|
| 1 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 3 | Dismantling of single layer mangalore pattern roofing tiles complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 5 | Dismantling wooden Battens for tiles, shingles etc, of any size including tilting filletswith spacing exc 15 cmcomplete all as specified and directed. |
| 6 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter,beam etc complete all as specified and as directed |
| 7 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 8 | Demolition cement concrete(un reinforced) (below or above ground level) and removing debris off the site complete all as speified and a directed |
| 9 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and directed. |
| 10 | M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. sett and jointed in neatt cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 11 | Ditto all as per item No 10 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 12 | M&L for coloured glazed ceramic tiles of size 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 13 | S&F Pressed steel frames of 1mm thick factory made of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 14 | M&L PCC type B-0 (1:2:4) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed. |
| 15 | Supply and fix Aluminium powder coated sliding widnow with appropriate frame section(with three track) including two glazed and one mesh window shiutters with 5mm thick plain glass and including on shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.The details of window section shall be as follows 1) Window bottom track(for glazed window) frame shall be of 31.75mmx 61.60mmx 1.2 mm and top track frame shall be of 31.75mmx 61.6mmx 1.2mm thick.2)Window bottom & top track (for mesh window) frame shall be of 19mmx 31mmx1.2 to 15mm thick .3) Th window sash frame for glazed window shall be of 39.40mmx 17.70mmx 1. to 1.2mm thick and the mesh shutter sash shall be of 43mmx 14mmx 1 to 1.5mm thick. |
| 16 | Supply and fix Aluminium powder coated openable/side fixed ventilator with apprprate frame section including 4 to 5mm thick pin head or hatched glass all as directed including provn of appropriate opening for fixing of exhaust fan and including with or wthout gauged shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.Note : The contractor should be approved the frame section for Almn window/& window/ ventilator from the Engr in charge before procurement of the material. |
| 17 | S & F Aluminium grill with a pitch of 52mm to 80mm fixed partition weight not less than 2.0 kg/sqm with appropriate aluminium frame/ channel as per manufacturing and design including necessary drilling, cutting, fabrication etc complete all as specified and directed. |
| 18 | Supply and fix UPVC door shutters with frames of approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc complete all as specified and directed. |
| 19 | M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 20 | M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6 mm thick lipping patty around the shutter complete all as specified and directed. |
| 21 | S&F Stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples omplete all as specified and directed. |
| 22 | S&F Mild steel butt hinges 100mm long, medium weight, cold rolled complete all as specified and directed. |
| 23 | S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 24 | S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete all as specified and as directed. |
| 25 | S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 26 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 27 | Supply and fix 18mm thick Pre laminated particle board marine grade, laminated one side and white balancing other side fixed with screw to timber framed work etc., complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra. |
| 28 | Supply and fix in repairs Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 29 | Supply and fix in repairs Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 30 | Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 31 | M&L for Anodised Aluminium snap grid frame work of size 605x605 mm for false ceiling all as specified |
| 32 | M&L for GI hangers for false ceiling grid 6 mm dia (up to 1200 mm length) adjested level to fixed to roof slab by meands of ceiling clips made out ofGI flat 40x30 mmsize 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed. |
| 33 | M&L for Non asbestos fibre cement building boards 8 mm thick fixed to aluminium snap grid in ceilings fixed flat or slop complete all as specified and as directed |
| 34 | M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate as in floors for levelling course including finish the surface complete all as specified and directed. |
| 35 | M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete all as specified and directed. |
| 36 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete as in hard or dense soil complete all as specified and directed. |
| 37 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for manhole&Septic tank complete all as specified and directed. |
| 38 | Excavating in trenches (including demolition of PCC below gorund level )not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc and getting out in hard /dense soil complete all as specified and directed. |
| 39 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and directed. |
| 40 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks n exc 10cm width and setting in mortar(1:4) complete all as specified and directed. |
| 41 | Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 42 | Rendering 15 mm thick on old unplastered stone masonary surface in CM 1:6 finished even and smooth with out using extra cement complete all as specified and as directed |
| 43 | Rendering 15 mm thick on old unplastered stone masonary surface in CM 1:4 finished even and smooth with out using extra cement complete all as specified and as directed |
| 44 | M & L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 45 | M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and directed. |
| 46 | Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 47 | Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 48 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 49 | S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 50 | S&F 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690gms) complete as specified and as directed. |
| 51 | S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 52 | S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 53 | S&F Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets CP waste coupling (flat back or angle back type) any size and 32mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed. |
| 54 | S&F PVC valveless, syphonic action type, flushing cistern, 10 Ltrs capacity low level, white, with inlet, ball valve, float and handle including brackets High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing in repairs complete all as specified and as directed. |
| 55 | S&F in repair of Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed. |
| 56 | Supply and fix in repairs Piller tap 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. |
| 57 | S&F in repair health faucet ABS bodycomplete all as specified and as directed.mild steel chromium plated suitable for 15 mm dia pipe with 1.25m long flexibletube and ABS wall hook incl makingconnections fixed in position complete all as specified and as directed. |
