Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in hard soil including earth mixed with boulder (except sheet rocks and boulder requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour ,T&P and dewatering if required for the work etc. complete as per specification and direction of the Engineer-in-Charge.Ground Floor |
| 2 | Providing and filling manually with approved quality of sand in layers not exceeding 150mm thick including all labour charges for spreading, laying, levelling to the proper camber, cost of watering required for the work including cost, conveyance, royality and taxes of sand labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge..Ground Floor |
| 3 | Providing Cement Concrete (1:3:6) with 40 mm down graded of crusher broken hard granite stone aggregate of approved quality from approved quarry for cement concrete work including hoisting, lowering and laying in position in layers with proper packing and ramming by means of vibrator to proper slope and level including cost of curing for 28 days, conveyance, royality , taxes of all materials required for the work, running and hire charges of machineries and all T & P required for the work, labour charges for the work complete in all respect as per the specification and direction of the Engineer-in-charge.Ground Floor |
| 4 | Cement concrete (1:2:4) for CC work with minimum compressive strength in work test of 150 kg/cm2 in 15 cm cum cubes at 28 days using 12 mm size hard black broken granite stone chips of approved quality & frorm approved quarry including hoisting,lowering & laying concrete & compacting by using vibrators,watering & curing for 4 weeks centering & shuttering & finishing the exposed surface smooth providing grooves of beads where necessary including cost, conveyance, royalties & taxes of all material & labour required for the work etc. complete excluding cost & conveyance of M.S. rod or steel & binding wires of 18 to 20 gauge & labour charges for straighting,cutting etc of the MN.S. rods or tor steel & tying grills & placing in proper position as per specification & direction of the Engineer-in-charge.Ground Floor |
| 5 | R.C.C. work in C.C. M-20 grade with 20mm size & downgrade size clean crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering, laying & compacting concrete watering and curing for 4 weeks including smooth, rigid centering, shuttering & finishing the exposed surface smooth with cost, conveyance, royalities and taxes of all materials and labour, T& P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S rods or tor steel and binding wire and labour charges for straightening, cutting, beinding, binding etc. and tying the grills and placing in proper position as per direction of the Engineer-in-charge.Ground Floora). Column Base |
| 6 | b). Plinth BandGround Floor |
| 7 | c). Column Ground Floor |
| 8 | First Floor |
| 9 | d). Wall BeamGround Floor |
| 10 | e). Roof SlabGround Floor |
| 11 | f). LintelGround Floor |
| 12 | First Floor |
| 13 | g). ChajjaGround Floor |
| 14 | First Floor |
| 15 | g). ShelvesGround Floor |
| 16 | g). Stair CaseGround Floor |
| 17 | Straightening bent up or coiled rods cutting bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and tying the grills hoisting lowering and placing in proper position as required for RCC works with cost, conveyance and taxes of M.S. Rods or Tor steel and binding wires of 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 18 | First Floor |
| 19 | Fly ash brick masonary in cement mortar (1:6) in foundation and plinth and basement and ornamental flower bed plinth moulding and similar such types of works with all necessary projections using fly bricks of 9\\"/10\\" size having a crushing strength of not less than 35kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 20 | Fly ash brick masonary in cement mortar (1:6) in superstructure using fly ash bricks of 9\\"/10\\" size having a crushing strength of not less than 35kg/cm2 including splays cutting circular moulding chamfering and corbelling watering and curing after immersing the bricks in water for six hours before use etc., complete including cost and conveyance of all materials and labour required for the work with all taxes and royalties etc. with all T&P complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 21 | First Floor |
| 22 | 25mm thick grading concrete with cement mortar (1:2:2) using 6 mm size C.B.H.C chips over roof lsab after chipping and chiselling the same and cleaning the surface by wire brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost and conveyance of all materials, labour and T&P required for the work with all taxes and royality etc. complete in all respect as per specification and direction of the Engineer-in-charge.a). Ground Floor |
| 23 | Providng and Vetrified tiles in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost, conveyance, taxes of marble / tiles , labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 24 | Providng and fixing Vertified tiles in daddo, skirting and riser of steps on 12mm thick cement mortar (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost, conveyance, taxes of marble / tiles , labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 25 | Providng and fixing Chequired tiles in floors treads of steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing with all cost, conveyance, taxes of marble / tiles , labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 26 | 6mm thick cement plaster in C.M (1:6) to RCC surface finished smooth including slury treatment including watering and curing with cost, conveyance, royality, taxes of all materials & labour with T& P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge.Ground Floor |
