|
| 1 | नीव, खाई,परनाला में 1.5 गहराई तक मिट्टी की खुदाई करना , तल को कूटना , पानी डालना, बगल को संवारना , खुदी मिट्टी को बाहर निकालना, नीव भरने के बाद खाली स्थानों को पुन: मिट्टी से भरना तथा बची हुई मिटटी को 50 मीटर की दूरी तक निस्तारण करना |
| 2 | सीमेन्ट कांक्रीट नींव या फर्श में 40 मि.मी. नामीय माप की पत्थर गिट्टी(crusher broken) / ईट की गिट्टी सीमेन्ट-रेत मसाला , 1 सीमेन्ट: 5 रेत: 10 मिटटी अनुपात में मिलाकर डालना तथा कूटाई करना, तराई समेत । |
| 3 | नींव तथा कुर्सी प्रथम श्रेणी ईंट की चिनाई सीमेन्ट -बजरी 1:6 या 1:8 मसाले में, मय बगल की झिरी बन्द करने तथा तराई सहित। |
| 4 | मिट्टी का कार्य भराई में, सड़क के किनारे खदान बनाकर मिट्टी 1.5 मीटर उठान तथा 50 मीटर तक ले जाना, डले तोड़ना तथा 25 सेमी परतों में बिछाना तथा दबाना तथा समतल करना व केम्बर बनाना। |
| 5 | अव्वल दर्जे की पत्थर की पट्टियों की छत डालना, उपर तथा नीचे से जोड़ों में पत्थर की चाप के साथ 1:4 अनुपात में सीमेंट मसाले से भरना |
| 6 | 90mm औसत मोटाई में सीमेंट कंक्रीट दड़ (1 भाग सीमेंट : 3 भाग बजरी : 6 भाग 12 मिमी नापीय एग्रीगेट) डालकर दबाना व तराई सहित | |
| 7 | सीमेंट प्लास्टर दीवार पर 1:6 अनुपात में सीमेंट-बजरी मिलाकर जोड़ों को कुरेदने तथा 14 दिन तक नियमित तराई समेत। |
| 8 | सफेद रंग के चमकीली चाईना मिट्टी की टाईलों की आपूर्ति करना तथा प्लास्तर के ऊपर सीमेंट स्लरी से लगाना तथा जोड़ों में सफेद सीमेंट लगाना (प्लास्टर की कीमत शामिल नहीं है)। |
| 9 | ग्लेज्ड टाइल्स Size 30 X 45 cm |
| 10 | 110 मिमी व्यास के पी.वी.सी. पाईप का डालना मय अन्य आवश्यक सामग्री साहित |
| 11 | ईंटो की दीवार को तोड़ना, अच्छी ईंटों का चट्ठा बनाना तथा काम में न आने वाली सामग्री को 50 मीटर की दूरी तक फैंकना। |
| 12 | र्इंट के फर्स या नाली को तोड़ना, काम के योग्य ईंटों का चट्ठा बनाना तथा काम में न आने वाली सामग्री को 50 मीटर दूरी तक फैंकना। |
| 13 | पुराने प्लास्तर (Lime or Cement) को तोड़ना, जोड़ों को कुरेदना तथा सतह को साफ करना। |
| 14 | कोनिया लोहा (एंगल आईरन) के 40X40X3 मिमी की बाहरी चोखट में 22 गेज की सादा जी.आई. चद्दर के 2 पल्ले वाले दरवाजे 25X25X3 मिमी के कोनिया लोहे के चौखट (फ्रेम) में आपूर्ति करना तथा लगाना मय अर्गल स्लाईडिंग वोल्ट, चिटकनी तथा पकड़ पट्टियां आदि फिटिंग सहित |
| 15 | इनामिल पेन्ट का लेप करना 3 तह में ताकि इकसार आभा हो जाये (To give even shade) नये कार्य/पुराने कार्य पर सम सरफेस बनाना। |
| 16 | लाईट पॉइन्ट/फेन पॉईन्ट/ एक्जास्ट फेन पॉइन्ट/ काल बेल पॉईन्ट के लिए 1.5 वर्ग मि.मी. एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सिंगल कोर केबिल से, मॉडयूलर स्विच, मॉडयूलर प्लेट, उपयुक्त जीआई बॉक्स एवं 1.5 वर्ग मि.मी. एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सिंगल कोर केबिल से अर्थिग सहित आवश्यकतानुसार सतह/खाली स्थान में मध्यम दर्जे की पीवीसी कन्डूट वाईरिंग करना |
| 17 | लाईट/पॉवर प्लग के लिए 4X4 वर्ग मि.मी. एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सिंगल कोर केबिल से, लूप अर्थिंग के लिए 2 संख्या 4 वर्ग मिमी एफआर पीवीसी इन्सुलेटेड कॉपर कन्डक्टर सहित आवश्यकतानुसार सतह/खाली स्थान में मध्यम दर्जे की पीवीसी कन्डूट में वाईरिंग करना |
| 18 | मॉडयूलर प्लेट व सामने कवर सहित जीआई बॉक्स सतह/खाली स्थान में आपूर्ति करना और लगाना आवश्यकतानुसार 3 पिन 5/6 एम्पीयर मॉडयूलर सॉकेट आउटलेट व 5/6 एएमपीएस मॉडयूलर स्विच, कनेक्शन आदि (गैर निवासी भवनों में लाईट प्लग्स हेतु) |
| 19 | 240 वॉल्ट आपूर्ति के लिए शीट स्टील का सिंगल पोल एवं न्यूट्रल एमसीबी डिस्ट्रीब्यूशन बोर्ड सतह/खाली स्थान में कलईदार कॉपर बसबार, न्यूट्रल बसबार, अर्थबार, डिन बार, इन्टर कनेक्शन, पाउडर पेन्टिग मय अर्थिंग आदि आवश्यकतानुसार पूर्ण की आपूर्ति एवं लगाना (परन्तु एमसीबी के बिना) |
| 20 | Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1 anupat 4 (1 cement 4 coarse sand) Dark shade using ordinary cement.PWD BSR 2022 ITEM NO 11.17.3 RS 523 per Sqm |
| 21 | Chequerred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1 anupat 4 (1 cement 4 coarse sand) Dark shade using ordinary cement.PWD BSR 2022 ITEM NO 11.17.3 RS 523 per Sqm |
| 22 | P and F White Vitreous China Double Syphonic European W.C. (I.S 2556Mark) with mounted W.V.C. flushing cistern of (IS 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. PWD BSR 2022 ITEM NO 1.13 RS 12114 per NO. |
| 23 | P and F lst quality WVC Urinal (IS 2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm PWD BSR 2022 ITEM NO 1.14.2 RS 4637 per NO. |
| 24 | P and F C.P. brass Urinal Flush Pipe set complete with flanged brackets of approved make.1.28.1 For 4 Urinals PWD BSR 2022 ITEM NO 1.28.1 RS 1331 per NO. |
