Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling brick or stone masonry in lime or cement mortar under 3. m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 2 | Dismantling & removing doors, windows, & ventilator including removal of frame, hinges, fastening & stacking the same for reuse and rmoving the debris with in 50. m Lead etc complete. |
| 3 | Dismantling & removing 2.5 cm thick A.S.flooring including stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 4 | Dismanteling & removing old tile cladding from walls including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 5 | Dismanteling & removing old tile cladding from walls including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 6 | Dismanteling & removing RCC chajja, shelves, fins and parapets including stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 7 | Dismanteling & removing ACP Pannel from facade including raking out joints 12 mm deep stacking the useful materials for reuse and removing the debris with in 50. m Lead. |
| 8 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep & removing the debris with in 50. m Lead. (Inside Wall) |
| 9 | Ground Floor |
| 10 | First Floor |
| 11 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 5m height.(Wall) |
| 12 | Below 5m Height |
| 13 | Door & Window |
| 14 | Above 5m Height |
| 15 | Door & Window |
| 16 | Fly Ash brick masonry in C.M. (1:6) using Fly Ash bricks of 23cm x 11cm x 8cm. Size having crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use in superstructure including splays cutting, moulding, corbelling, champhering, watering and curing including cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work complete as directed by the Engineer in charge. |
| 17 | 16mm thick cement plaster in cement mortar (1:6) finishing smooth to smooth surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 18 | Ground Floor |
| 19 | First Floor |
| 20 | 12mm thick cement plaster in cement mortar (1:6) with finished smooth to brick walls in dados & skirting after raking out the joints including watering and curing complete with cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries and T&P. etc. required for the work complete as directed by the Engineer in charge. |
| 21 | 6mm thick cement plaster to ceiling in cement mortar (1:4) including closed deep chipping with slurry treatment to the R.C.C. surfaces finished smooth including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 22 | Priming one coat to wall surface with water bound wall primer of any approved quality and shade in all floors at all height including sand papering and making the surface smooth with cost, conveyance and taxes of all materials, cost of all labour, sundries and T&P. etc. required for the work complete. |
| 23 | Ground Floor |
| 24 | First Floor |
| 25 | Priming one coat to wall surface with water bound wall primer of any approved quality and shade in all floors at all height including sand papering and making the surface smooth with cost, conveyance and taxes of all materials, cost of all labour, sundries and T&P. etc. required for the work complete. |
| 26 | Finishing wall surface of walls with Groove textured finish (2 to 2.5mm thick) of approved make and finished rough surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete . |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | Wall Painting Two coats with approved Plastic Emulsion Paint on walls including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. |
| 33 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter.ThE scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measured for payment purpos (2) The payment will be made once only for execution of all items for such works(CPWD DAR-2021 Item No: 24.2) |
| 34 | Supplying, fitting and fixing vitrified tile 600x600mm of approved make confirming to IS : 13755 with application of polymer modified quick set cement based water resistant adhesive confirming to IS:15477 of 3mm thick bed and filling joints with spacer bar & 4mm epoxy grout of approved quality including cost of all materials, labour T & P etc required for the work |
| 35 | First Floor |
| 36 | Supplying, fitting and fixing of vitrified tiles on dadoos of approved quality (conforming to IS 13757), shade and 600 x 600mm thick size fixed on 20mm thick cement plaster (1:4) & filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work. |
| 37 | First Floor |
| 38 | Manufacturing, Providing & Installation of GFRC JALI (Glass Fiber Reinforced Concrete) of thickness of 25 mm & border thickness of 50 mm with Pattern, design, and colour of approved make to be fixed on/between RCC/Block work Column or structural work with Dry Fixing method with appropriate SS Pipe & Cleats frame work, usingfasteners, and necessary hardware etc.The element shall be made from '53 grade' Portland Cement or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning or equivalent,Super plasticizers / Additives make by 'BASF or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments or equivalent. The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ Reckli' or equivalent. |