| 27 | 16mm (5/8\\") thick cement plaster (1:6) finished smooth to inside brick wall surface after racking out the joints including watering and curing with cost, conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 28 | First Floor |
| 29 | 12mm (1/2\\") thick cement plaster (1:6) finished smooth to outside brick wall surface after racking out the joint including watering and curring with cost ,conveyance, royality, taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 30 | First Floor |
| 31 | Providing & fixing 30mm thick flush door shutters conforming to IS:2002 (part I) decorative type , core of block board constructionwith frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands & face veneers on both face shutters inclusive of 4 nos of stainless steel butt hinges (100x60x2.5)mma). Ground Floor |
| 32 | Providing & fixingof WPC Door frames with rebate cuts & finished cross section size 75mmx45mm Or 90mmx50mm, including cost of all materials, cost of all labour, conveyance ,taxes loading,unloading,T&P etc complete as directed by the Engineer-in-charge.a). Ground Floor |
| 33 | Supplying fitting and fixing of UPVC (FINESTA/ NCL/VEKALTD three track three panell sliding window 60 series duly manufactured using UPVC reinforced profile of 108mmx45mmx2.5mm for outer frame and window sash 39mmx58mmx2.5mm profile capable of mounting single glazing system etc complete as per direction and specification of Engineer in chargea). Ground Floor |
| 34 | Providing, fitting and fixing of M.S. Door, M.S Windows, M.S. Grills ,M.S. Grill Gate and Collapsible Gate with top and bottom rails in proper position including making holes in walls, RCC structure and wood work in proper position etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with CC (1:2:4) with hard black crusher broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost ,conveyance, royality, taxes of all materials, labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.Windowsa).Ground Floor |
| 35 | First Floor |
| 36 | Providing fitting fixing of M.S. angle at size 75x75x6mm G.C.I. sheet including cost conveyance of all materials labour T & p etc. complete in all respect as per specification and direction of the Engineer-in-Charge.First Floor |
| 37 | Painting two coats with any approved enamel paint to new wood work and iron work including cost of the primer and paint sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per specification and direction of the Engineer-in-Charge.a). Ground Floor |
| 38 | First Floor |
| 39 | Finishing walls surface with Synthetic putty of approve make and finished smooth and even surface to receive painting incuding scafolding cost conveyance of all materials labour T & P etc. complete as per specifiation and direction of the Engineer-in-Charge.a). Ground Floor |
| 40 | Distempering two coats with approved quality of distemper over the interior surface of the walls including all labour charges cost, conveyance & taxes of all materials,labour,T&P required for the work etc. cmplete in all respect as per specification and direction ofthe Engineer-in-Charge.a).Ground Floor |
| 41 | First Floor |
| 42 | Finishing walls with weather coat two coats over a coat of primer of approved shade on new work/old work two coats to give an even shade including scaffolding, staging charges with cost, convyeyance, taxes of all materials, labour with T&P required for the work etc. complete as per specifiation and direction of the Engineer-in-Charge.a). Ground Floor |
| 43 | First Floor |
| 44 | Supplying fitting and fixing of stainless steel of 304 grade in hard railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mmx32mmx2mm @ .90 mtr c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost conveyance taxes of all materials labour T&P required for the work etc complete.a).Ground Floor |
| 45 | Dismantling G.C.I. or A.C. sheet roofing after carefully removing the bolts and nuts including stacking the useful materials for reuse and removing debris within 50 mt. lead with all labour T & P etc. complete in all respect as per specification and direction of the Engineer-in-Charge.a). First Floor |
| 46 | E.I WorkWiringRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 47 | -do- Group B |
| 48 | -do- Group C |
| 49 | Recessed wiring to Fan Point in -do- Group B |
| 50 | -do- Group C |
| 51 | Recessed wiring to Call Bell Point in -do- Group C |
| 52 | Recessed wiring to Exhaust Fan Point in -do- Group B |
| 53 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 54 | S/F of Angle holder replacing Ceilling Rose |
| 55 | Swich BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 56 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 57 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 58 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 59 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 60 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover |
| 61 | 4 Modular box with base & cover |
| 62 | 6 Modular box with base & cover |
| 63 | 8 Modular box with base & cover |
| 64 | 12 Modular box with base & cover |
| 65 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 66 | 2x2.5+1x1.5 (1.8.2) |
| 67 | 2x4+1x1.5 (1.8.3) |
| 68 | 4x4+2x2.5(1:8:9) |
| 69 | 4x6+2x2.5(1:8:10) |
