|
| 1 | Earth work excavation in all soils (including refilling) a. 0 to 2 mt. |
| 2 | Earth work excavation in Soft disintegrated rock (including refilling)a. 0 to 2 mt. |
| 3 | Earth work excavation for Open foundation (excluding refilling)a. 0 to 2 mt. |
| 4 | Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 ma. 0 to 2 mt. |
| 5 | Earth work excavation for SDR in open foundation (excluding refilling) a. 0 to 2 mt. |
| 6 | b. 2 to 3 mt. |
| 7 | Anti termite treatment to soil |
| 8 | Filling with C.S. sand |
| 9 | Filling with Excavated Earth |
| 10 | Supplying and filling with stone dust |
| 11 | Supplying and filling with gravel (including Tax collected by Govt per Cum) |
| 12 | C.C.1:5:10 for Foundation & Basement |
| 13 | P.C.C. 1:3:6 for foundation & basement using 20mm metal |
| 14 | Standardised concrete Mix M25 Grade concrete. (using crushed stone sand)a) In Foundation and Basement. |
| 15 | b. In Stilt / Ground floor |
| 16 | c. In First floor |
| 17 | d. In Second floor |
| 18 | e. In Third floor |
| 19 | Rain water harvesting using defunct borewell and providing perforated cover slab (M30)a) Providing pit |
| 20 | b) Augering 30cm dia |
| 21 | Providing Augering 30 cm dia for compound wall (M30) |
| 22 | Precast slab 50 mm tk.in C.C. 1:3:6 with fibre |
| 23 | Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement |
| 24 | Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor |
| 25 | b. In First Floor |
| 26 | c. In Second Floor |
| 27 | d. In Third Floor |
| 28 | Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floorsa. In Foundation and Basement |
| 29 | b.In Stilt / Ground Floor |
| 30 | c. In First Floor |
| 31 | d. In Second Floor |
| 32 | Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint |
| 33 | Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer |
| 34 | Ellispattern |
| 35 | Weathering course |
| 36 | Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx20mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2% |
| 37 | Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand) |
| 38 | Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand) |
| 39 | Granite Tile wall cladding using 10mmtk (Ruby red) tile in C.M 1:2, 10mm tk . |
| 40 | Antiskid Nano Polish Vitrified Flooring C.M 1:3, 20mm Thick incl. pointing |
| 41 | Supply and Laying of Granite slab Flooring in C.M 1:3 20mm Thick incl. pointing (Grey colour) |
| 42 | Providing Rajasthan Kota Stone of size 2' x 2' of 20mm thick with machine cut edges in C.M 1:3 (using crushed stone sand) |
| 43 | Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges, laying of 83mm thick paver block |
| 44 | PVC Trims (Beading) |
| 45 | Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, |
| 46 | Formwork using M.S.Sheeta.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc., |
| 47 | b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works |
| 48 | c.For Square and rectangular columns and small quantities |
| 49 | d. For Vertical wall |
| 50 | f.Curved surface |
| 51 | Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer |
| 52 | Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer |
| 53 | Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand)b. 75 mm wide |
| 54 | c. 50 mm wide |
| 55 | Painting - New \\"wood work\\" |
| 56 | Painting - New \\"iron work\\" |
| 57 | Providng one coat of Wallputty for new plastered surface |
| 58 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing |
| 59 | Plastic Emulsion PAINT including primer for inner walls |
| 60 | Plastic Exterior Emulsion PAINT including primer for outer walls |
| 61 | Painting the ceiling with one coat Plastic Emulsion PAINT including primer |
| 62 | Providing wooden Melamine polish for new wood work |
| 63 | Teak wood Wrought & Put upa. T.W. over 2 m & below 3 m |
| 64 | b. T.W. below 2 m length. |
| 65 | S & F of Magnetic door catches |
| 66 | M.S.Holdfast |
| 67 | Supplying and fixing of PVC Sliding Door with Roller |
| 68 | Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes |
| 69 | Supplying and fixing in position of UPVC window of casement type (open) for all sizes |
| 70 | Supply and fixing of UPVC Sliding Window (Three Track) |
| 71 | Supply & Fixing of WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness |
