|
| 1 | Earth work excavation of foundation in hard soil with in initial lead and lift including rough dressing and breaking clods etc complete as per the specification and direction of the E.I.C. |
| 2 | Filling foundation and plinth with sand including watering and ramming with all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 3 | Providing Cement Concrete (1:3:6) using 40 mm size C.B.H.G metal in foundation and floor including all cost conveyance royality labour and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 4 | RCC M-20 in following items having minimum compressive strength 200 kg sqm inn 15x15x15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12 mm size C.B.H.G Chips etc. complete as per the specification and direction of the E.I.C. |
| 5 | Footing |
| 6 | Plinth/Grade Beam |
| 7 | Column |
| 8 | Column |
| 9 | Lintel Bend |
| 10 | Chajja |
| 11 | All Kinds of Beam |
| 12 | All kind of Beam |
| 13 | Stair Case |
| 14 | Roof Slab |
| 15 | Roof Slab |
| 16 | Providing Steel Reinforcement to RCC works including cutting bending binding weling and joining if necessary and tying the grills and placing in position as required for RCC work as per the direction of E.I.C. |
| 17 | Ground Floor |
| 18 | First Floor |
| 19 | Fly Ash Brick masonary with Cement Mortar (1:6) in Foundation and Plinth of size 23x11x8 cm having C.S not less than 75 Kg/cm2 including all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 20 | Fly Ash Brick masonary with Cement Mortar (1:6) in Super Structure using Fly Ash Brick of size 23x11x8 cm having C.S not less than 75 Kg/cm2 including all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 21 | Ground Floor |
| 22 | First Floor |
| 23 | 12mm thick C.P. in C.M.(1:6) to the smooth out side surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 24 | Ground Floor |
| 25 | First Floor |
| 26 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | 6mm thick cement plaster (1:4) to CC surface including osed deep Chipping and cleaning to C.C. |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Finishing plastered surfaces of walls with cement putty (water based) of approved make of (J.K wall putty, Birla white, Narolac) and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 33 | Ground Floor |
| 34 | First Floor |
| 35 | Supplying, fitting and fixing tile in floors of size 300mm x 300mm of approved make ( Somany, Nitco, Kajeria, Johnson) confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge. |
| 36 | Industrial Vetrified Tile (30x30)cm |
| 37 | Vetrifed tile (Premium Grade 600 x 600 mm) |
| 38 | Granite tile |
| 39 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc with approved make ( Somany, Nitco, Kajeria, Johnson) . complete.as per the specification and direction of the E.I.C. |
| 40 | Vetrifed tile (Premium Grade 600 x 600 mm) |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size- 65*125 mm(DAR Cl. 26.86.6) |
| 42 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 43 | Supplying ,fitting and fixing of 32 mm thick flush door shutter with approved quality of 30 mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fitttings and fixtures etc.complete. |
| 44 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter /Window Shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)35 mm thick (CPWD Cl. 26.87.2) |
| 45 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 46 | Supplying, fitting, fixing up window (sliding type) -2 TRACK & louvers type made up UPVC section as window frame shutter frame with 6mm thick clear glass(one side visible) as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C (FENESTA / NCL VEKA LTD ) |
| 47 | Providing and fixing Iron Grill Gate including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete as per the specification and direction of the E.I.C. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Supplying, fitting& fixing of Iron door including all cost etc.Complete as per the specification and direction of the E.I.C. |
| 51 | First Floor |
| 52 | Painting two coats with any approved synthetic enamel paint of approved (Asian, Narolac, Berger ) quality shade to wood work / iron work including cost of the paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 53 | Ground Floor |
| 54 | First Floor |
| 55 | Painting 2 coats with Weather coat paints with one coat of primer of approved (Asian, Narolac, Berger ) shade by means of brush to outside surface of walls after cleaning the surface including cost of weather coat with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer-in-charge. |
| 56 | Ground Floor |
| 57 | First Floor |
| 58 | Plastic Emulsion Paint two coats with brush over a coat of wall primer to the wall surface with approved (Asian, Narolac, Berger ) shade, make and quality of distemper including cost of distemper, primer and brush, conveyance, and taxes of all materials with labour with T&P required for the work etc. complete in all respect as per the specification and direction of the E.I.C. |
| 59 | Ground Floor |
| 60 | First Floor |
| 61 | 2.5cm (1”) av. thick grading concrete (1:2:2) using 6mm size black hard crusher broken granite chips over roof slab after chipping and chiseling the same and cleaning the surface by brushing laid to proper slope finished smooth to receive tarfelt treatment watering and curing including cost, conveyance, royalties and taxes of all materials with all labour and T&P etc. required for the work complete in all respect in all floors complete as per the direction of the Engineer-In-Charge. |
| 62 | Providing fitting, fixing of Concrete Paver Block on the road surface in floors of Approved Specification. Data for 10 Sqm (60mm Thick) |
| 63 | E.I. Work |
| 64 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. GROUP-A |
| 65 | GROUP-B |
| 66 | GROUP-C |
| 67 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. |
| 68 | Supply and fixing of 1 no of 5A switch and 1 no. Of 5A socket outlet piano type ISI marked on existing switch board including all connections and acceessories as reuired. |
| 69 | Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required. |
| 70 | Supply and Fixing of Multipurpose board consisting of 1 no of 5A switch and 1 no. Of 5A Socket outlet and 1 no of 15A switch and 1 no. Of 15A Socket outlet piano type ISI marked including all connections and accessories as required. |