| 39 | Providing,painting two Coats of approved shade of PU enamel paint of BERGER/ASIAN/DULUX make as approved by Consultant over one coat of Red Oxid primer on new iron work finished smooth including all cost,conveyance, taxes,sundries,T&P and all labour etc, complete as per direction of engineer in charge. |
| 40 | Dormakaba automatic Sliding door operator ES 250 PRO Easy 4150 mm with low-noise drive motor without gearbox, TÜV design tested for 1.5 Million Cycle of operation in accordance with low voltage guidelines of IEC /EN 60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards. With the clear passage width up to 2000 mm. The Profile Finish should be Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm. Drive with acoustically decoupled and exchangeable running rail and wear-resistant special surface. Rollers made of special plastic, Counter rollers as derailment protection. Mounting plate with prefabricated fixing holes and threaded holes. |
| 41 | Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time 0- 180 Sec, with smps, Class of protection IP 20.Program Switch with Knob, ES 250 PRO Easy, Maximum Panel Weight Carrying Capacity of 2X 125 Kgs & 1X 125 kgs each leaf. The Max. opening and closing force by the operator should not exceed 150N and maximum power consumption should not exceed 130W during operation mode. The operator should be equipped Nemo Combi sensor with 2x Microwave for activation and double rows of 24 spots failsafe Safety infrared curtains without the need of Photocell. The system shall have constant power supply 230V+ 5%, 50Hz, AC. |
| 42 | Supplying and fixing of Roman blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 1 mm thick fabric with lining of approved design and quality etc. complete. |
| 43 | Supply & installation of Main Curtains & Sheer Curtains with Lining on Main & Tailoring Charges. |
| 44 | Providing and fixing internal wall panets on Light gruge steel frame gypsum plaster board conforming 15 2995:2011 fixed on cement board as per standard sizes fixed with self-drilling/taping screws/fasteners 60cm 60cm cic các of approved make, Screws b head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying epoxy from 25 to 45 mm. Proper per taping and jointing to be done using fiber mesh tape and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately 243.1 Cement Fiber Board 8 mm thick Steam Cured) Type B, Category Ill as per 15 14862:2000 (High pressure Steam Cured) (DAR-Cl.26.43 Pg. 2031 ) |
| 45 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(45mm X 85mm) (DAR-Cl.26.86.6 Pg. 2035 ) |
| 46 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener.CPWD DAR-14.3 |
| 47 | Providing and fixing of WPC lipping of different size in wall ,door and windows Pelmet, Chaukatha etc of different size in wall ,door and windows etc including all cost complete as per the instruction of Engineer - in -Charge.CPWD DAR-9.45 |
| 48 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete |
| 49 | Providing,Mural painting of approved shade of Veer Surendra Sai over wall including all cost,conveyance, taxes,sundries,T&P and all labour etc, complete as per direction of engineer in charge. |
| 50 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. |
| 51 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Exterior stone Veaner laminate , with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc, including:DAR V-I,P No.455,Sl No.8.32. |
| 52 | a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. |
| 53 | (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel. cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral(Stonelam) core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. |
| 54 | (c) The fastening brackets of Aluminium alloy 6005 T5/MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. |
| 55 | Base frame work for ACP cladding is payable under the relevant aluminium Item.s The Contractor shall provide curtain wall with aluminium composite panel cladding. having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm, up to two decimal places. |
| 56 | Supply and installation of Stretch wall fabric system by using FR Grade acoustic fabric of size 1700mm width, shall be stretched by using wooden base 12.5 mm thick, rigid vinyl Stretch Tracks half wrap/full wrap 12.5mm and Midseam 12.5mm, Strand wood wool board , Infills polyester fibre infill with requisite accessories & tools. Wooden base 12mm is first installed on the wood fibre along the marking lines with metal fasteners inserted at 300mm centres. 12.5 mm tracks to be installed on wooden base, after applying Stick adhesive on both surfaces for a true and continuous secure grip, and heavy-duty fasteners at 150mm centers on one/both sides of Stretch Tracks. The GI strut system includes GI Cross channel having thickness 0.45mm, length 3600mm, knur led web 40mm, depth 25mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centres. |
