|
| 1 | Repairs, easing & adjusting of shutter without taking down shutters, of any description exc 1.00 sqm & nexc 2 sqm each all as directed. |
| 2 | Taking down chowkats with shutter n.exc 1.50 Sqm each (without taking off shutter for the chowkats) complete all as specified and directed. |
| 3 | Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter from the chowkats) complete all as specified and directed. |
| 4 | Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 5 | S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock strike, plate etc of size 105x60mm complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in door frame etc complete all as specified & directed. |
| 7 | S&F factory made single extruded WPC solid door frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum Compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. . |
| 8 | S&F 35 mm thick factory made single extruded WPC solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 9 | S&F 35 mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed. |
| 10 | S&F 2nd class hard wood (Hallock) factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc , sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and directed. |
| 11 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 12 | M&L for preparation of new wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 13 | M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/bolt in metal/wooden frame to be carried out complete all as specified and directed. |
| 15 | S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed. |
| 16 | S&F aluminium alloyed handle fabricated type anodized of size 150 mm long ISI Marked complete all as specified and directed. |
| 17 | S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 through bolt or with screw complete all as specified and directed. |
| 18 | S&F aluminium alloy, anodised, sliding door 300 mm long ISI Marked bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 19 | M&L for remove existing treatment ,all loose gravel cement mortar , dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface . Repair all joints & cracks and apply primer with smart care epoxy primer to seal the pores/cracksand enhance the adhesion of the coating. (a) Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilutioon of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12 Hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5 Hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years. Note : Application of water proofing treatment shall be done by Authorised Applicator only . |
| 20 | S&F in repair cutrain rod 20mm dia of stainless steel with fixing brackets, stops, rollers etc fixed to wall with screws, PVC plug complete all as specified and directed. |
| 21 | M&L glass fibre reinforced gypsum board 12 mm thick for insulation and accoustic purposes, 595mmx595mm in size, fire resistance with micro tegular & tegular edge, fixed with nails to timber frame work or with staples on snap grid fixed in ceiling incl dismantling of existing board with frame work complete all as specified and directed by Engr-in-charge. Note:-Frame work for ceiling shall be measured and paid separately |
| 22 | S&F hangers 6mm dia GI (upto 1200mm length adjusting level as required fixed to roof slabs by means of ceiling cleats made out of GI hanger flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long incl anodised aluminium snap grid frame work for false ceiling all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastnor of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire including dismantling of existing ceiling with framework complete all as specified and as directed. |
| 24 | S&F 25mm thick WPC Louvers in wall cladding, made of high quality exterior grade WPC(density 650-750 kg/m3), UV resistant, termite-proof & weatherproof, of approved design, size & shade, fixed directly on wall surface using suitable adhesive and concealed stainless screws, including preparation of surface, alignment, cutting, finishing of joints and making good all damages to match existing surface complete in all respect as per manfactures instruction and direction in colour combinations including fillets for corners and as required & including dismantling of existing wall cladding with framework complete all as specified & directed. |
| 25 | S&F in repair 2 mm thick uv marble sheet solid wall panelling consisting of printed pattern including all necessary fixing arrangement of screwing, bolting, adhesive of solvant and fixing at site on formed by sticking high density EPS, flame retardent (TF) grade, heavy duty with tipper strip weather proof, water proof, termite proof including all C, U type and like with matching of panelling fixing at border of panelling and complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F solid 12mm thick plain/colour CNC cutting design sheet of any pattern including necessary fixing arrangment such as screwing, bolting, adhesive solvent on PVC frame all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing. |
| 28 | S&F of 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F in repair 4mm thick aluminium composite pannel (ACP) sheet for wall cladding, ceiling etc, colour incl necessary aluminum frame work and fixing arrangment such as screwing, bolting, adhesive solvant on PVC frame all as specified complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F 7-8 mm thick PVC hollow wall panelling consisting of wood grain printed pvc sheet inclusive of solvant cement and fixing at site on pvc frame formed by sticking high density eps (ter grade) heavy duty with taper strip weather proof,water proof, termite proof incl all C and U type pvc section fixing at border of paneling and incl taking down existing panelling complete all as specified and as directed by Engr-In-Charge. |
