|
| 1 | Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra cost is permissble for the material and labour for making good the disturbed surface) |
| 2 | Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 Square Meter but not exceeding 4 Square Meter each and removing from site complete all as specified.( The distrubed surface during taking down shall be made good by the contractor withot any extra cost for fixing new one of any description. No extra cost is permissible for the material and labour for making good the disturbed surface) |
| 3 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and directed. |
| 4 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and directed. |
| 6 | M&L for Machine cut Kota stone slab 20-25 mm thick as in floors laid over and including 20 mm thick screed bed using CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | M&L Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm in skirting,over and including10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 9 | Dismantling of AC(Corrugated, semi corrugated etc) sheets in roof coverings including ridges Note. Dismantling will have to be carried out only in area complete all as specified and directed. |
| 10 | Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets or snap grid complete all as specified and directed. |
| 11 | M& L for asbestos 4 mm thick E-board Pre-painted ( Classic ) of size 60 X 60 cm laid on and included GI snap grid frame work (Grid size 60 X 60 cm) for false ceiling with powder coated GI angle of size 25 X 25 mm , main runner ' T ' of size 25 X 40mm secondary runner 'T ' of size 25 X 30 MM suspended with 3 mm GI wire with butterfly clips for levelling complete all as specified and directed.Note : Rates are inclussive for all factors such as making holes ,cutting chases and making good to existing walls in cement mortar 1 : 3 or PCC 1: 2 : 4 Type B1 as per existing finish all as directed by Engineer - in -charge. |
| 12 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 13 | S & F pre painted galvalume aluminum zinc coating GI based profiled steel sheeting 0.50mm thick of any colour having tensile strength of 550 MPA as in ridge ,gutters etc fixed with self tapping screws as specified complete all as specified and directed. |
| 14 | S & F aluminum anodized barrel tower bolt of extruded section and fixed complete of Size 200 mm long complete all as specified and directed. |
| 15 | S & F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, 300mm long, complete all as specified & directed. |
| 16 | S&F extruded aluminium alloy handles fabricated type, anodised 150 mm long complete all as specified and directed. |
| 17 | M&L for forming holes exc. 50 cu cm but n exc 100 cu cm for balusters, newels, rag-bolts, etc. and grouting with cement mortar 1:2 after balusters, etc. are fixed, complete all as specified & directed. |
| 18 | M & L for cement concrete type B1, 1:2:4(20mm graded aggregate) as in bed block for securing hold fasts etc complete all as specified and directed. |
| 19 | S&F pressed steel frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 20 | M&L PCC 1:3:6 (using 12.5 mm graded aggregate as mass concrete filling in hollow portion of the door frames complete all as specified & directed. |
| 21 | S&F 2nd class hard wood 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauze divided in to squares with plain, chamfered mitred and rebated ssh bars, any number etc (without sash bar) complete all as specified in SSR Part I, section 8, clause 8.24(a) complete all as specified and directed. |
| 22 | S&F 30mm thick, flush shutters, soild core construction, with block board core and plywood face panels commerical type both faces with lipping/frame to match and complete all as specified & directed. |
| 23 | S & F in repair 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 24 | S&F for 150mm long floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 25 | S&F 20 mm dia stainless steel curtain rod in one length per door/window, fancy type provided with side SS globe and bracket on each end, fixed in repairs, complete all as specified and directed. |
| 26 | Dismantling timber scantlings 40 sqcm and over in section in any position (framed work ) complete all as specified & directed. |
| 27 | Dismantling timber scantling 40 Sqcm and over in section, as in fillets, rails, posts, rafters, purins etc(unframed work), complete all as specified & directed. |
| 28 | S&F `Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (gde E-250) complete all as specified and directed. |
| 29 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 W (gde E-250) complete all as specified and directed. |
| 30 | S&F plates (plain or chequered) chAnnels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachement conforming to Fe 410 W (Gde E-250) complete all as specified and directed. |
| 31 | S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or sqare n.exc 30 cm long complete all as specified. |
| 32 | S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/C-TD /032/13 sheet 1/2 to 2/2, complete all as specified and directed. |
| 33 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 34 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 35 | M& L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 36 | M& L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC WILL BE MEASURED AND PAID SEPERATELY |
| 37 | Supply only Water Proofing Compound complete all as specified and direcred. |
| 38 | M& L 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed.(Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners. |
| 39 | M& L complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of walls and applying 3 mm thick wall care putty, primed with priming paint and two coats of oil bound distemper all as specified and as directed. |
| 40 | M&L for applying two coats of OBD over 2 mm wall care putty including preparation of newly plastered wall surfaces including one coat of primer complete all as specified and directed. |
| 41 | Applying two coats of synthetic enamelled paint over a coat of pink primer on wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 42 | M& L applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
| 43 | M& L applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