| 25 | Providing and Fixing premium qulaity WVC Wash basin with C.I. brackets duly painted and 32 mm C.P. brass waste coupling of approved make with PVC waste pipe complete 1.71.1 Size 550 mm x 400 mm PWD BSR 2022 ITEM NO 1.71.1 RS 2334 per NO. |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 2007 code) having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i c fixing the pipe with clamps at 1 metre spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 15 mm nominal size |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 2007 code) having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i c fixing the pipe with clamps at 1 metre spacing.This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 20 mm nominal size |
| 28 | Providing and fixing premium quality Angular stop cock 15mm with wall flange complete as per sample approved by Engineer in charge |
| 29 | P and F PVC Storage Tank ISI Marked (IS 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over flow pipe and 25 Cm. long wash out pipe with plug and socket, including making connection etc., complete of approved design 1000 lit |
| 30 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1.3.6 (1cement 3 coarse sand 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required |
| 31 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete |
| 32 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding |
| 33 | Providing and Fixing of 1200 mm sweep BLDC technology power saving ceiling fan which can withstand on votage fluctuations from 140 volts to 240 volts ,power factor not less then 0.9 , service value (CMM per W) minimun 6.85 , air delivery minimun 220 CMM, speed minimum 330 RPM ( tolerance as per IS 374 2019 ) THD less then 10 partisat and complete with down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe up to 80 cm , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connectionm testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products work , refer Annexure A attached with this BSR . |
| 34 | Providing and Fixing of of BLDC Technology ventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutter including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products work , refer Annexure A attached with this BSR .200 mm sweep with Min. Air delivery 800 cmh, 1600 RPM |
| 35 | Providing and Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket pole.Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) Toughened Glass cover and secondary lens on each LED and should be SMD type of 3 to 5 watt each .The System efficacy 125 lm wt and potted driver and has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff 300 V AC and Auto resetting Safety,Power Factor 0.95 driver Efficiency 85,THD(I) 10 Humidity 10 to 90 RH Working Temp 5C to 45C .driver current 750mA.The luminaire shall be BIS certified and Trade mark certified.Life Expectancy Equal or more than 50000 burning hrs with Minimum 70 lumen maintened,CRI 70 and CCT 5700K 355K.Surge protection shall be min 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark Name Engraved Embossing on die cast housing to allow traceability authenticity.Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures.(LM79 LM80) Certificate report with liable warranty of product accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products work,refer Annexure A attached with this BSR |
| 36 | Providing and Fixing of energy efficient direct fit Retrofit Polycarbonate Glass housing SMD Mid Power LED tube rod with integral driver and alumn |
| 37 | Supply, Installation,Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R 32 R 410 Green Refrigerant, wireless Remote control, suitable for working between 230V 10 with low and high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products work , refer Annexure A attached with this BSR . |
| 38 | Supply , Installation, Testing and Comissioning of IS 1475 marked self contained drinking water cooler with hermetically sealedcompressor,non CFC refrigerent suitable for operation on 230V 1pH 50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray,minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame (Cost of frame to be paid Extra )complete in all respect of the following capacity. All as per pre approved by Engineer in charge. For additional technical parameters of products work , refer Annexure A attached with this BSR .cooling capacity 60 Ltr.per Hr. and storage capacity 120 Ltrs |
| 39 | Office Table Big size |
| 40 | Computer Table |
| 41 | Computer New Genration |
| 42 | Printer with Scaner |
| 43 | Vip Chair |
| 44 | Visiter Chair |
| 45 | Desert Coolar |
| 46 | Plastic Chair Peacock |
| 47 | Contingency Please Enable Macros to View BoQ information |