| 72 | TW panelled single door shutter with brass fittings.a. 1000X2100mm.with Brass fittings ( Single leaf) |
| 73 | TW double leaves shutter with Brass Fittingsc. 1800X2100mm.with Brass fittings ( Double leaves) |
| 74 | d . 2000X2100mm. |
| 75 | Supplying and fixing of solid core flush door shutter of thickness 35mmi door size 1.000 m x 2.100 (Single Leaf) |
| 76 | S & F of M.s Grills |
| 77 | Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods. |
| 78 | Cuddappa slab 20 mm tk.for kitchen hearth slab.a. In Ground floor |
| 79 | b. In First floor |
| 80 | c. In Second floor |
| 81 | S & F of Granite slab of size 4'x2', 18 to 20mm thick for Kitchen arrangement (jet black) (using crushed stone sand)a.Ground floor |
| 82 | PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe |
| 83 | C.I. Steps ( 5 kg) |
| 84 | S & F of 15mm dia half turn CP long body tap |
| 85 | S & F of 15mm dia half turn CP short body tap |
| 86 | S & F of C.I Manhole cover 60 x 60 cm (50kg weight ) |
| 87 | PVC Water supply (ASTM)a. 32 mm dia |
| 88 | b. 25 mm dia |
| 89 | Supplying and fixing of 20mm dia \\"B\\" Class GI pipe for Hot water line (Fully Concealed in walls) |
| 90 | Supplying and fixing of 75mm dia PVC pipe |
| 91 | Wash Hand Basin of size 550 x 400 mm (Jaquar/Equivalent make made white with pedastal type) |
| 92 | Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm |
| 93 | PVC Nahani trap (4way/2way) |
| 94 | S & F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or \\"S' trap - Other than G.F.(using crushed stone sand) |
| 95 | S & F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or \\"S' trap - Other than G.F.(using crushed stone sand) |
| 96 | S & F of E.W.C (White) 500mm with PVC SWR grade \\"P\\" or \\"S\\" Trap (using crushed stone sand) |
| 97 | PVC SWR pipe (Soil line) with ISI mark - type 'B'.a. 110 mm dia. |
| 98 | b. 75 mm dia. |
| 99 | Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials. |
| 100 | UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003a. 110 mm UPVC Non Pressure pipe |
| 101 | b. 160 mm UPVC Non Pressure pipe |
| 102 | S & F of 15mm dia CP Two way tap bib cock with health faucet approved quality with ISI mark including cost of labour charge and etc., all complete and as directed by the departmental officers. |
| 103 | Supplying and fixing of CP Stop cock including cost of all materials and all labour charges etc |
| 104 | Brass chromium plated soap tray of size 150mm x 100mm |
| 105 | Supplying and fixing of CP Shower Arm with Overhead Shower Rose including cost of all materials and all labour charges etc. |
| 106 | Supplying and fixing of 15mm dia CP Angle cock with fittings |
| 107 | Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangementa. 600mm x 600mm |
| 108 | S & F 20 mm dia Alu. Hanger Rod |
| 109 | S & F Alu Towel rail 75 cm long |
| 110 | S & F 5 pin Coat stand |
| 111 | Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work |
| 112 | Supply and planting avenue trees |
| 113 | Providing Tree guard |
| 114 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.a. Light point with ceiling rose |
| 115 | b. Light point without ceiling rose |
| 116 | c. Calling bell point with Buzzer/Calling bell |
| 117 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. |
| 118 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. |
| 119 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself. |
| 120 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places. |
| 121 | Supply and fixing of 15 amps power plug socket with switch |
| 122 | Earthing Station IS3043 (Type I) |
| 123 | Box type Fibre Fan hook |
| 124 | Charges for fixing of \\"Fan\\" |
| 125 | Supply and delivery of 48\\" (1200 mm) Fan with ISI mark with Eletronic Dimmer |
| 126 | S & F of 300 mm dia exhaust fan |
| 127 | Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved varietya) 9 watts LED bulb |
| 128 | Supplying and fixing of 18W LED TUBE LIGHTS 4' long with necessary fittings and charges for assembling and fixing |
| 129 | Supply and fixing of Bulk head fitting for 12W LED Bulb |
| 130 | Supplying and fixing of 30W LED Street light with necessary fittings (Superior variety) Charges for fixing 30W LED lamp street light fittings |