| 57 | Strand Wood Wool Board is square edge magnesite bonded pinewood fibre panels of size 600x1200x25mm having density 400kg/m3, weight 4kg which is fixed to Cross Channel 25mm. Long edge of panels should be perpendicular to length of Cross Channel , Infills polyester fibre infill 1000gsm 25mm thick adhered on Strand Wood Wool Board panel by using adhesive. Fabric of width 1700mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1600mm. Technical Parameters: • Core – Pine wood fibre & Poly fibre • Fire – Class A • Acoustics – NRC 0.90 • Climate (OC RH) – 55, 90 • Termite resistance – Yes • Light reflectance – Colour dependent • Green (RC %) – Low, 10 inatallation as per direction of EIC.(Make-Armstrong/Hunter Douglus/Anutone) |
| 58 | Providing & Fixing of Louvers panelling made out of 19mm thick BWP plywood with 2\\" batten as support in Horizontal and Vertical Member Placed @ 600 mm C/C and 12mm thick wpc Louvers sheet , All exposed edges should be covered with 1mm thick decorate laminate, including cost of all materials, Labour T&P etc as per direction of Engineer-In-Charge. (Louvers Panel sould be pre approved by Engineer-In-Charge) |
| 59 | Providing and Fixing of wall paper of aesthetic design and good quality etc. including cost of all labour, T&P, lead etc. complete as per direction of Engineer in Charge. |
| 60 | Engagement of labour for cleaning debries including cost of all labour,T&P required for the work etc complete |
| 61 | Engagement of SEMI SKILLED LABOUR labour for MINOR WORK including cost of all labour,T&P required for the work etc complete |
| 62 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018. |
| 63 | Providing and supplying a high back chair with ergonomic design, comfortable & aesthetically appealing. The seat and back shall be made of 18mm thick hot pressed BWP plywood padded with high resilience polyurethane foam 50mm thick having density 40kg/m³ in seat and 40mm thick having density 32kg/m³ in back. The same shall be upholstered with leatherite tapestry 0.8mm thick and 535 GSM. The backrest shall be made by keeping the natural curvature of the spine which helps to provide lumbar support. The chair shall be supplied with PP arm with cushion having leatherite covering top pivot joint with back. For seating durability the chair shall have knee tilt 360 degree revolving mechanism having four position locking and tilt tension adjustment with anti-shock feature which provides back strength for the chair. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 65mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged Polypropylene base with chrome having pitch circle dia. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be injection moulded in black 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 510±10 mm(D) X 570±10 mm(W) and back size shall be 550±10 mm(W) X 670±10 mm(H) from seat. Overall height shall be = 1130±10 mm, overall depth = 690±10 mm & overall width = 700±10 mm. Make- Godrej/featherlite/Geeken/wipro |
| 64 | Providing and supplying mid back chair with ergonomic design, comfortable & aesthetically appealing. The seat shall be made of 18mm thick hot pressed commercial plywood upholstered with high resilience moulded polyurethane foam 50mm thick having density 40kg/m³ with foam net tapestry 0.9mm thick and 300 GSM and the back shall be made of injection moulded polypropylene net cover upholstered with breathable mesh tapestry. The backrest of the chair shall be made by keeping the natural curvature of the spine with adjustable lumbar support. The chair shall be supplied with injection moulded PU adjustable arm completely joint with seat. For seating durability the chair shall have ACTICE BIO-SYNCHRO mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1-2011 standards. The Pedestal should have five legged made of die cast aluminium having pitch circle dia.. 700 mm fitted with 5 nos. twin wheel castors. The castors of the chair should beinjection moulded in 30% glass filled nylon, confirming to ANSI/BIFMA standards X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 520±10 mm(W) X 500±10 mm(D) and back size shall be 495±10 mm(W) X 750±10(H) from seat & overall height = 1050±10 mm. Make- Godrej/featherlite/Geeken/wipro |
| 65 | Providing and fixing of design table with cupboard consisting of BWR Ply Wood (ISI) with decorative laminate including all type of fittings such as handle, Lock, chain, magnet, channel, screw, bolt & nuts etc. and jointing finishing to a flush finish bonded with adhesives etc. |
| 66 | LANDSCAPE |
| 67 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 68 | Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment). |
| 69 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
| 70 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 71 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 72 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 73 | Filling of the polyurethane bags by mixture of good earth and manure in the ratio of 2:1 (2 patrt of good earth and 1 part of the cow dung manure) and placing the same of appropriate place (the good earth & cow dung manure polyurethene bags will be provided by the department) all complete as per direction of the Officer-in-charge.polyurethene bags size 30 cm dia X 30 cm height |
