|
| 1 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3M in depth and as per the direction of Engineer-in-charge. |
| 2 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 3 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. |
| 4 | Cement concrete M20 Grade using 20mm & downgraded size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance, royalties of all materials with labour, cess and T&P etc. required for the work complete. |
| 5 | R.C.C. work of Grade-M20 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including hoisting, lowering, laying and compacting concrete, watering and curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, es of all materials with all labour and T&P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position. |
| 6 | Plinth Beam |
| 7 | Lintel |
| 8 | Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and es of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors (weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only manufacturing companies such as S.A.I.L. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of S.A.I.L. steel has to be produced by the contractor) |
| 9 | Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work complete in all respect. |
| 10 | Fly Ash brick masonry in cement mortar (1:6) in superstructure using fly ash bricks of 23cm x 11cm x 8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing including cost, conveyance, royalties of all materials with all labour, cess and T&P required for the work complete in all respect in all floors. |
| 11 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 12 | 12mm (½”) thick cement plaster (1:6) finished smooth to outside smooth surface of brick walls after raking out the joint including watering and curing with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect. |
| 13 | Supplying, fitting and fixing vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cment of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. |
| 14 | Fixing Glazed wall tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 15 | Supplying fitting and fixing angle iron truss / rafter / purlin made out of M.S. angle iron in roof frame including drilling holes and supplying nuts and bolts with cement concrete (1:2:4) on walls using 12mm to 20mm size black hard crusher broken granite chips (20mm size not exceeding 25%) including watering, curing, cost, conveyance royalties and taxes of all materials complete in all respect. (Payment will be made on the weight of angle iron only and the weight of nuts and bolts will not be taken into consideration). |
| 16 | Supplying, fitting and fixing colour coated durashine roofing sheet of 0.45mm (T.C.T.) x 1072 in roofing including fixing with nuts, bolts including cost, conveyance, taxes of all materials with all labour and T&P etc. complete in all respect. |
| 17 | Providing, supplying, fitting and fixing C.R. sheet shutter of 18 gauge in the prefixed doors/windows frame using M.S.angle 25mm x 25mm x 5mm for shutter frame, bracing of 25mmx6mm, M.S. flat including hoisting, placing in position & electric arc welding etc. complete including painting one coat with anti corrosive red-oxide primer cost of hard ware fittings complete in all respect. |
| 18 | Distempering two coats with brush to the wall surface with approved shade, make and quality of distemper over a coat of white washing with stone lime including cost of distemper, lime, glue and brush, conveyance, and taxes of all materials with labour with T&P required for the work etc. complete in all respect. |
| 19 | Painting two coats with any approved weather seal coat (I.S.I.) paint of approved quality shade and make over a coat of priming with water bound wall cement primer (I.S.I.) to wall surface including acrylic putty with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 20 | Providing, fitting and fixing of Armstrong accoustical fine fissured RH-99 board NRC 0.55 sound attenction 34 db suspended ceiling system with Armstrong fine fissured tiles. including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. |
| 21 | Painting two coats with any approved synthetic enamel paint of approved quality shade and make over a coat of priming to new wood work / iron work including cost of the primer and paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. Please Enable Macros to View BoQ information |
