|
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed . |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | Dismantling mild steel work of any description not otherwise provided. |
| 5 | S&F Roof trusses (framed), trussed, purlins, trusses gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) quality A. |
| 6 | S&F MS works as in wind ties for roof including securing bolts etc complete all as specified. |
| 7 | M&L for painting two coats of synthetic enamel paint over one coat of red oxide including preparation to new / untreated steel and surfaces of any description, not otherwise described, over10 cm width or grith all as specified and directed. |
| 8 | M&L for painting one coat of Anti corrison synthetic enamel paint including preparation to previously treated old steel surfaces of any description, not otherwise described, over10 cm width or grith all as specified and directed. |
| 9 | Dismantling of ceiling boards of any description and any thickness, fixed in any position all as specified and directed incl cover fillets if any size. |
| 10 | M&L for false ceiling with aluminium grid work (size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle Hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs means of ceiling cleats made out of G.I flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 11 | S&F in repairs Eco board 600 X 600 X 4mm thick fixed in aluminium frame work with screws or nails etc complete all as specified and as directed. |
| 12 | Supply and fix in repairs PVC (SWR) pipes 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 13 | Supply and fix in repairs 110mm PVC (SWR) bends any radius with access door all as specified and directed |
| 14 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete. |
| 15 | M&L for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement) (as per manufacturer's instructions) complete all as specified. |
| 16 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 17 | S & F coloured joint free non Skid ceramic tiles10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified. |
| 18 | Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 19 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. |
| 20 | M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and fair without using extra cement.(WPC shall be added in only 5mm thick top layer of plaster @ 3% by weight of cement content or as per manufacturers instructions.) |
| 21 | Supply only integral water proofing compound |
| 22 | M & L for two coats of OBD over a coat of primer on newly plastered surfaces of walls including nesessary preparation of surfaces all as specified and directed. |
| 23 | M& L for two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer over a coat of exterior grade wall care putty including preparation of new wall surfaces etc complete all as specified and as directed. |
| 24 | M & L for two coats of OBD over a coat of primer on old plastered surfaces of walls including nesessary preparation of surfaces all as specified and directed. |
| 25 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed. |
| 26 | M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed. |
| 27 | Material & labour for chequred cement concrete tiles of size 20 cm x 20 cm x 25 mm with size of chips up to 12 mm jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:6) all as specified and directed. |
| 28 | M&L for Demoliotion of Reinforced cement Concrete parapet wall of any description and in any position not otherwise specifically provided for |
| 29 | M&L for 100mm thick PCC 1:3:6 type C2 as in sub base complete all as specified and directed . |
| 30 | M&L pre-cast cement concrete masonary in PCC 1:3:6 type C1 using 20mm graded aggregate with solid block, exceeding 10cm in width setting in CM 1:6 complete complete all as specified and directed . |
| 31 | Supply and Fix Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 (Gde E165) all as specified and as directed by Engg-in-Charge |
| 32 | Supply and Fix in repairs Stainless Steel railing, (SS 316 grade) of safety railing consists of vertical and horizontal bars of thickness not less than 2.0mm, welded to base plate , MS plate, maintenance free, corrosion resistant, aesthetic looking stainless steel extruded sections complete all as specified and as directed by Engineer-in-charge. |
| 33 | Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in soft/loose soil, complete all as specified and as directed. |
| 34 | M&L Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling complete all as specified and directed . |
| 35 | M & L for RCC- M - 30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed |
| 36 | M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts as specified and directed |
| 37 | M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span as specified and directed |
| 38 | M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies , canopies, deck slabs and in,shelves and the likeall as specified and directed |
| 39 | M & L for Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or tobatterfor Fair finished surfaces. |
| 40 | M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions |
| 41 | Use and waste of form work to sides and sofit of Beams for Fair finished surfaces. |
| 42 | Use and waste of form work to sides and sofit of Roof Slab & Chajja etc for Fair finished surfaces. |
| 43 | M&L for TMT bars 10 mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia |
| 44 | M&L for TMT bars 6 mm to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia |
| 45 | All as per items No 44.00, but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like |
| 46 | M & L for rendering 5 mm thick in CM 1:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete. |
| 47 | M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty as specified and directed. |
| 48 | All as item no 47 above but on Ceiling surfaces |
| 49 | M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two ormore coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primerapplied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima) |
| 50 | M & L for water proofing treatment with the following specifications description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.5 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.Note :- Water proofing compound shall be measured and paid separately. |