| 74 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. |
| 75 | Providing and Displaying Dahlia single in different colour with fresh & healthy foliage well developed with 6 to 8 half blooming buds in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 76 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 77 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. GROUP-A |
| 78 | GROUP-B |
| 79 | GROUP-C |
| 80 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 81 | Supplying,fixing of 3x6A+1X1 6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) ( (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate (both side)(anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand( ( Myrius-NEXT GEN)) /Panasonic (vision) (For equipement power). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 82 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 83 | Supplying and fixing AC point consisting of 16A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge.(Make-Schneider/Siemens/Legrand)(For Split AC) |
| 84 | Receass wiring for circuit/submain wiring with the following mentioned size PVC insulated, copper conductor, single core cable or any other equivallent reputed make ISI marked as approved, in recessed PVC conduit Heavy duty of mentioned size or any other equivallent reputed make ISI marked as approved) as required as per direction of Engg.-in-Charge. 2x1.5 + 1x1.5 in 20mm dia PVC Pipe |
| 85 | 2x2.5 + 1x1.5 in 20mm dia PVC Pipe |
| 86 | 2x4 + 1x1.5 in 20mm dia PVC Pipe |
| 87 | 2x6+ 1x2.5 in 25mm dia PVC Pipe |
| 88 | 4x10+ 2x4 in 32mm dia PVC Pipe |
| 89 | 1x1.5 mm2 for inverter wiring |
| 90 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Make-Siemens/Schneider/Legrand/Eq. |
| 91 | 6-32A DP MCB |
| 92 | 40A DP MCB |
| 93 | 63A FP MCB |
| 94 | Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR) Make-Siemens/Schneider/Legrand/Eq. 6(8+18) Way TPN Double Door Distribution Box |
| 95 | 12 Way Double Door |
| 96 | S/F. Of 48\\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make. |
| 97 | Supply and fixing of 5 stepped type Modular fan regulator(Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision)) |
| 98 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep (Make-Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 99 | S/F. Of 400mm High Speed Wall fans including all connections and accessories of Usha/Orient/Havells/Equivalent make |
| 100 | Supplying and fixing batten holder / BK angle holder in place of Ceiling Rose ISI marked including connection etc. as required. |
| 101 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of as required as per direction of Engg.-in-Charge |
| 102 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 103 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 104 | S/F of Round flush mounted ceilling Chandelier Lights with K9 crystal Chandelier for entrance(with bulb).(Make-Havells/Philips/Jaquar/Crompton/Equivalent) |
| 105 | S/F of 12Watt profile light separate electronic driver.(Make-Havells/Crompton/Philips/Bajaj) |
| 106 | S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty) |
| 107 | Supply , installation, testing and commisioning of 1.5 TR high wall 5 star inverter type split A.C machine (BTU/Hr-18000)with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi) |
| 108 | Supply, , installation, testing and commisioning of 2.0 TR high wall 5 star inverter type split A.C machine (BTU/Hr-21000-24000) with copper condensor & evaporator having ambient temperature 52 degree celcius with comprehensive 1 year warranty,5 years warranty on PCB, 5 years warranty on compressor (Make:O-General/Diakin/Mitsubishi/Hitachi) |
| 109 | S/F of 5KVA Voltage stabilizer (90V - 300V) ISI Marked. (Make:- V-Guard/MICRO-TECH). |
| 110 | S/F of 4KVA Voltage stabilizer (90V - 300V) ISI Marked. (Make:- V-Guard/MICRO-TECH). |
| 111 | Supply,installation of hard/soft copper refrigerant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 112 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job. 25mm nom. Dia pipe |
| 113 | Supply,installation & fabrication of MS base frame for both indoor and outdoor unit and other nesessary material to complete the job. 1 TR to 3 TR high wall split A.C |
| 114 | S/F of 6 W IP 65 rated inverter Pyramid Tripod type LED Bollard woth soft 360 deg light distribution.(Make-Philips/havells/Crompton/Equivalent) |
| 115 | Supply of 6 sq mm 2 core XLPE insulated Aluminium Armoured cables ISI marked.(make-Havells/Polycab/KEI/Equivalent) |
| 116 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade ofsize not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protectivecovering and refilling the trench etc. as required. |
| 117 | Shifting , Repairing & Reinstallation of existing Panel Board. |
| 118 | SITC of 65\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/Samsung/Sony |
| 119 | Supply & Laying of Cat6 23Awg UTP Cable, through existing conduit, Make: Legrand/Systimax/Panduit/D-link |
