) , designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repairs,complete all as specified and directed. |
| 18 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | Factory Made Solid PVC extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 20 | Mild steel butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 21 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 22 | 250mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 23 | Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 24 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 25 | S&F in repair floor door stopper of aluminium alloy body with over all length of cover plate of 140mm and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. |
| 27 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 28 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 29 | Aluminium anodised side hung window with shutter and frame of aluminium section as per following specifications with and including aluminium handles, locking arrangement, etc. and as directed at site: -(a) WINDOW FRAME: - 65 X 39.5 X 1.5 mm section for complete frame.(b) WINDOW SHUTTER: - Top rail, Bottom rail and both shall be of size 50 X 30 X 1.5 mm shall be used.(c) GLASS PANES:- 4 mm thick glass superior quality, fixed with gasket with aluminium clip section No. 4407, jointing clips, glazing clips, rubber packing, screws etc.(d) Handle -2Nos,Tower bolts -02 Nos,complete all as specified and directed. |
| 30 | Aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wire mesh including all fittings, accessories etc complete all as specified and directed. |
| 31 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 32 | All as per item No 30 above but without glazing bars. |
| 33 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone/ concrete, glazed with putty or fixed with beads, complete all as specified and directed. |
| 34 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares not exceeding 0.50 Sqm in each pane fixed in repairs, complete all as specified and directed. |
| 35 | Stainless steel decorative curtain rod 25mm dia with decorative head on both end of rod and necessary clamps / fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 36 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 37 | False ceiling calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 6mm thick having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) fixed with and including grid system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall and suspended with hangers at every 1200 mm c/c in both directions using 4.0mm dia pre-straightened GI wire fixed with suitable cleats and fastners complete all as specified and directed. |
| 38 | Taking down of wall paneling and similar work complete all as specified and directed. |
| 39 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site but wood grain printed PVC sheet used instead of plain colour sheet as per specifications and drawing complete all as specified and directed. |
| 40 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 41 | Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified and directed. |
| 42 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 43 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality 'A' complete all as specified and directed. |
| 44 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 45 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 46 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws asspecified complete all as specified and directed. |
| 47 | 0.63 mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hooks and washers, in roofs, walls etc.complete all as specified and directed. |
| 48 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 49 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 50 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 51 | Rendering 5mm thick on fair faces of ceiling using cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete, all as specified and directed. |
| 52 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint in camouflage pattern over a coat of Primer complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 53 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 3mm thick wall care putty complete all as specified and directed |
| 54 | Preparation of newly plastered or unplastered surface on ceiling and applying two coats of white wash complete all as specified and directed. |
| 55 | Preparation of old wall plastered surface including brooming down or steel wire brushing scrapping down moulds, mass and efflorescent salts and greasy spots and applying one coat of cement base paint in camouflage pattern complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 56 | Preparation of old plastered or unplastered wall surfaces including washing,scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified and directed. |
| 57 | Preparing old plastered or unplastered surface on ceiling and applying one coat of white wash complete all as specified and directed. |
| 58 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 59 | Steel water tubing of 15 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.. |
| 60 | Taking up or down steel tubing of 20mm dia bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 61 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 62 | S&F in repair 15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 63 | S&F in repair 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 64 | S&F in repair 20mm dia PTMT gate valves, with lever type, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 65 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 66 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 67 | Tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed |
| 68 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed. |
| 69 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 15mm bore fixed in repair, complete all as specified and directed. |
| 70 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 71 | 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), complete all as specified and directed. |
| 72 | 15mm bore Stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 73 | Supply & fixed in repair, Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 74 | Supply & fixed in repair, 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed. |
| 75 | Supply & fixed in repair, 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe or fixed (minimun weight 15mm-90grms), fixed, complete all as specified and directed. |
| 76 | S &F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 77 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified & directed. |
| 78 | Wall mounted corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of 12cm wide with cromium plated bracket guard and railing 60cm long and fixed in position complete in all respect as specified & directed. |
| 79 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 80 | S&F in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolt,flushing cistern and flushing pipe) complete all as specified & directed. |
| 81 | S&F in repair Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device fixed in repairs, complete all as specified & directed.. |
| 82 | S&F in repair PVC valve less, symphonic action type flushing cistern 10 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 83 | Vitreous china wash hand basin, white , flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand coplete all as specified and directed. |
| 84 | Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe, fixed in repair complete all as specified and directed. |
| 85 | S & F in repairs Vitreous China half stall type of white with grating and union for discharge pipe (including flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 86 | S & F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 87 | S & F in repair Stainless Steel Wall Mounted Case with Soap Holder & Brush Holder fixed to wall all as specified and directed by Engr-in-Charge. |
| 88 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 89 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 90 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge. |