| 31 | Demolition of wall ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs blankets any thickness including cover fillets, complete all as specified and directed. |
| 32 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick joint free on and including 10mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling of existing tile complete all as specified. |
| 33 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.11sqm but n. exc 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 34 | M&L for dark/light coloured vitrified tiles (double charged) 8-10 mm thick joint free (square/rectangular) area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in CM 1:4 including dismantling of existing tile complete all as specified. |
| 35 | M&L for granite (of any type) work (table rubbed and polished) 18 to 20mm thick in steps, jambs, pillars, window cills, cooking platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of existing work complete all as specified and directed. |
| 36 | Demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc |
| 37 | M&L for brick work with sub class 'B' old size fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 38 | M&L for 15 mm thick rendering with ready mix mortar on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 39 | M&L for 12 mm thick rendering with ready mix mortar on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 40 | M&L for 5 mm thick rendering with ready mix mortar on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 41 | M&L for preparation of new plastered surface and applying two coats of cement base paint on wall surface complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper of wall over a coat of white putty on plastered surface wall complete all as specified and directed by Engineer-in-Charge. |
| 43 | M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F 500 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 45 | S&F 1000 ltr capacity rotational moulded polyethylene 3-layer white water storage tanks (cylindrical vertical with closed top) hoisted and fixed in postition all as specified in SSR Part I including dismantling of water tanks complete all as specified and directed. |
| 46 | S&F in repair ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore complete all as specified and directed. |
| 47 | S&F in repair gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repair stop valves or angel valve cast copper alloy 15mm bore fancy type chromium plated alloy with butterfly handle screwed down for high pressure, screed on both ends, fixed with iron pipe etc complete all as specified and directed. |
| 49 | S&F in repair bib taps cast copper alloy 15mm bore fancy type chromium plated alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 50 | S&F in repair pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed. |
| 51 | S&F in repair brass chromium plated shower rose fancy type 125mm size with swivel joints, any size, including fixing to steel pipe or union with brass CP arm 195mm long, 15 mm size complete all as specified and directed. |
| 52 | S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 60 cm long with flanges complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified complete all as specified and directed by Engr-In-Charge. |
| 54 | S&F in repair 15 mm brass CP, WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repairs vitreous china wash down water closet (pedestal pattern) fixing with bolts, white colour, incl stainless steel L-type jet spray with 1m hose pipe, connection to trap and to flushing pipe, anti-syphonage pipe, etc. incl soft closing seat cover complete including making good to floor complete all as specified and directed. |
| 56 | S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with a set of integral foot rest with `P’ or `S’ trap including water connection to trap and flushing pipe etc complete and bedding in PCC 1:7:12 type F-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. |
| 57 | S&F in repair vitreous China wash basin, with pedestal white flat back, size 550x 450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and coupling complete all as specified and directed. |
| 58 | S&F in repair vitreous China table top wash basin, white rectangular bowl, size 550X400X140mm excluding taps but including coupling complete all as specified and directed. |
| 59 | S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern) white with grating, waste coupling and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing aroug urinal back in cement, grating and union for discharge pipe incl PTMT waste coupling, waste pipe, urinal spreader complete all as specified and directed. |
| 60 | S&F in repair vitreous china coloured WC italion finish pedestal pan with attached vitreous china flushing cistern (monolithiic type) of push button type having dual flushing cistern of same colour includingsoft closing PVC seat cover of same colour including CP Jet chromium plated with pvc connection 15mm bore complete all as specified and directed. |
| 61 | S&F in repair Vitreous china urinal partition white of size 310x700 mm fixed with wall by steel screw complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repair PVC low level duel flushing cistern (duel type) 10 ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc complete all as specified and directed. |
| 63 | S&F in repair grating doom 100 mm dia with waste hole of PTMT complete all as specified and directed. |
| 64 | S&F GI tubing 15mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up or down complete all as specified and directed. |
