|
| 1 | Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed. |
| 2 | Material and Labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | All as per Srl item No 2 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 1 shall be reused after necessary cleaning of mortar). |
| 4 | Material and Labour for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 complete all as specified and directed. |
| 5 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 6 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 7 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed |
| 8 | Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed. |
| 9 | Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces complete all as specified and directed. |
| 10 | Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces complete all as specified and directed. |
| 11 | Material and Labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces complete all as specified and directed. |
| 12 | Material & Labour preparing old decorated plastered/unplastered wall surfaces including cornices by brooming down with steel wire brushes and scraping down smokes, spots etc applying one coat of oil bound distemper and filling holes etc to make surface smooth complete all as specified and directed. |
| 13 | Material and Labour for applying two coats of whitewash on ceiling including preperation of old plastered/old decorated surfaces complete all as specified and directed. |
| 14 | Material and Labour Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of old surfaces complete all as specified and directed. |
| 15 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed |
| 16 | All as per Srl item No 12 above but size of opening exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr |
| 17 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 18 | Material and labour for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 complete all as specified and directed as follows:-(a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf(c) MS tower bolt 150mm long - 02 Nos per leaf(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf(e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty(i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leafNote :- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately. |
| 19 | Material and labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-1019/08 dt 01.05.08 incuding cutting holes complete all as specified and directed as follows.(a) 3mm thick pin headed type glass sheet glazing with oil putty and Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesof appropriate size.Note:- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately. |
| 20 | Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed. |
| 21 | Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed |
| 22 | Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
| 23 | Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 24 | Supply and Fixing in repairs Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed. |
| 25 | Supply and Fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels. |
| 26 | Material and Labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces. |
| 27 | Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 28 | Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed. |
| 29 | Supply and Fixing 150mm long Aluminium handles, cast type anodised. |
| 30 | Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 31 | Hacking out old broken glass from wooden/ steel window cleaning the surface and removing from the site, thenafter Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requiremnets. |
| 32 | Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty. |
| 33 | Supply and Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and drawing. |
| 34 | Supply and Fixing 28 to 30 mm thick factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing. |
| 35 | Supply and Fixing powder coated aluminium frame for doors ,windows, ventilators, partition with one or more rebates including joining cleats, rubber neoprene packing for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) |
| 36 | Supply and Fixing powder coated aluminium glazed shutter(for doors) Al-section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading. ( Min. thickness of powder coating 50 micron) |
| 37 | Supply and Fixing Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron) |
| 38 | Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening complete all as specified. |
| 39 | All as per item No 37 here in above but area not exc 1 sqm each window shutters. |
| 40 | Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed |
| 41 | Supply and Fixing in repairs door closer hydraulically regulated, (Alminium die cast body) designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed |
| 42 | Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed make-Godrej |
| 43 | Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 150mm. |
| 44 | Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed. |
| 45 | All as per item no 44 above but of 2 levers. |
| 46 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 47 | Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof/wall coverings. |
| 48 | Material & Labour 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer as in framings, wall, etc including drilling holes for screws complete all as specified and directed. |
| 49 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 50 | Material & Labour structural Steel work invertcal posts, framings and the like of any secion incuding necesssary cutting weldings etc complete conforming to FE-290 Gde E-165) complete all as specified and directed. |
| 51 | Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces. |
| 52 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 53 | Material & Labour for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.18 sq.m but not exceeding 0.38 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed EIC. |
| 54 | All as per Srl item above here-in-before but in skirting over 10mm thick cement screed in CM 1:4 complete as specified |
| 55 | Supply and Fixing non skid ceramic light coloured tiles 7 to 8.5 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed. |
| 56 | Supply and Fixing glazed ceramic coloured designer tiles 450x300mmx6/7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.Note: Colour and design of tiles as per approval of Engineer-in-charge. |
| 57 | Material & Labour for 50 mm thick PCC 1:4:8 type D2 (40mm graded aggregate as in sub base complete. |
| 58 | Material & Labour sand filling under floors or in foundation including watering and consolidation |
