|
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing and levelling the bed and depositing the excavated materials away from the work site initial lead of 50m and initial lift of 1.5m including cost of all labour and T&P required for the work etc complete as directed by the Engineer in charge. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost,conveyance,royality and all other T&P etc.complete. |
| 3 | Cement concrete (1:3:6)with 4Cm.size hard granite metal in foundation including watering, curing, cost, conveyance, royality and all taxes etc.complete. |
| 4 | Providing with M-20 grade for R.C.C. work using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete. |
| 5 | Column base |
| 6 | Column |
| 7 | Plinth Beam |
| 8 | Lintel bend |
| 9 | Chajja |
| 10 | Roof slab |
| 11 | Kitchen slab/Drain slab |
| 12 | Providing,straightening,cutting bending,binding and tying of MS/TS rods in proper place and position including all cost and labour etc;complete. |
| 13 | Fly ash Brick masonary in cement mortar(1:6) using 23cm x 11cm x 8cm size fly ash bricks and watering curing including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 14 | In Foundation & plinth |
| 15 | In superstructure |
| 16 | 16mm thick cement plaster in C.M.(1:6) over bricks wall surface including racking out joints and watering curing including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 17 | 12mm thick cement plaster in C.M.(1:6) over bricks wall surface including racking out joints and watering curing including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 18 | 6mm thick cement plaster in C.M.(1:4) below roof slab for ceiling plaster and watering curing including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 19 | UPVC windows & Ventilators – Providing, supplying and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 6mm Glazing, hardware hinges and fitting etc. |
| 20 | Providing fitting, fixing of PVC door with frame including all cost of labour, T&P, hire charges of drilling machine, labour charges etc complete. |
| 21 | Providing, supplying, fitting and fixing of M.S Door with framed choukaths including all cost and labour etc; complete. |
| 22 | Providing, supplying and fixing floor tiles in floor treads on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete. |
| 23 | Vetrified tiles(600X600mm Plain) |
| 24 | Vitrified industrial floor Tile of premium grade having thickness 8mm to 10mm conforming to IS 4457 of size 300mmx300m |
| 25 | Granite above 0.40 sqm (20mm thic) |
| 26 | Supplying, fitting and fixing wall tiles for dadoos laid on 12 mm thick cement mortar (1:3) (1 cement :3 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. |
| 27 | Vetrified tiles(600X600mm Plain) |
| 28 | Ceramic Wall tiles (30x30cm/40cmx40cm) |
| 29 | 2.5cm thick grading concrete (1:2:2) on roof slab with 4.7mm size hard granite chips. including cost, conveyance and taxes of all materials with cost of labour and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 30 | Distermpering two coats over one coat of wall primer of approved shade including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 31 | Finishing wall surface with water proofing weather coat paint two coats over one coat of wall primer of approved shade including all cost, conveyance, royality and all labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 32 | Painting two coats with synthetic enamel paint including all cost, conveyance, labour and T&P required for the work etc; complete as per specification and direction of the Engineer in charge. |
| 33 | Backfilling in F&P with excavated materials including watering and ramming as directed by the Engineer-in-Charge. |
| 34 | Conveyance of excavated earth 5Km. away from the work site by mechanical means etc complete as per direction of E.I.C. |
| 35 | E.I WORK |
| 36 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. GROUP-A |
| 37 | GROUP-B |
| 38 | GROUP-C |
| 39 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. |
| 40 | Supply and fixing of 1 no of 5A switch and 1 no. Of 5A socket outlet piano type ISI marked on existing switch board including all connections and acceessories as reuired. |
| 41 | Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required. |
| 42 | Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge. 2x1.5 + 1x1.5 in 20mm dia PVC Pipe |
| 43 | 2x2.5 + 1x1.5 in 20mm dia PVC Pipe |
| 44 | 2x4 + 1x1.5 in 20mm dia PVC Pipe |
| 45 | 4X6sq.mm+2X2.5sq.mm |
| 46 | 1x1.5 mm2 for inverter wiring |
| 47 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Siemens/Schneider/Legrand/Eq. |
| 48 | 6-32A DP MCB |
| 49 | 40A FP MCB |
| 50 | 63A FP MCB |
| 51 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) Make-Siemens/Schneider/Legrand/Eq. 6(8+18) Way TPN Double Door Distribution Box |
| 52 | Supplying and fixing step regulator electronic type on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge. |
| 53 | S/F. Of 48\\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 54 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 55 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 56 | Supply and fixing of 63 Amp 3-Ph Main Switch (Make of Legrand/Hager/ scheinder / Siemens ) |
| 57 | S/F of Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs.(Make-Havells/Philips/Crompton) |
| 58 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 59 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 60 | Supplying and fixing batten holder / BK angle holder in place of Ceiling Rose ISI marked including connection etc. as required. |
| 61 | Supply of 10 sq mm 4 core XLPE insulated Aluminium UnArmoured cables ISI marked.(make-Havells/Polycab/KEI/Equivalent) |
| 62 | P.H. WORK |
| 63 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 64 | 25mm dia PVC ASTM pipe (sch-80) |
| 65 | 32mm dia PVC ASTM pipe (sch-80) |
| 66 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 67 | 1000 liters capacity PVC water storage tank |
| 68 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 69 | 22” x 16” pedestal |
| 70 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 71 | 25mmx600mm long CP towel rail |
| 72 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 73 | 600mmx450mm size B.E mirror (swivelled type) |
| 74 | Ext. S/D Portion |
| 75 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