| 70 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 71 | Circuit Breakers S/F of 'C' series SP MCB of 6 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (Make-Legrand /Schneider/Hager/Siemens |
| 72 | S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make-Legrand /Schneider/Hager/Siemens |
| 73 | S/F of 'C' series 4P MCB of 32A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make-Legrand /Schneider/Hager/Siemens |
| 74 | S/F of 4Way (8+12) TPN Double Door Distribution Board ISI marked complete with all accessories and connection etc. as required (Make : Legrand / Hager / Scheider / Seimens) 2Nos. . for Light load. |
| 75 | S/F of 4 way (4+12) TPN MCB DB double door (2.5.5) For AC Load |
| 76 | EarthingSupply & laying 25*5 mm Cu earth strip in 40mm dia GI Pipie (3.18) |
| 77 | S/F of Copper Plate Earthing (600x600x3mm)with running Copper Flat 25x5mm from coper plate to funel of 40mm dia GI PIPE heavy duty with including all accessories, excavation of earth and providing masonary work with cover plate having loccking arangement and and , charcoal, salt , funnel , tinned brass bolt, check nut and washer complete in all respect as per Govt. schedule of rate 2011 specification as per Direction of Engineering -in-Charge |
| 78 | FittingsSupply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 79 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 80 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 81 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo ) |
| 82 | S/F step type modular fan regulator |
| 83 | Supply and fixing of 400 mm wall fan with all accessories and connections (Make:Usha-Maxx Air Ultra /Crompton- WM Hiflow wave /Havells-Accelro(HS)/Anchor- Altrix HS- OWH /Orient-Wall 43/ Great White - WYNO WF/ Pollycab -Aery HS ) |
| 84 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 85 | Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 86 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 87 | S/F of 10w Watt LED Bulb |
| 88 | S/F of 1.5T 3Star, Inverter Model split type AC Machine, Make-Carrier/Bluestar/Hitachi |
| 89 | S/F of 4KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard |
| 90 | S/F of 2300 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
| 91 | S/F of 15A socket on 2Modular Board board for A.C |
| 92 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 93 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 94 | CablesProvision of Armoured cable size 3 1/2 x 25sqmm (24) |
| 95 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 96 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 97 | S/M of end termination of LV/MV cable size 3 1/2 x25 sqmm (5.8.20) |
| 98 | PanelsSupply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) 1No.2. 32 A DP MCB (Make- Legrand/Seimens/L&T/C&S/)- 1no 3. TPN Busbar-2set with DC Gland for 25mmsq aluminium armoured cable and 4Pole Spreaders link (63A-200A)4. 100Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 99 | P.H Work30 user septic tank Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.Initial lift upto 1.5 mtr4.37 m x 3.18 m x 1.50 m |
| 100 | From 1.5 mtr to 3.0 mtr depth4.37 m x 3.18 m x 0.70 m |
| 101 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC4.37 m x 3.18 m x 0.15 m |
| 102 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.4.37 m x 3.18 m x 0.10 m |
| 103 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC4.37 m x 3.18 m x 0.10 m =1.389 Cum3.07 m x 1.88 m x 0.038 m = 0.219 Cum |
| 104 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC ( a) In F&P in cm (1:3)2 x ( 4.07 + 1.88 ) m x 0.50 m x 1.10 m = 6.545 cum 2 x ( 3.82 + 1.88 ) m x 0.375 m x 0.80 m = 3.420 cum |
| 105 | Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC3.82 m x 2.63 m x 0.125 m |
| 106 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
| 107 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC-2 x (3.82 + 2.63 ) m x 0.125 m =1.612 sqm3.07 m x 1.88 m = 5.771 sqm |
| 108 | Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. ( a )12mm thick CP (1:3)2 x ( 3.07 + 1.88 ) m x 1.90 m =18.81sqm3.07 x 1.88 m = 5.771 sqm |
| 109 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.Same as above item 12mm C.P in 1:3 |
| 110 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC2 x ( 4.07 + 2.88 ) m x 1.10 m = 15.29 Sqm 2 x ( 3.82 + 2.63 ) m x 0.80 m = 10.32 Sqm 2 x ( 4.07 + 2.63 ) m x 0.125 m = 1.675 Sqm |
| 111 | Filling F&P with excavated materials including watering and ramming as per direction of EIC |
| 112 | Supplying all labour materials T&P and fixing of 2 RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC2.20 m x 0.45 m |
| 113 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 114 | Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
| 115 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 116 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C Door - 6 x ( 2.10 + 2.10 + 0.75 ) =29.70 |
| 117 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Door - 6 x 2.05 x 0.70 =8.61 |
| 118 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Ground Floor Wall MO Toilet-1 x 4.80x 2.10 =10.08 sqm ,Day care toilet- 1x 5.77 x2.10 = 12.12 sqm General Toilet- 1 x 26.06 x2.10= 54.73 sqm |
| 119 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground FloorMO Toilet-1x 1.22 x 1.524 = 1.86 sqm , Day Care Toilet - 1x 2.04 x 1.22 = 2.49 sqm General toilet- 3 x 1.22 x 1.524= 5.58 sqm, General Lobby- 5.33x 4.27=Door sill- 6 x 0.75 x 0.25 =1.125 sqm |
| 120 | Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