| 59 | Material & Labour machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete |
| 60 | Material & Labour for 20mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed by EIC. |
| 61 | Material & Labour for chequered cement concrete tiles 20cmx20cmx25mm thick, set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment, complete all as specified and directed by EIC. |
| 62 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar. |
| 63 | Material and Labour for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4. |
| 64 | Supply and Fixing in repairs vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately. |
| 65 | Supply and Fixing of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately. |
| 66 | Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed. |
| 67 | Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) Make-Prayag/Shakti |
| 68 | Supply and Fixing in repairs PVC Jet spray suitable for EWC. |
| 69 | Supply and fixing Chromium plated Health faucet in repairs with 1.5 metre long chain. |
| 70 | Supply and Fixing in repairs vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type complete. |
| 71 | Supply and Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail. |
| 72 | Supply and Fixing Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass corner shelf with chromium plated bracket guard and railing. |
| 73 | Supply and Fixing PVC connection 15mm size with PTMT nuts of length 600mm. |
| 74 | Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 75 | Supply and Fixing Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor line complete al as specified and directed. |
| 76 | Supply and Fixing in repairs 15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. |
| 77 | Supply and Fixing in repairs 15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete. |
| 78 | Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed |
| 79 | Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed. |
| 80 | Supply and Fixing in repairs PVC waste pipe32mm dia fixed to WHB/Urinals. |
| 81 | Supply and Fixing in repairs 100mm dia CP grating with or without hole type complete all specified and directed. |
| 82 | Supply and Fixing in repairs 600mmx450mm bevelled edge mirror of selected quality glass,mounted on 6mm thick commercial plywood incl all around teak wood beading and fixed to wall complete all as specified and directed. |
| 83 | Supply and Fixing in repairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed. |
| 84 | Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed. |
| 85 | Supply and Fixing CP (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 86 | Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed. |
| 87 | Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed. |
| 88 | Dismantling Brick tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge. |
| 89 | Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed by Engineer-in-Charge. |
| 90 | Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-in-Charge. |
| 91 | Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-Charge. |
| 94 | All as per Srl Item No. 86 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused. |
| 95 | Disconnecting existing tanks 1000ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc |
| 96 | Disconnecting existing tanks 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc |
| 97 | Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including dismantling old water tanks. |
| 98 | Supply & Fixing in repairs rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore including dismantling old water tanks. |
| 99 | Dismantling boarding , any description , fixed in any position with screws. |
| 100 | Material and Labour Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 101 | Supply and fixing 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and apply a coat of distemper as required (Frame work for ceiling shall be measured and paid separately)complete all as specified and directed. |
| 102 | Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers, finials, 1 pair of decorative knobs for each curtain rod etc. |
| 103 | Supply and Fixing in repairs PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors/wall. |
| 104 | Supply and Fixing in repairs 110mm PVC (SWR) bends any radius. |
| 105 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed |
| 106 | Material and Labour for point wiring drawn in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc complete all as specified and as directed. Note : 1. Switche/socket/regulator/etc shall be measured and paid separately |
| 107 | a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way |
| 108 | b). For one three pin socket outlet 5 Amps independent board complete |
| 109 | c) For one three pin 5 Amps socket outlet on the same board with other switches |
| 110 | d) For one light point controlled by two way switch |
| 111 | All a per item No 106 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly complete. |
| 112 | Supply & fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed . |
| 113 | Supply & fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed . |
| 114 | Supply & fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed . |
| 115 | Supply & fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed |
| 116 | Supply & fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed . |
| 117 | Supply & fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed . |
| 118 | Supply and fixing ceiling rose 65X50 mm three terminals complete all as specified. |
| 119 | S&F Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed . |
| 120 | Supply and fixing in replacement of Ding Dong bell AC 230 Volts complete all as specified and directed . |
| 121 | Supply & fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted. |
| 122 | Supply & fixing in replacement for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. |
| 123 | Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 124 | Supply and fixing in replacement sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface complete all as specified. |
| 125 | Supply and fixing in replacement MCB single pole 6 to 32 Amps all as specified and directed. |
| 126 | Supply and fixing in replacement MCB DP 40 Amps 240V, 10 KA, complete all as specified and as directed |
| 127 | Supply and fixing in replacement 40 to 63 Amps MCB TPN, 415 Volt all as specified and directed. |
| 128 | Supply & fixing in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). Please Enable Macros to View BoQ information |
| 129 | Supply & fixing in replacement of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps as specified and directed (for AC and geyser). Please Enable Macros to View BoQ information |
