|
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 3 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed |
| 6 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 7 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed |
| 9 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 10 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed |
| 12 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed |
| 13 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed |
| 14 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 16 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed |
| 17 | Dismantling boarding, any description, fixed in any position with scew as in framed work etc complete all as specified and as directed |
| 18 | Material and labour for Pre-cast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 19 | Material and labour for providing cement concrete type 1:2:4 B0 (using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 20 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 21 | Material and labour for Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc complete all as specified and as directed |
| 22 | Material and labour for Brickwork (Old size Brick)with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed |
| 23 | Material and labour for Cutting chases, pinning in, making good to facingsin brick walls where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed pipe line etc. and making good, cutting exceeding 20cm girth etc complete all a specified and as directed |
| 24 | Material and labour for 18 to 20mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round etc complete all as specified and as directed |
| 25 | Supply and fix 2nd class hard wood scantling clean sawn surfaces incl a coat of creosote oil painting etc complete for grid work of wall panelling fixed with nails / Self Tapping screw in the wall etc complete all as specified and as directed |
| 26 | Supply and fix solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 27 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed. |
| 28 | Supply and fix in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed |
| 29 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 30 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed ' |
| 31 | Supply and fix aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed |
| 32 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed |
| 33 | Supply and fix 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 34 | Supply and fix in repairs Brass Chromium Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed |
| 35 | Material and labour for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 36 | Material and labour for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 37 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 38 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respective items. |
| 39 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed Note - Particle Board & Glass shall be measured and paid separately under respective items. |
| 40 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 41 | Supply and fix aluminium Powder Coating (minimum thickness of powder coating 50 micron frame in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & section of size 50 mm x 44.5mm of 16 guage of such type arrangement for fixing glass/pre-laminated board on both/one side complete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in (floor/glass/etc.) incl taking down existing wall partition incl taking down existing partition of any description etc complete all as specified and as directed Note - Glass / particle board shall be measured and paid separately under respective items. |
| 42 | Supply and fix 8 mm aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed |
| 43 | Supply and fix in repairs 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 44 | Supply and fix in repairs 7 to 8 mm Hollow Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall cladding / Vertical surface and fixing at site incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 45 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 46 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 47 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee (15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 48 | Supply and fix 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling, over 4mm thick MFD board, medium density, fibre board, single layer type or three layer type with BWR type adhesive, fixed with screws over 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed incl taking down existing boarding etc complete all as specified and as directed |
| 49 | Material and labour for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed Notes: WPC shall be measured and paid seperately under relevant item |
| 50 | Material and labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminum paint on top @ 0.10 litre/sqm incl taking down existing HP tiles or any other treatment etc complete all as specified and as direted |
| 51 | Material and labour for 75 mm thick cement concrete type 1:4:8 D- 2, (Using 40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 52 | Material and labour for cement concrete type 1:2:4 B-0 (Using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed |
| 53 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, (using 20 mm graded aggregates) as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 54 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 55 | Material and labour for Glazed ceramic tiles (Coloured) as in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed |
| 56 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 57 | All as per item no 56 avove but as in vertical surface etc complete all as specified and as directed |
| 58 | Material and labour for Virified Ceramic tiles (Drak Shade/ double Charaged/Ultra Charged ) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed |
| 59 | All as per item no 58 avove but as in vertical surface etc complete all as specified and as directed |
| 60 | Supply and fix for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 61 | Material and labour for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 62 | Material and labour for Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes etc complete all as specified and as directed |
| 63 | Material and labour for Rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed |
| 64 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 65 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 66 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 67 | Material and labour for Preparing new plastered suface of walls and applying two coats acrylic distemper white or tinted over a coat of primer etc complete all as specified and as directed |
| 68 | Material and labour for Preparing Old plastered suface of walls and applying two coats acrylic distemper , white or tinted over a coat of primer etc complete all as specified and as directed |
| 69 | Material and labour for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 70 | All as per item no 69 above but new plastered surface of wall complete all as specified and as directed |
| 71 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed |
| 72 | Supply and fix in repair 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required incl fixing arrangements, etc complete all as specified and as directed . |
| 73 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 74 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 75 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 76 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 77 | Supply and fix in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed |
| 78 | Supply and fix in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed |
| 79 | Supply and fix in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 80 | Supply and fix in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 81 | Supply and fix in repairs PVC flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed |
| 82 | Supply and fix in repairs 15 mm dia bore CP Bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed |
| 83 | Supply and fix in repairs 15 mm dia bore CP fancy type long body Stop valves/ Angle cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed |
| 84 | Supply and fix in repairs Bib Cock two way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and as directed |
| 85 | Supply and fix in repairs 15mm dai of bore Chromium plate Pillar taps Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and as directed |
| 86 | Supply and fix in 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed |
| 87 | Supply and fix in repairs Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube including making connections and fixed in position etc complete all as specified and as directed |
| 88 | Supply and fix Jet spray including fitting etc complete all as specified and as directed |
| 89 | Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and directed |
| 90 | Supply and fix in repairs acrylic Unbreakable corner shelf (3Pcs set i.e 8\\"-1, 10\\"-1 & 12\\"-1) complete all as specified and directed |
| 91 | Supply and fix in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed |
| 92 | Supply and fix in repairs CP Towel ring Brass glossy finish complete all as specified and directed |
| 93 | Supply and fix GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 94 | Supply and fix GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed |
| 95 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 96 | Supply and fix in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed. |
| 97 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 98 | Supply and fix 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 99 | Supply and fix 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 100 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 101 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 102 | Supply and fix PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed |
| 103 | Supply and fix 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed |
| 104 | Supply and fix 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed |
| 105 | Supply and fix PVC vent cowls of 75mm dia etc complete all as specified and as directed |
| 106 | Supply and fix in repairs stainless steel decorative curtain rod of 25 mm bore 0.80 mm wall thickness incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed |
| 107 | Supply and fix in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 108 | Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed |
| 109 | Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and directed |
| 110 | Material and labour Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, e-beam grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and directed |
| 111 | All as per item serial No 110 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and directed |
| 112 | All as per item serial No 110 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and directed |
| 113 | All as per item serial No 110 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and directed |
| 114 | Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) |
| 115 | Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 116 | Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 117 | Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 118 | Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as directed. |
| 119 | Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed |
| 120 | Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed |
| 121 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed. |
| 122 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 123 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed /surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 124 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 125 | Supply and fix in repair MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed |
| 126 | Supply and fix in repair MCB DB of sheet metal enclosure double door IP-43 SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed |
| 127 | Supply and fix in repair MCB DB of sheet metal enclosure double door IP-43 SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed |
| 128 | Supply and fix in repair MCCB four pole 100 A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and directed |
| 129 | Supply and fix in repair MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and directed |
| 130 | Supply and fix in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed |
| 131 | Supply and fix in repair MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed |
| 132 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed |
| 133 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed |
| 134 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 135 | Supply and fix in repair LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed |
| 136 | Material and labour for building secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed |
| 137 | Material and labour for wiring with 2 runs of 6 sqmm, single core, e-beam PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core e-beam PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 138 | Material and labour for wiring with 2 runs of 4 sqmm, single core,e-beam PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 4 sqmm single core e-beam PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. Please Enable Macros to View BoQ information |