| 131 | 12 watts LED bulb for bulk head fittings |
| 132 | Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 133 | Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 134 | Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 135 | Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. |
| 136 | Supply and fixing of 20A Double pole plug and sockets in sheet steel enclosure with 32 amps DP MCB in flush with wall, with earth connection (for AC plug) of approved brand including cost of materials and labour charges etc |
| 137 | Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one No 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one No 4 pole ELCB / RCD (totally 8 ways in one segment) |
| 138 | Providing plate earthing with 600 x 600 x 3mm coppper plate buried in ground at a depth of 3 Mt from ground level with 2 runs of copper flat inter connection with earth plate to top funnel with alternate layer of charcoal and salt including supply & fixing of 40mm Dia perforated GI pipe tunneling for watering purpose including construction of necessary pit with RCC cover. |
| 139 | Supplying. Fabricating and erection of M.S Scheme Name board |
| 140 | 1.5 TR Split Type AC Unit - 5 Star Rated |
| 141 | Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay |
| 142 | Supply and laying of 5/8\\" and 3/8\\" copper pipe (Extra beyond 3 metres supplied with AC unit) |
| 143 | Supply and fixing of MS stand for fixing outdoor unit |
| 144 | Design, Supply, Delivery, Installation,Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 13 Persons (884 Kg) |
| 145 | Annual Maintance Charges for lift supplied and installed for the period of four years after the for First One Year (Free) for every Year @ 5% of the Contract Value For Second Year @ 5% |
| 146 | For Third Year @ 5% |
| 147 | For Fourth Year @ 5% |
| 148 | For Fifth Year @ 5% |
| 149 | Supply, installation, testing and commissioning of following Diesel Generator set complete with all accessories like engine, alternator, batteries with leads control panel, base frame, antivibration mounts, residential silencer,400 litres fuel tank, intake & exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hrs at factory (inclusive of consumable oil etc) necessary control wiring for battery charger etc., annunciation etc. as per specifications give below.with AMF Panel 100 kVA |
| 150 | Preparation of necessary drawings for approval by Chief Electrical Inspector to Government / CEA, obtain approval for the same, arrange for the inspection by the Electrical Inspectorate / CEA Officials and obtain safety certificate from them for commissioning the DG set |
| 151 | Supply and Insulation for the residential silencer (supply of residential silencer is included under item for DG Sets) |
| 152 | Supply and installation of M.S. cable adopter box (made of 14 SWG sheet steel) with suitable copper bus extension link from alternator. The adopter box shall have tinned copper bus bar of suitable size for phases and neutral with suitable holes for cable termination Necessary rubber gaskets between alternator and cable box shall be provided to avoid vibration between adopter box and alternator. |
| 153 | Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia upto 5m from the silencer complete with necessary supports, brackets etc. The supports shall have at intervals of not more than 2.5m |
| 154 | Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool as per IS 3677 / 1973 reinforced with chicken mesh and cladded with aluminium sheet of 26 SWG and 50mm thick with 64 Kg/Cu. Mtr. Density. |
| 155 | Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe to prevent rain water entry to exhaust pipe with provision of drain plug in the system. |
| 156 | Supply and installation of Advanced Early Streamer Emitter type Lightning arrestor made of AISI 316 Stainless Steel NFC 102 -17 standard 79 mtrs radius protection. Make :- JMV/Gravin Model 1.0 |
| 157 | Supply and Installation of copper 18 mm Copper Rod size of 8 feet length buried in earth including excavation of earth to the depth of 8 feet and closing the pit and mixing Bentonite Chemical for fluid retention. |
