|
| 1 | Earth work excavation of foundation in hard soil with in initial lead and lift including rough dressing and breaking clods etc complete as per the specification and direction of the E.I.C. |
| 2 | Filling foundation and plinth with sand including watering and ramming with all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 3 | Providing Cement Concrete (1:3:6) using 40 mm size C.B.H.G metal in foundation and floor including all cost conveyance royality labour and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 4 | RCC M-20 in following items having minimum compressive strength 200 kg sqm inn 15x15x15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12 mm size C.B.H.G Chips etc. complete as per the specification and direction of the E.I.C. |
| 5 | Plinth/ Grade Beam |
| 6 | Lintel Bend |
| 7 | Chajja |
| 8 | Roof Slab |
| 9 | Providing Steel Reinforcement to RCC works including cutting bending binding weling and joining if necessary and tying the grills and placing in position as required for RCC work as per the direction of E.I.C. |
| 10 | Fly Ash Brick masonary with Cement Mortar (1:6) in Foundation and Plinth of size 23x11x8 cm having C.S not less than 75 Kg/cm2 including all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 11 | Brick masonary with Cement Mortar (1:6) in Super Structure using Fly Ash Brick of size 23x11x8 cm having C.S not less than 75 Kg/cm2 including all cost conveyance royality and T&P materials required for the work etc. complete as per the specification and direction of the E.I.C. |
| 12 | 12mm thick C.P. in C.M.(1:6) to the smooth out side surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 13 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 14 | Supplying, fitting and fixing tile in floors of size 300mm x 300mm of approved make ( Somany, Nitco, Kajeria, Johnson) confirming to IS 13755 laid on 20 mm thick cement mortar (1:4) (1 cement:4 course sand) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-Charge. |
| 15 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry etc with approved make ( Somany, Nitco, Kajeria, Johnson) . complete.as per the specification and direction of the E.I.C. |
| 16 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. |
| 17 | ACP sheet |
| 18 | Supplying, fitting, fixing up window (sliding type) -2 TRACK & louvers type made up UPVC section as window frame shutter frame with 6mm thick clear glass(one side visible) as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes of labour, T&P etc. complete asper direction of E.I.C (FENESTA / NCL VEKA LTD ) |
| 19 | Providing and fixing Iron Grill Gate including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete as per the specification and direction of the E.I.C. |
| 20 | Providing and fixing Iron Door Shutters with Angle Iron Frames including fixing of Hold Fasts, Aldrops, Hinges etc. all complete including fixing with C.C. (1:2:4) complete. |
| 21 | Painting two coats with any approved synthetic enamel paint of approved (Asian, Narolac, Berger ) quality shade to wood work / iron work including cost of the paint, sand papering polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect. |
| 22 | Painting 2 coats with Weather coat paints with one coat of primer of approved (Asian, Narolac, Berger ) shade by means of brush to outside surface of walls after cleaning the surface including cost of weather coat with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer-in-charge. |
| 23 | Distempering two coats with brush over a coat of wall primer to the wall surface with approved (Asian, Narolac, Berger ) shade, make and quality of distemper including cost of distemper, primer and brush, conveyance, and taxes of all materials with labour with T&P required for the work etc. complete in all respect as per the specification and direction of the E.I.C. |
| 24 | E.I. WORK |
| 25 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. GROUP-A |
| 26 | GROUP-B |
| 27 | GROUP-C |
| 28 | Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch , phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. |
| 29 | Supply and fixing of 1 no of 5A switch and 1 no. Of 5A socket outlet piano type ISI marked on existing switch board including all connections and acceessories as reuired. |
| 30 | Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 15 / 16 amps socket outlet and 15 / 16 amps piano type switch, connection, painting etc as required. |
| 31 | Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge. 2x1.5 + 1x1.5 in 20mm dia PVC Pipe |
| 32 | 2x2.5 + 1x1.5 in 20mm dia PVC Pipe |
| 33 | 2x4 + 1x1.5 in 20mm dia PVC Pipe |
| 34 | 4X6sq.mm+2X2.5sq.mm |
| 35 | 1x1.5 mm2 for inverter wiring |
| 36 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Siemens/Schneider/Legrand/Eq. |
| 37 | 6-32A DP MCB |
| 38 | 40A FP MCB |
| 39 | 63A FP MCB |
| 40 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) Make-Siemens/Schneider/Legrand/Eq. 6(8+18) Way TPN Double Door Distribution Box |
| 41 | Supplying and fixing step regulator electronic type on the existing switch box including connections but excluding box etc. as required as per direction of Engg.-in-Charge. |
| 42 | S/F. Of 48\\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 43 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 44 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 45 | Supply and fixing of 63 Amp 3-Ph Main Switch (Make of Legrand/Hager/ scheinder / Siemens ) |
| 46 | S/F of Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs.(Make-Havells/Philips/Crompton) |
| 47 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required. |
| 48 | Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 49 | Supplying and fixing batten holder / BK angle holder in place of Ceiling Rose ISI marked including connection etc. as required. |
| 50 | Supply of 10 sq mm 4 core XLPE insulated Aluminium UnArmoured cables ISI marked.(make-Havells/Polycab/KEI/Equivalent) |
| 51 | P.H WORK |
| 52 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 53 | 25mm dia PVC ASTM pipe (sch-80) |
| 54 | 32mm dia PVC ASTM pipe (sch-80) |
| 55 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge |
| 56 | 1000 liters capacity PVC water storage tank |
| 57 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 58 | 22” x 16” pedestal |
| 59 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 60 | 25mmx600mm long CP towel rail |
| 61 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 62 | 600mmx450mm size B.E mirror (swivelled type) |
| 63 | Ext. S/D Portion |
| 64 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