| 121 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 122 | 375mm thick wall |
| 123 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 124 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 125 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. |
| 126 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) |
| 127 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 128 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe |
| 129 | 160mm dia UPVC SWR Pipe |
| 130 | 110mm dia U-PVC S. Trap |
| 131 | 110mm dia U-PVC P. Trap |
| 132 | 110mm U-PVC S/J with Door |
| 133 | 110mm U-PVC door bend |
| 134 | 110mm dia U-PVC Plain bend |
| 135 | 110mm U-PVC Plain Tee |
| 136 | 110mm U-PVC Cowl |
| 137 | 125mm dia CP Grating |
| 138 | 75mm dia U-PVC SWR Pipe |
| 139 | 75mm dia U-PVC Plain Tee |
| 140 | 75mm U-PVC Door Bend |
| 141 | 75mm U-PVC Plain Bend |
| 142 | Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm Stainless Steel kitchen Sink heavy good quality |
| 143 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 144 | Pedestral 550x400mm WHB |
| 145 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality |
| 146 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Jaquar make . |
| 147 | CP Towel ring heavy Stainless steel withJaquar make . |
| 148 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 149 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm) |
| 150 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 151 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra ) |
| 152 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 153 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 154 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber |
| 155 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep |
| 156 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 157 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing |
| 158 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal) |
| 159 | 25mm dia C-PVC Pipe (external) |
| 160 | 40mm dia C-PVC Pipe (external) |
| 161 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock JAQUAR Make |
| 162 | 20mm dia cp concealed stop cock JAQUAR Make |
| 163 | 15mm dia cp angle stop cock JAQUAR Make |
| 164 | 15mm dia cp bib cock S.B. JAQUAR Make |
| 165 | 15mm dia cp bib cock L.B. JAQUAR Make |
| 166 | 15mm dia CP Two way bib Cock JAQUAR Make |
| 167 | Health Fuccet JAQUAR Make |
| 168 | 15mm dia CP flange JAQUAR Make |
| 169 | 15mm dia CP Extension piece JAQUAR Make |
| 170 | 25mm dia Brass Ball Valve |
| 171 | 40mm dia Brass Ball Valve |
| 172 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (1st Floor) |
| 173 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity tank 1st floor |
| 174 | Additional ht of 5.00mtr |
| 175 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 176 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 177 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 178 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 179 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 180 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) |
| 181 | SINKING OF TUBE WELLSupplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.Setting for depths from 0 mtr to 100 mtr |
| 182 | Supplying all materials labour T&P and transportation of boring pipe, top casing grouting pipe, PVC pipe and fitting pvc well screens, cement bentonite and gdravels etc from sectional store to the site and return of departmental material after use including loading and unloading etc. all complete as per dir of EIC. (Current schedule of rate) |
| 183 | Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC |
| 184 | Supplying all labour Tools and plant and plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing thebore by means of pipe cylinder etc. all complete as per direction of EIC.Reaming from 100mm to 150mm dia, 0mtr to 360mtr |
| 185 | Reaming from 150mm to 200mm dia, 0mtr to 360mtr |
| 186 | Reaming from 200mm to 250mm dia, 0mtr to 360mtr |
| 187 | Supplying all labour, tools and plant and jointing materials and lowering the 300 mm dia top casing pipes into the position and removing the same after use all complete as per direction ofEIC. |
| 188 | Supplying all labour tools and plant and jointing materils and lowering the pvc casing pipes, fittings and well screens in jposition, including fitting and fixing of centraliser cutter plug and washing the bore etc. complete as per the direction of EIC. Lowering 125mm dia pvc casing & Strainer pipe |
| 189 | Cost of 125mm dia 80Sch PVC Pipe |
| 190 | Cost of 125mm dia PVC Strainer pipe |
| 191 | Plugcutter |
| 192 | Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 125mm dia pvc casing pipe etc. all complete as per the direction of EIC excluding the cost of cement. |
| 193 | Supplying all labour, tools and plant and packing the bore with washed dgravel (size P-6) around the pipes in good quality excluding cost of gravel etc. all complete as per the direction of EIC. |
| 194 | Labour charges |
| 195 | Supplying all labour tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3mtr of 125/100mm dia pvc casing pipe properly as per the direction of EIC (excluding the cost of cement) |
| 196 | Labour charges |
| 197 | Supplying all labour, tools and plant and materials for cealing and developing the tube well with compressor continously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of EIC |
| 198 | Labour Charges Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