| 158 | Supply and Installation of 50 mm dia GI mast of 5 Mtrs length with insulators, enamel painted to approved colour part buried in floor for supporting lightning arrestor spike and copper cable. |
| 159 | Supply and installation of 70 Sqmm copper braided/Solid sheathed cable run on the external wall from terrace to the ground floor |
| 160 | CCTV, WIFI, Biometric & Public address system Advanced Technology Day and Night outdoor 5MP (5 Mega Pixel) IP CAMERA- BULLET/DOOM- h265+, DWDR,HLC,BLC, 3.mm lens, PoE SUPPORT, IP67, Lens 3.6mm, Usage : Indoor & Outdoor, Video resolution 2592 x 1520 and Higher, Audio Recording & Night vision Color image |
| 161 | Supplying and fixing of 10TB capacity mainstream SURVEILLANCE |
| 162 | Supplying an fixing of CP-UNR-4K532R8-FI 32CH. AI Network Video Recorder, Up to 64 channel IP camera input. Max. 384 Mbps incoming/recording/outgoing bandwidth mainstream, H.265, H.264+, H.264, MJPEG codec decoding. AI by Recorder: 2 Channel face detection an recognition, up to 20 face databases an 20,000 face images, 4 channel perimeter protection, 8 channel SMD plus. AI by camera: Face detection an recognition, perimeter protection, SMD Plus, Metadata, ANPR, Stereo analysis, Heat map, People counting. Support 8 SATA Hs up to 20TB each, 4 USB Ports (2 front USB 2.0 ports, 2 rear USB 3.0 ports).Support RAID 0/1/5/6/10. Support N+M cluster. Mobile Software: iCMOB, gCMOB. CMS Software: KVMS Pro Lite. |
| 163 | Supplying and fixing of CP-DNW-HPU8G2- 96-V3 10 PORT SWITCH with 8 PoE Ports + 2 Gigabit Uplink Ports8, 10/100Mbps, RJ45 ports,Max 30W output of single PoE Port IEEE802.3/802.3/802. 3u/IEEE802.3ab/802.3x2,1000Mbps:Transmission Distance:0-100m Easy and safe installation: wall mounting, esktop, Kensington security slot, Plug-and- play, Support ESD and Surge Protection. |
| 164 | Supplying and fixing of CP-SAVW-HPU4H2- 65 10/100 4 PoE Ports with 2 10/100 Mbps UPLINK 4, 10/100 Base PoE ports, 2 10/100 Base-T uplink ports. Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.1W Spanning Tree, IEEE802.3x flow control.• Surge protection 6KV commo mode, 4KV differential mode• PoE Power 25.4W• Easy and safe installation. |
| 165 | Supplying and fixing of 2U RACK FOR POE SWITCH MOUNTING etc |
| 166 | Supplying and fixing of 9U RACK FOR POE SWITCH MOUNTING etc |
| 167 | Supplying and fixing of RACK MOUNT POWER SPIKE WITH 5 SOCKETS etc |
| 168 | Supplying and fixing of 80 cm (40 inches) Advanced I series smart LED TV (Black) Resolution: (1366x768) 4K Ultra HD Refresh Rate: 60Hz 178 Degree wide viewing angle etc |
| 169 | Supplying and fixing of ADJUSTABLE WALL MOUNTING KIT FOR TV etc |
| 170 | Supplying and fixing of CAMERA EXTENSION ROD ADJUSTABLE FROM CEILING 30 CM TO 60 CM etc |
| 171 | All type of connectors, PVC Box, RJ45 JACK, DC PIN CAMERA BOX |
| 172 | Supplying and fixing of CAT6e 4PAIR CABLE ONEYWELL /CP PLUS 1MTRS etc |
| 173 | FIBER OPTICAL CABLE &LAYING (OVER HEAD– Building to Building) |
| 174 | CABLE LAYING WORKS WITH MATERIALSCLIPS, STAY WIRE Etc., |
| 175 | FIBER CABLE MEDIA CONVERTOR |
| 176 | 1 Sqmm Electrical wiring, Switch box and electrical related works |
| 177 | Supply and Installation Testing & Configuration charges includes Commisining of OFC Slicing charges, Fiber Patch card, fiber Encloser |
| 178 | Supplying and fixing of SPIKE Buster 3 power socket etc., |
| 179 | Supply, testing and commissioning of 30 W Ahuja wall speaker ASX - 312 BT Wall Mounted box Speakers with line matching transformers |
| 180 | Supply, testing and commissioning of Ahuja TZA 7000 DP Mixer Amplifiers 700 watts capacity with Built in Digital player. |
| 181 | Supply, installation, testing and commissioning of Garden Speaker LSX - 930T 30 watts with the Dimensions of W330mm x H552mm x D270mm |
| 182 | Supply and laying of FRLS PVC insulated 2 core 20/36 speaker Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods |
| 183 | Supply, testing and commissioning of Cordless microphone two handheld, 4nos x 1.5V AA Battery of model AWM- 700U2 UHF Dual handheld |
| 184 | Labour charges for installation of speakers, Amplifiers of Public Address System etc |
| 185 | supplying and fixing of indoor 802.11 ac wave 2 2x2:2 wifi access point with all mounting kit and poe (power over ethernet) injector including cost of material and labour charges for fixing in position etc., [Commercial model] |