| 58 | Supply and fix in repairs aluminium anodised tubular towel rail D type 20 mm dia 600mm long between flanges complete all as specified and as directed . |
| 59 | Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 60 | S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.. |
| 61 | S&F 600x450mm bevel edged looking mirror of selected quality of glass 5 mm thick moulded on 6 mm thick AC building board or commertial ply wood and fixed to wooden plugs with chromiumplated brss scrows and cup washers complete all as specified and directed. |
| 62 | S&F sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs wachers and wastesincl bedding of cement mortor to dwarf wall or or fixing cantilever brackets and connecting to unionto pipe overall size 915x460mm bowl size 410x330x160 mm mm complete all as specified and as directed |
| 63 | Supply and fix stainless steel plate racks made of stanless steel 0.80mm thick sheet standard size 24'x36x10\\" and design as approved by GE, complete all as specified and as directed. Make: Nirali/Parryware as approved by GE. |
| 64 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 65 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 66 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 67 | S & F PVC (SWR) bends any radious 110 mm bore provided with access door complete all as specified and as directed. |
| 68 | S & F PVC (SWR) bends any radious 75mm bore provided with access door complete all as specified and directed. |
| 69 | S & F PVC (SWR)110mm bore branch piece single(single Y) equal or Unequal complete all as specified and directed. |
| 70 | S & F PVC (SWR)75 mm bore branch piece single(single Y) equal or Unequal complete all as specified and directed. |
| 71 | S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal with access door complete all as specified and directed. |
| 72 | S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal with access door complete all as specified and directed. |
| 73 | S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 74 | Supply and Fix, 500 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) etc., complete all as specified and as directed. |
| 75 | M&L PVC (SWR) Gully traps 125/110 mm setting and jointing with solvent cement complete all as specified and as directed. |
| 76 | M&L PVC (SWR) Floor traps 75 mmplain with grating including jointing with solvent cement complete all as specified and as directed. |
| 77 | Material and labour for Granite work with 20mm thick machine cut, Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed. |
| 78 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landingss and similar work, not exceeding 200mm thick (horizontal of sloping) even and Rough finish complete all as specified. |
| 79 | M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate )as in slab supproted on walls, beam and columns in floor, roof/cooking platforms etc complete all as specified and directed. |
| 80 | Supply and fix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm in any length with rubber ring joint complete all as specified and as directed. |
| 81 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 82 | S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and directed |
| 83 | S&F Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 84 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 85 | M&L preparation of old plastered wall surfaces and applying two coats of cement base paint complete all as specified and as directed |
| 86 | M&L preparation newly plastered surfaces of internal walls and applying two coats of oil bound distemper over a coat of chalk whitining primer on plastered surface complete all as specified and as directed. |
| 87 | M&L preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed |
| 88 | Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed. |
| 89 | Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soil complete all as specified and directed. |
| 90 | Removing excavated material not exc 50M and depositing where directed (Soils) at a level not exc.1.5 mtr above the starting point complete all as specified and directed. |
| 91 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed. |
| 92 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 93 | M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way complete all as specified and directed. |
| 94 | All as per Item No 93 herein before but 3 pin socket out let 6 Amps on independent board |
| 95 | M&L for point wiring complete all all as specified with 1100 Volts grade 2.5 sqmm single core PVC insulated FRLS 1000 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board complete all as specified and directed. |
| 96 | S&F Modular type socket out let 2/3 pin, 6/16 Amps, 2 module all as specified and as directed. |
| 97 | S&F Modular type Socket outlet 6 Amps 2/3 Pin, 2 module complete all as specified and directed. |
| 98 | S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed. |
| 99 | S&F Modular type switch single pole 6 Amps, 1 module, one way all as specified and as directed. |
| 100 | S&F Modular type Bell switch single pole 6 Amps one way, one module all as specified and as directed. |
| 101 | S&F Call Bell, AC, ding dong type 230 Volt complete all as specified and directed. |
| 102 | S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and directed. |
| 103 | Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS20WLED865SPCSSIND OUG G |
| 104 | Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS10WLED865SPCWHIND or equivelent |
| 105 | S&F decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 120 lumens/watt output made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.Make :- Havells cat part No HEXAFT10WLED857SSYMBOPC or equivlent Bajaj / crompton |
| 106 | S & F SPN DB, 8 Way, Metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. |
| 107 | S&F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 kA all as specified and directed. |
| 108 | S&F Miniature circuit Breakers, SPN of capacity 32 Amps, C-Series 240 Volts with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. |
| 109 | Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings including taking down old unsv submain wiring complete all as specified and directed.Note: The cost for concealed submain wiring is deemed to be inclusive of cutting chases in stone masonary wall/roof and making good. |
| 110 | Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories incl taking down old cable complete all as specified & as directed. Note :- Necessary earthwotk, PCC etc shall be measured & Paid separately under relevant items of works |
| 111 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI Pipe etc. and getting out in hard dense soil complete all as specified and as directed. |
| 112 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed. |
| 113 | Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 114 | Supply, spreading and compacting of riddled earth in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed. |
| 115 | Supply and laying sub class \\"B\\" bricks in trenches for protection of UG Cable with width equal to length of bricks, laid dry & flat complete all as specified & as directed. |
| 116 | Supply and fixing GI pipe light grade (ISI Marked) of size 40 mm for cable protection to be fixed on pole with necessary clamps complete all as specified and directed Note :- Unit rate quoted is deemed to be inclusive of MS clamps of suitable size/number along with nuts/bolts/washers etc. to be fixed on pole complete all as specified and as directed. Please Enable Macros to View BoQ information |