| 65 | S&F GI tubing 20mm bore medium grade, fixed to wall/ ceiling or floor etc with all fittings ISI marked including taking up or down complete all as specified and directed. |
| 66 | Dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches, if required. |
| 67 | S&F PVC (SWR)pipes 110mm dia in any length with rubber ring joint fixed to wall/floor upto 12m height complete all as specified and directed. |
| 68 | S&F in repair PVC (SWR) bends 110mm dia, in any radius, complete all as specified and directed. |
| 69 | S&F in repair 110 bore PVC(SWR) Branch pieces (Single T), single (equal or unequal ), ordinary or inverted ) ( or with parallel branches with oval access door complete all as specified and directed. |
| 70 | S&F in repair PVC vent cowl of size 110mm. |
| 71 | M&L in repair for PVC(SWR) floor trap plain including jointing with solvent cement 100mm dia complete all as specified and directed. |
| 72 | S&F in repair 600mm X 450mm(min size) beveled edge mirror of selected quality glass fancy type as approved by GE and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 73 | M&L for preparation of old plastered surface of walls rubbing down, making good holes, cracks etc and stopping on existing distempered surfaces and applying one coats of oil bound distemper on wall incl cleanning the floor/, joinery, surfaces, glass pans complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for preparation of old plastered surfaces of wall by brooming down, making good holes, cracks, etc and applying one coat of white wash ht upto 12m complete all as directed by Engineer-in-Charge. |
| 75 | M&L for preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. on existing distempered surfaces and applying two coats of interior acrylic emulsion paint over a coat of 1mm thick wall putty on wall complete all as specified and directed by Engineer-in-Charge. |
| 76 | M&L for preparation of old plastered surface of walls rubbing down, making good holes, cracks, etc and stopping etc on existing distempered surfaces and applying one coats of cement base paint on wall ht upto 12m incl cleanning the floor, joinery, surfaces, glass complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&f in repair UPVC bath vanity cabinet (permium quality) size 36x24x36 inch, 18mm thick with oval type table top washbasin design and coloured approved by GE with stainless steel foot rest and autoclosing stainless steel hinges complete all as specifed and directed. |
| 78 | S&F in repair PVC waste pipe 32mm dia 800mm to 1200 mm long fixed to wash fitting of wash basin and sink all as specified and directed. |
| 79 | S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 80 | S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 completeincl two coat of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts (four Nos for each window). (viii) Two of Synthetic Enamel paint over a coat of red oxide primer. Note: Wire cloth, glass shall be measured and paid for separately |
| 81 | S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/TD-1019/08 Sh 1/3 to 3/3 including Making good dismantled portion in PCC 1:2:4 type B-1 for hold fasts, two of synthetic enamel paint over a coat of red oxide primer, incl taking down old existing window/ventilator complete all as specified and directed. Note: Glass/ wire cloth shall be measured and paid for separately. |
| 82 | S&F anodised aluminium door shutters, aluminium section weighing average not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. incl taking down old existing complete all as specified. |
| 83 | S&F anodised aluminium window/ ventilator shutters side hung type without sash bars, aluminium section weighing average not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) incl taking down old existing complete all as specified. |
| 84 | S&F anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc.incl taking down old existing and complete all as specified. |
| 85 | S&F 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 1.00 sqm in each pane in aluminium door or window shutter complete all as specified and directed. |
| 86 | S&F in repair 4.8mm thick black sheet glass ordinary quality in squares or rectangular not exceeding 1.00 sqm in each pane in aluminium door or window shutter incl rubber packing, anodised aluminium snap beading complete all as specified and directed |
| 87 | S&F in repair aluminium mesh grill, 5.50mm nominal dia of wire and average width of aperture 55X55mm and fixed with tinned tacks, or galvanised wire staples for aluminum window complete all as specified and directed. |
| 88 | Petty repair to existing in built aluminium door, locks, hinges incl necessary making the lock/glass/ adjusting shutter complete serviceable all as per existing pattern as directed by Engineer-in-Charge incl provision of duplicate keys as required. |
| 89 | S&F in repair 10mm tinted toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 90 | S&F in repairs mortice lock, aluminium vertical type size 65mm 2 levers complete all as specidfed and directed. |
| 91 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 92 | S&F in repair floor door stopper 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L for complete removal of existing treatment, preparation of old surfaces of wall, making good holes, cracks etc and applying two coats of 100% premium exterior acrylic emulsion paint of apex ultima or equivalent having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior weather paint of required shade company depot tinted with silicon additives incl one coat of alkali resistance primer with min 1mm thick putty complete all as specified and directed. |
| 94 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 73,995/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