| 120 | Supplying and fixing of following sizes of PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/BEC/Precision/Norpak/Kinjal.(Only for data, telephone, CCTV) 20 mm |
| 121 | Supply of 4 Mega Pixel(MP) Bullet Camera ISI marked including all connections and accessories as required.(Make : CP Plus/Hikvision/Equivalent) |
| 122 | Supply , Installation, testing , commissioning of 32 Channel NVR with 4 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS).STQC compliant Make-Honeywell series 35/Pelco/Axis |
| 123 | Supply & Installation 10 TB Surveillence Hardisk.Make: Seagate/WD/Toshiba |
| 124 | Supply, Installation,Testing & Commisioning of wireless mouse. |
| 125 | Supply, Installation,Testing & Commisioning of 5Mtr HDMI cable. Make : Hifocus |
| 126 | Supply and installation of 16 Port Layer2 Giga (10/100/1000BaseT) PoE Switch with 4 x 1Gig SFP Port , Switching Capacity 56 Gbps, Throughput 41.7 Mpps ,Management Port 1 x RJ 45 Console port ,PoE power budget 370 Watt, Switch should support IEEE 802.3af & IEEE 802.3at standard ,MAC Address 16K , Jumbo Frame 12K ,Temperature Working 0°C~50°C, storage -40°C~70°C, Power Supply AC: 100~240VAC.Digisol Model No. DG-GS1528HPE-P/Cisco/HP |
| 127 | Supply and installation of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/Rittal/ APW |
| 128 | Supplying all materials,labour,T&P and dismantling the damaged European water closet or Anglo Indian water closet and removing the debris at a safe distance as per direction of the Engineer in charge |
| 129 | Existing |
| 130 | Supplying all materials,labour,T&P and dismantling the damaged squatting type water closet and urinal plates etc and mending good the damages to the floors and removing the debris at a safe distance as per direction of the Engineer in charge |
| 131 | Existing |
| 132 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge |
| 133 | First Floor |
| 134 | 25mm dia CPVC ASTM pipe (sch-80) |
| 135 | 32mm dia PVC ASTM pipe (sch-80) |
| 136 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 137 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 138 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 139 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 140 | 15mm dia CP Bib cock (Con-CHR-047KN Jaquar make) |
| 141 | 25mm dia brass full way valve (Shakti make) |
| 142 | 32mm dia brass full way valve (Shakti make) |
| 143 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 144 | 125mm CP grating |
| 145 | 15mm size C.P. flange |
| 146 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 147 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 148 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 149 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 150 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 151 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 152 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 153 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 154 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 155 | 110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make) |
| 156 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 157 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 158 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 159 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 160 | 110mm U-PVC Plain shoe bend(Ori Plast/Finolex/Supreme Make) |
| 161 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 162 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 163 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 164 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 165 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 166 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 167 | European water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 168 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 169 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with |
| 170 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 171 | 25mmx600mm long CP towel rail |
| 172 | Towel ring |
| 173 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 174 | 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 175 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 176 | 600mmx450mm size B.E mirror (swivelled type) |
| 177 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 178 | CP soap holder |
| 179 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 180 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 181 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-charge |
| 182 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 183 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 184 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 185 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 186 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 187 | Ext. S/D Portion |
| 188 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 189 | 100mm dia P.V.C. pipe |
| 190 | 150mm dia P.V.C. pipe Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
