|
| 1 | NOTE:-(i) The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.(ii) It is highlighted that the certain condition of General Condition of Contracts (IAFW-2249) has been modified as per direction of MoD i.e. inclusssion of Performance Security, deletion of Risk & Cost Provisions and increase in defect liability period all as per tender documents. The tenderers should keep in mind while quoting their offer. (iii) (Applicable for all items/parts):- The bidders/contractors are advised to refer Notes on BOQ/SCH'A' before entry/quoting the rates. Lumpsum price workedout by the tenderer for BUILDINGS WORKS as listed in Schedule ‘A’ Part-I. |
| 2 | Design and Construction of 06XOR SINGLE LIVING ACCN IN 402 LT AD REGT COMP AT BHALUKMARA in RCC Framed Structure as per Scales of Accomodation-2022, List of Drawing and specification given in Sch A Notes and Particular Specifications including plinth, Flooring, Joinery and Finishes complete all as specified and as directed. |
| 3 | Lumpsum price workedout by the tenderer for SITE CLEARENCE, AREA DEVELOPMENT, EARTH WORK & EXCAVATION as listed in Schedule ‘A’ Part-II. |
| 4 | Lumpsum price workedout by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III. |
| 5 | Lumpsum price workedout by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV. |
| 6 | Lumpsum price workedout by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-V. |
| 7 | Lumpsum price workedout by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VI. |
| 8 | Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-VII. |
| 9 | Sch 'A' Part-VIII (MISC B&R AND E&M ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as \\"Rs 0.00\\" under Col. 5 siginifies this fact only.INTERNAL ELECTRIFICATION |
| 10 | Supply and fixing street light bracket fabricated out of GI Tubing light grade 40 mm bore Bend to the shape as directed and of length 1.5 mtr complete with mounting MS clamp of flat iron size 40 X 5mm of suitable length 02 pairs incl nut bolts etc of suitable size, including all as specified and directed. |
| 11 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed |
| 12 | INTERNAL WATER SUPPLY |
| 13 | Supply & fixing 15mm dia angular stop cock with wall flange complete all as specified and directed. |
| 14 | EXTERNAL WATER SUPPLY |
| 15 | Material and labour Construction of brick masonry chamber of 60 cm x 60 cmx 60 cm [internal dimensions] suitable for 50mm bore sluice valve with PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation brick wall with sub class ‘B’ brick, old size built in CM 1:6 PCC [1:2:4] type B1 [using 20 mm graded stone aggregate for coping rendering in CM [1.4] 15 MM thick including provision of MS sheet cover 3 mm thick including handle, hinges locking arrangements etc with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangement including necessary excavation and earth work in any type of soil complete all as specified and as directed. |
| 16 | EXTERNAL ELECTRIC SUPPLY |
| 17 | Supply , install, testing and commissioning of cubical housing cabinet type CPRI approved of size 1100 x 1100 x 600mm Confirming to IP55 LT panel board outdoor type, platform mounted factory made, totally enclosed dust and vermin proof openable from both front and rear side made out of 3.15 mm thick CRCA MS Sheet and built upon suitable size MS angle iron frame work, having front and rear hinged doors, lifting lugs (2 Nos), earthing strips at rear side, bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts, spring and washers. The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coat of synethetic enamel paint over a coat of red oxide primer. The panel should be suitable for 415 volts, 50Hz, 3 phase 4 wire system and internal connection should be provided with aluminium strips of suitable size and necessary foundation work and comprising following (For Fire Pump) :- System Voltage-415V, 3-Ph, 4 wire, 50 HZAluminium BUSBAR rating -100 Amps, cable entry (incomming and outgoing ) form bottom with cable gland (a) INCOMING(i) MCCB 100A 4 Pole 415 V 36 KA-01 No.(b) OUTGOING(i) MCCB 63A 4 Pole 415 V 25 KA -02 Nos(ii) MCB DP 6-32 Amps, 240 V, 'C' curve, 10 kA -01 Nos(iii) Digital Multifunction meter with 3 Nos CTs & selector switch - 1set (iv) Space for One MCCB 4 Pole upto 63 Amps Please Enable Macros to View BoQ information |
