|
| 1 | Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets GI framework complete all as specified and directed. |
| 2 | False ceiling grid galvanzed steel tee/ angle (Powder coated ) of grid size 600x600mm comprising of main and secondry tee ( weight not less than 240gm /RM) and wall perimeter angle (weight of section not less than 217gm/RM) all around of walls suspended with 4mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick designer ceiling boards size 595x595mm fixed in position all as directed. |
| 3 | Dismantling asbestos cement (corrugated, semi corrugated) sheets including ridges as in roof covering, complete all as speciified and directed. |
| 4 | Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 6 | Dismantling mild steel work of any description in any position complete all as specified and directed. |
| 7 | Structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed. |
| 8 | Demolition / taking down of existing old tarfelt , water proofing membrane, water proofing plaster of any description and of any type over RCC roof including roof tiles, cement mortar screed of any thickness including making good the surface to receive new screed and removal of debris outside the MoD land complete all as specified and as directed. |
| 9 | Rendering 15mm thick cement plaster with cement mortar(1:3) with water proofing compound on fair finishes of brick work or concrete surface of roof slab, to be finished even and smooth without using cement all as specified and directed. Note : Water Proofing Compound/Admixture is not paid separately. |
| 10 | Water proofing treatment to RCC roof slab including parapet as under :- (a) Ist Course : Apply a coat of bituminous primer conforming to IS-3384@ 0.40 Kg /Sqm on prepared surface of plaster and after drying of primer, apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm on plastered surfaces. (b) 2nd Course : APP (Atactic Polypropylene) modified polymeric membrane, 5 layered, 3 mm thick weight not less than 4.0 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 150 mm end overlap, membrane has to be laid with LPG torch and overlap sealed and finished neat, all joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying of membarance.(c) 3rd Course : Apply a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.2 Kg/sqm over membrane and dusted with dry sand @ 0.50 to 1 Kg/sqm. (i) Covered fillet in PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) of required radius shall be provided at the junction of roof and vertical surface such as parapet wall/mumty around opening and treatment mentioned above shall be applied followed by a cement plaster 20mm thick in cement mortar(1:6). Note : (i) Roof treatment work shall be carried out through approved manufacturers only. |
| 11 | Preparation of new or previously untreated surface of concrete or surfaces of any description and applying two coats of aluminium paint over non-accessible roofs surfaces 10cm width or girth not otherwise described complete all as specified and directed. |
| 12 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 13 | Brick work with sub class 'B' bricks , straight or curved on plan exc. 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 14 | Ditto as per item No 13 here in before but except bricks complete all as specified and directed. |
| 15 | Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 16 | Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 17 | Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 18 | GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required complete all as specified and directed. |
| 19 | Applying 2mm thick wall care putty over newly plastered surfaces of wall complete all as specified and directed. |
| 20 | Supply only Liquid water prrofing compound complete all as specified and directed. |
| 21 | Complete removal of existing treatment of old surfaces of walls complete all as specified and directed. |
| 22 | Preparation of newly plastered and unplastered surfaces of walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed. |
| 23 | Preparatioon of old plastered and unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed. |
| 24 | Preparation of newly plastered and unplastered surfaces of walls and applying two coats of premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489 : 2004, alkali/fungal/dirt resistance with silicon additives @ 1.43 ltr/10 Sqm incl exterior primer applied @ 0.90 ltr/10 Sqm complete all as specified and as directed. |
| 25 | Complete removal of old plastered surfaces of walls and applying two coats of premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489 : 2004, alkali/fungal/dirt resistance with silicon additives @ 1.43 ltr/10 Sqm incl exterior primer applied @ 0.90 ltr/10 Sqm complete all as specified and as directed. |
| 26 | Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth & applying rendering 15-20 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 including formwork/scaffolding work upto height 7.00mtr above ground level of bldg complete all as specified and as directed. |
| 27 | Demolition of reinforced cement concrete of any description and in any position including cutting reinforcement as required to facilitate complete all as specified and directed. |
| 28 | Reinforced cement concrete nominal mix Type B-1 1:2:4 (20mm graded crushed stone aggregate) for balconies, canopies, Deck slabs/ chajjas and in shelves complete all as specified and as directed. |
| 29 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and as directed. |
| 30 | Formwork to sides and soffits/faccia of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including supports, overhangs, etc. complete all as specified and directed. |
| 31 | Reinforced cement concrete type B1, 1:2:4 (using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floor,roofs,landings,balconies,canopies,shelves, deck slabs and in similar works, complete all as specified and directed. |
| 32 | Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, complete all as specified and directed. |
| 33 | Dismantling of floor hearth or wall tilling incl cement mortar bedding and removing unsv tiles and rubbish off the premises, complete all as specified and directed. |
| 34 | Vitrified ceramic tiles light shade 10mm thick (square /rectangular) polished, area of each tile n.exceeding 0.36 sqm laid as in floors etc, set and jointed in neat cement slurry and pointed in white/coloured cement to match in light shade incl 15mm thick screed bed/back coat in cement and sand mortar 1:4 complete all as specified and directed. |
| 35 | Ditto all as per item No 34 here in before but as in skirting/dado but over 10mm thick rendering in CM 1:4complete all as specified and directed. |
| 36 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 37 | Glazed ceramic coloured tiles450x350mmx7mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in CM 1:4 on other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed. |
| 38 | 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mmgraded crushed stone aggregrate) as in sub base to path/floors, complete all as specified and directed. |
| 39 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and as directed. |
| 40 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed. |
| 41 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back filling of pressed steel frame, complete all as specified & directed. |
| 42 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 01 Nos 25x3mm thick flat iron projecting 10 cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frame, complete all as specified & directed. |
| 43 | Factory made solid Panel PVC( door/almirah shutter/cupboard) shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed. |
| 44 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 45 | Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 .Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item |
| 46 | Description all as per Item No45 above, but only fixed glass pane shutter without glazing bars. |
| 47 | 35mm thick flush shutters, solid core with particle board exterior grade as per IS 2202 of 199 (Part-I) flush door shall be internally lipped as per clause .8.52.2 of SSR Part-I 2009, complete all as specified & as directed. |
| 48 | Glazed and skeleton shutters 35mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a). |
| 49 | 300mm Mild steel ordinary rat tail helical door springs including roller and roller plate fixed, complete all as specified and directed. |
| 50 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. |
| 51 | Aluminium alloy handles, fabircated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 52 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 53 | Aluminium anodised sliding door bolts round nuckle with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified and directed. |
| 54 | Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed. |
| 55 | 4mm thick glazing sheet ordinary quality with glazing and glazing pins in squares not exc 0.5sqm in each pane complete all as specified and directed. |
| 56 | 4mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane, complete all as specified and directed. |
| 57 | Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed. |
| 58 | Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP braket, incl taking down of old curtain rods, complete all as specified. Please Enable Macros to View BoQ information |
| 59 | Curtain rail ,20 mm dia Stainless steel ,chromium plated fixed with CP braket, incl taking down of old curtain rods, complete all as specified. Please Enable Macros to View BoQ information |