| 186 | charges for installation & configuration of wifi ap devices |
| 187 | Supply and Installation of Basic caller ID LAN Line Phone, Key Pad , Ringer Volume Control, Tone / Pulse Switchable, Redial, Flash, Pause, Mute etc., for Warden Room (BEETEL /equivalent ) including cost of material, transportation, Checking etc. |
| 188 | Supply and fixing of Rack Mounted DVD Player as per specifications etc, |
| 189 | Supplying and installation of bio-metric attendance system with door locking arrangements and door release buttons including cat 5 cable laying up to the computer terminal and entrollment of staff including cost of all materials and labour charges etc |
| 190 | Supplying and installation and testing of the following bio metric and card based access control system with SSR report (self service recorder) stored in time clock, format converted in excel format, vivid inter face of finger print quality for single finger including all materials, labour charges and transportation etc. c) supply of biometric k30 device |
| 191 | supplying and delivery of nav-tal 7 levers hardened (4 keys)-7169 (5002) including cost of materials and labour charges for fixing in position etc., |
| 192 | Providing Nav-tal/Rim Dead bolt locks Master Key for Dormitory Doors including cost of material, transportation etc |
| 193 | Supply and Installation of INTEL I5 13th Gen Processor 8GB DDR 4 RAM 512 GB SSD 24 inch Monitor with USB , HDMI and VGA port for PC including cost of material, transportation, Checking etc. |
| 194 | Supplying and installation of UPS Inverter panel 5KVA- Static UPS Without Battery 48V Static UPS to Support Computer Load & Non Computer Load. Cost does not include batteries and battery stand , Requires 6 Batteries Only Brand : EXIDE, Warranty: 36 Months with necessary connection and labour charges etc |
| 195 | Supply, delivery and installation and fixing tv dish hd box with remote control necessary connection between tv and dish including cable, screws with relevant standard specifications |
| 196 | Installation charges for TV Dish and Settop box Connection including cost of material, transportation, Checking etc. |
| 197 | Supply and Laying of RG 11 Video Cable for TV Dish and settop box connetion. including cost of material, transportation, Checking etc. |
| 198 | Supply and Installation of Lazer A4 Duplex model All in One Printer; Automatic 2-sided Print, ADF - Multi-page Scan, Copy, High Productivity with Fast Print Speeds & Multi- tasking, Direct Mobile Print etc., (HP/equivalent) including cost of material, transportation, Checking etc |
| 199 | Wireless mouse, Internet commercial Load balancer with configuration. |
| 200 | Fire Fighting Arrangements:Supplying, installing, testing and commissioning of following dia JINDAL MS Pipes confirming to IS 1239 Pt - I Heavy C graded with butt welded joints for above 50mm and Socket welded for pipe below 50mm with two coats of Etching primer, two coats of synthetic enamel painting of approved colour.a)150mm nominal dia |
| 201 | b)100mm nominal dia |
| 202 | c) 80mm nominal dia |
| 203 | d) 25mm nominal dia |
| 204 | Supply, installation, testing & commissioning of wrapping & coating for all buried pipes. Buried pipes shall be protected with wrapping the anticorrosive material with coating of primer & wrapping with 4mm thick polymer corrosion resistant tape as per IS : 10221 with 15mm overlap as per specifications.150mm nominal dia |
| 205 | Supply, installation, testing & commissioning of 6mm thick precharged vertical leg supported air vessel (air cusion tank) of size 200mm dia & 1500mm height for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25mm dia drain valve, air release valve with stop cock on the top, 25mm dia inlet with isolating valve, safety relief valve, magnetic float type level switch with necessity fittings. Tank shall be duly painted from inside and outside complete as required. Shall be installed inside the plant room200mm nominal dia |
| 206 | Supplying, Installing, testing and commissioning of following dia CI butterfly valves ( PN 10) slim seal standard lever operated type confirming to IS 13039 with required flanges, nuts, bolts etc. complete. The valve shall be fitted with Supervisory switch for monitoring.a) 150mm nominal dia |