| 71 | Supplying and fixing of computer board consisting of 3 nos 6 Amp Plug point 3 nos switch,Piano type with all connections and accessories as required. |
| 72 | Supplying and fixing AC point consisting of 15A socket outlet Piano type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. |
| 73 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of as required as per direction of Engg.-in-Charge |
| 74 | Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge. 2x1.5 + 1x1.5 in 20mm dia PVC Pipe |
| 75 | 2x2.5 + 1x1.5 in 20mm dia PVC Pipe |
| 76 | 2x4 + 1x1.5 in 20mm dia PVC Pipe |
| 77 | 2x6+ 1x2.5 in 25mm dia PVC Pipe |
| 78 | 1x1.5 mm2 for inverter wiring |
| 79 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Siemens/Schneider/Legrand/Eq. |
| 80 | 25A DP MCB |
| 81 | 32A DP MCB |
| 82 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) Make-Siemens/Schneider/Legrand/Eq. 12 Way Double Door |
| 83 | Supplying and fixing step regulator electronic type on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge. |
| 84 | S/F. Of 48\\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 85 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 86 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 87 | S/F of 63A ICDP Main Switch of Havells/Anchor/HPL/L&T/Equivalent make. Including all coneections and accessories as required. |
| 88 | Supply and Installation of 2000 VA sine wave UPS including all connetion and accessories |
| 89 | Supply and instalation of 150 AH tubular battery including all connections and accessories |
| 90 | Supply and Installation of stand for double battery |
| 91 | S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 92 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 93 | S/F of Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs.(Make-Havells/Philips/Crompton) |
| 94 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 95 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 96 | Supplying and fixing batten holder / BK angle holder in place of Ceiling Rose ISI marked including connection etc. as required. |
| 97 | P.H. Works |
| 98 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 99 | 25mm dia PVC ASTM pipe (sch-80) |
| 100 | 32mm dia PVC ASTM pipe (sch-80) |
| 101 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 102 | 15mm dia CP angle stop cock (FLR-ACR-5053N) |
| 103 | 15mm dia CP two in one bib cock (FLR-ACR-5041N) |
| 104 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 105 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 106 | 25mm dia brass full way valve (Shakti make) |
| 107 | 32mm dia brass full way valve (Shakti make) |
| 108 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 109 | 125mm CP grating |
| 110 | 15mm size C.P. flange |
| 111 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 112 | 1000 liters capacity PVC water storage tank |
| 113 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 114 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 115 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 116 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 117 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 118 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 119 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 120 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 121 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 122 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 123 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 124 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 125 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 126 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 127 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 128 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 129 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 130 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 131 | European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 132 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 133 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 134 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 135 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 136 | 25mmx600mm long CP towel rail |
| 137 | Towel ring |
| 138 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 139 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 140 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 141 | 600mmx450mm size B.E mirror (swivelled type) |
| 142 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 143 | CP soap holder |
| 144 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 145 | ½” x 5” CP Shower (Jaquar Make) |
| 146 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge |
| 147 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 148 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 149 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 150 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 151 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ) |
| 152 | Kajaria tile 60cmx120cm |
| 153 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 154 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 155 | Kajaria tile 60cmx120cm |
| 156 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 157 | Ext. S/D Portion |
| 158 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 159 | 100mm dia P.V.C. pipe |
| 160 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 161 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 162 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 163 | 1 no 10 Users Septic tank |
| 164 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 165 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 166 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 167 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 168 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 169 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 170 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 171 | RCC floor, roof slab chhaja up to 4.430 m height |
| 172 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly ash Bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 173 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 174 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 175 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