| 91 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified and directed. |
| 92 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 93 | PVC (SWR), Type B, 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 94 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 95 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 96 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically described complete all as directed by Engineer-in-Charge. |
| 97 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base floor finishing surface even and fair, complete all as specified. |
| 98 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 99 | Vitrified Ceramic tiles 8 to 10 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 100 | Description all as per item No 98 above but as in vertical surface in skirtings,dados including 10 mm thick back coat in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 101 | Dismantling of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 102 | Walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 103 | All as per Srl item no 101 above but except stone. |
| 104 | Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sludging / de-watering of septic tanks and soakage wells/pits of any size and depth by using honey sucker/sludge sucker Vehicle of carrying capacity of of 2000/3000 ltr and dispose sludge minimum 1 Km away from periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits and covering the same including refixing covers after cleaning all as specified and directed. NOTE:- Unit rate quoted by tenderer shall include taking out sludge from septic tanks and soakage wells/pits (liquid/semi liquid / solid) , excavation of borrow pits for dumping sludge , removing including loading/ unloading and transportation etc. Note: ST/SW will be clean by Honey sucker only as per direction of Engr -in-Charge. |
| 105 | Cleaning / clearing & maintenance of sewage lines any bore, manholes including CI stacks gully traps,floor traps under ground lines any depth by removing any type of blockage from drain 100/150mm dia by roding from manholes to manholes and flushing after cleaning including manholes sludge/ sludge water to be disposed off outside the periphery of defence land including taking off manhole covers and re-fixing the same after cleaning sewage lines. Sewage lines cleared/cleaned under this item are to be maintained and kept fully functional by removing any type of blockage. The cost of this operation /provision shall be deemed to be included in unit rate quoted by the contractor, the cost of which shall also be deemed to be included in the said item, complete all as specified and as directed. |
| 106 | Cleaning of blocked WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits all as specified and directed.Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc. |
| 107 | Taking up/down drain pipe, vent pipe, soil waste pipe (salt glazed ware, AC, PVC or reinforcement concrete) any size set in cement mortar/concrete from walls / trenches, complete all as specified. |
| 108 | PVC (SWR), Type B, 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed in repair, complete all as specified and directed. |
| 109 | RCC pipes class NP2 150mm bore laid in trenches and jointed with adhesive in any length with rubber ring joints, laid in trenches or in floor in repair complete all as specified and directed. |
| 110 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 111 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, in any type of soil, complete all as specified and as directed. |
| 112 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 113 | PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in bed concrete to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tesed ,complete all as specified and directed. |
| 114 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level and reinforcement cutas required to facilitate demolition) complete all as specified and as directed. |
| 115 | Precast cement concrete 1:2:4, type-B1 (using 20mm graded crushed stone aggregate) as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 116 | TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed. |
| 117 | 75 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate laid in alternate bays complete and finished the surface even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight complete all as specified and directed. |
| 118 | Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 119 | Plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in mass concrete, filling in foundation complete all as specified and directed. |
| 120 | 25 mm thick dry sand as in cushioning to precast concrete interlocking paver block including cosolidation complete all as specified and directed. |
| 121 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and colour pigment, any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade complete all as specified and directed. |
| 122 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and no colour pigment, any shape and size confirming to IS 15658-2006 of 60mm thick, M-35 grade complete all as specified and directed. |
| 123 | Chequered cement concrete tiles 300mmx300mmx25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors/path including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 124 | Coloured exterior heavy duty Endura tiles with chemical resistant coating of size 400mmx400mmmmx12mm thick as in floor/path, set, jointed and pointed in neat cement slurry, laid over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 125 | Precast cement concrete (1:2:4) type-B-0 (using 12.5mm graded stone crushed aggregate) as in louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame and set in CM (1:4), complete all as specified and directed. |
| 126 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 127 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face (granite,trap and basalt stone) and dressing of face beds and joints, complete all as specified and directed.. |
| 128 | Raised pointing to random rubble masonry, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 129 | Stone boulder filling hand packed tightly (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed |
| 130 | PVC pipe 110 mm dia (type-A) in weep holes including gravel filling at mouth of pipe as filter media, laid in slope complete all as specified and directed |
| 131 | Taking down cement plastering on lathing (other than wire-netting), without removing lathing in cement morter complete all as specified and directed. |
| 132 | Preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying two coats of white wash on walls including cornices, pilasters etc, complete all as specified and directed. |
| 133 | Mild steel as in posts and struts, angle horn in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securring wire mesh etc) including all necessary drilling bolting or riveting etc and including screw bolts both endsto be fitted with washers work confirming to Fe-290 Gde E-165, complete all as specified and directed. |
| 134 | Dismantling fencing wire mess and any type of fencing etc, complete all as specified and directed. |
| 135 | Fixing only chain link fencing including line wires any mesh size and type to any type of standards rails straining bolts etc including provission of binding wire complete all as specified and directed. |
| 136 | Supply only Chain link MS galvanisd (zinc coating 60gram) fencing, any size or type, complete all as specified.Note:-Type / size of fencing holes / dia of chain link fenching shall be as approved by GE. The weight of chain link fencing shall be calculated for payment as per actual weight or standard weight as per SSR which ever is less. |
| 137 | Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings, steel doors, etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specfied and directed. |
| 138 | Precast PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in bond stone, bed plate, strings coarse etc and set in CM (1:6), complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