| 207 | b) 100 mm nominal dia |
| 208 | c) 80mm nominal dia |
| 209 | Supplying, installing, testing and commissioning of following dia Gun metal chrome finished Ball valves with fittings of screwed end type.25mm dia. |
| 210 | Supplying, installing, testing and commissioning of yard Hydrant comprising of the following,a) Single headed Hydrant valve as per IS:5290, made of SS 304 grade with 63mm dia instantaneous outlet and 80mm dia flanged inlet, blank cap, chain and hand wheel etc. |
| 211 | b) 15 M long, 63mm dia RRL hose with instantaneous couplings and Hoses shall be stored in side the hose cabinet 15 Mtrs. |
| 212 | c) 1 No. SS 304, fire Branch pipe and delivery hose couplings as per IS:903 standard of BIS. Our fire branch pipe and delivery hose couplings are made of gunmetal, stainless steel |
| 213 | Supply, installation, testing & commissioning of weather proof outdoor lockable hose cabinet made of 16 SWG CRCA MS Sheet with 2 doors & 4 mm thick glazed glass with water proof rubber beading. It shall be painted in red out side & white inside with two coats of enamel paint over a coat of primer. \\"HOSE CABINET NO.\\" shall be painted on the inner face of glass in 50 mm size block letter. Cost shall include rate of break glass box containing key of the cabinet. Cabinet size shall be of 750mm x 600mm x 250mm wall/column mounted type with necessary supports as required. |
| 214 | b1.Hose Reel drum MS pressured reel of 600 mm dia swinging type motion which allows a 180 Degree swing with19mm dia 30M Length Hose with combined rubber andthremo rinsing smooth. Bore reinforced of natural synthetic rubber. Make: Ronak SRI Model |
| 215 | Supply installation, testing and commissioning & Servicing of the connecting Hose Reel Drum pressure Tube of 25mm dia |
| 216 | Supplying, installing, testing and commissioning of fire Brigade inlet in let connection of way with 4 Nos 63 mm dia. built - in Gun metal Non- return valves instantaneous coupling type arranged on 100 mm dia. Pipe manifold and connected to wet riser main. complete. |
| 217 | FIRE PUMP ROOM EQUIPMENTSupply, erection, testing and commissioning of Electrical Motor Pump rated for 2280 LPM at 70 metres head End Suction Pump with MOC - CI Casing, Bronze Impeller, CS Shaft, Gland Packing with CG - 45 KW / 60 HP, 3 Phase, 415V, 50Hz, 2 Pole - 3000 SYN RPM, IE2-S1 Duty, TEFC - IP55,SCR Motor Factory Coupled Pumpset, with Common Baseframe, Coupling, Coupling Guard, Foundation Bolts and Red Painted |
| 218 | Supply, erection, testing and commissioning of Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 70 metres head Horizontal Multi Stage Pump Pump MOC - CI Casing, CS Shaft, Bronze Impeller, SS Sleeve, Gland Packing, Coupled Pumpset. With Baseframe, Coupling, Coupling Guard, Foundation Bolts and Red Painted. |
| 219 | Supply, installation, testing & commissioning of Diesel Engine pump of horizontal end suction to discharge Centrifugal pump of Standard Construction ith bronze impeller with gland packing pump coupled with Kirloskr make 4R1040 65 HP 2150 RPM Water Cooled Radiator Oil Engine along with base frame & coupling Head: 70 mtr Discharge: 2280 LPM Size: 120 x80 mm |
| 220 | CONTROL PANELSSupply, storing, erection, testing & commissioning of Automatic Motor Control Panel comprising generally of following & fabricated |
| 221 | Supply, erection, testing and commissioning of following dia Gun Metal Non-Return Valve of following size including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etca) 150mm nominal dia |
| 222 | b) 100mm nominal dia |
| 223 | Supply, installation, testing & commissioning of Differential type pressure switch suitable range (0-25 Kg/cm²) as per pumps discharge pressure. Quoted rate shall include necessary fittings like unions / collars / reducers, siphon etc Please Enable Macros to View BoQ information |
| 224 | Supply, installation, testing & commissioning of Differential type pressure switch suitable range (0-25 Kg/cm²) as per pumps discharge pressure. Quoted rate shall include necessary fittings like unions / collars / reducers, siphon etc Please Enable Macros to View BoQ information |