| 51 | M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed |
| 52 | M&L Removal excavated material to a distance not exceeding 50 M and depositing where directed at a level n. exc. 1.5 m above starting point as in soils complete all as specified and as directed. |
| 53 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and directed. |
| 54 | M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce. |
| 55 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 100mm thick as in sub base complete all as specified and directed . |
| 56 | M&L Vitrified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes. |
| 57 | M&L Vitrified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering of mortar 10 mm thick in CM 1:4 in skirting/dados. |
| 58 | M&L Vitrified tiles 10 mm thick (square/ rectangular) any shade polished, area of each tiles exceeding 0.42sqm and not exceeding 1.00sqm, in wall surfaces(skirting/daddo) set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of 10 mm thick in Cement mortor 1:4 all as specified and directed. |
| 59 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 60 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 61 | S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and as directed by Engineer-in-charge. |
| 62 | S&F 150mm Aluminium anodised barrel tower bolts of extruded sections. |
| 63 | S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised. |
| 64 | S & F aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) 250mm long and fixing clips of sheet, cast or extruded section and fixing bolt of cast aluminium alloy, complete all as specified and as directed by Engineer-in-charge. |
| 65 | Supply only 4.0mm thick sheet glass, ordinary quality in squares n exc 0.50 sq.m in each pane. |
| 66 | S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed |
| 67 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directions of Engineer-in-charge. |
| 68 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 69 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm. |
| 70 | All as per item No. 69 above but 25 mm dia |
| 71 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls |
| 72 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor. |
| 73 | S&F PVC (SWR) Gully trap 125/110 mm,setting and incl joining with solvent cement |
| 74 | S&F 110mm PVC (SWR) WC connector bent type setting including Joining with solvent cement |
| 75 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall. |
| 76 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floors. |
| 77 | S&F 75mm dia PVC (SWR) bend complete all as specified and as directed |
| 78 | S&F 110mm dia PVC (SWR) bend complete all as specified and as directed |
| 79 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 80 | S&F PVC (SWR) cowls 100 mm dia complete all as specified and as directed. |
| 81 | S&F 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends. |
| 82 | S&F Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipewith connecting Assoceries complete all as specified & directed by Engineer-in-charge. |
| 83 | S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets all as specified & directed by Engineer-in-charge. |
| 84 | S&F 2 Way Bib Cock Double handle with flange 15 mm bore cast copper alloy Chromium plated with wall flang, screwed down, screwed for pipes. (Make:- Prayag Cat No -8312 or Equivalent) |
| 85 | S&F Hand Shower (Health Faucet) 1 Meter Long Flexible Tube & Hook. (Make:- Jaquar Cat No ALD CHR -585) |
| 86 | S&F looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge.. |
| 87 | S&F Chromium Plated Steel Grating of 100mm size. |
| 88 | S&F Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge. |
| 89 | S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) all as specified & directed |
| 90 | S&F PVC flexible connections 15 mm dia 450 mm long with brass checknuts . |
| 91 | S&F framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc confirming to Fe 410-W(Gde-E-250) quality-A all as specified and directed. |
| 92 | Dismantling of stone slabs and tiles of any description or thick ness in floors aprons etc laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 93 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) with and including 10mm thick bedding in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as directed. |
| 94 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface. |
| 95 | Excavation in trenches not exceeding 1.5m wide and n exc 1.5m in depth for foundation etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified. |
| 96 | M&L PCC 1:3:6 type C2 (40 mm graded stone aggregate) in foundation concrete for post holes complete all as specified and directed |
| 97 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 75mm thick as in sub base complete all as specified and directed .. |
| 98 | M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in 40mm thick as in flooring complete all as specified and directed . |
| 99 | M&L Coloured Non-Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floor etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 15mm thick screed bed in CM (1:6) all as specified. |
| 100 | All as per item no 99 above but in skirting over 10 mm thick rendering in CM 1:4 complete all as specified and directed |
| 101 | Removing excavated soil to a distance n.exc 50 m and depositing as directed |
| 102 | Taking down carefully aluminium point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed. |
| 103 | M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVCconduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets,fan regulators etc., all as specified and as directed forthe following:- One light point controlled by one switch |
| 104 | One ceiling fan point controlled by one switch and one regulator |
| 105 | One 3 pin switch socket outlet point 5 amps on same board with other switches |
| 106 | One 3 pin switch socket outlet point 5 amps on independent board |
| 107 | All as per item No 103 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed. |
| 108 | Supply and fix switch piano flush button single pole oneway 5 amp complete all as specified and as directed. |
| 109 | Supply and fix switch socket combination 3 & 2 pin (multi pin) 5 amp flush type complete all as specified and as directed. |
| 110 | Supply and fix socket outlet multipurpose 3 & 2 pin 5 amp flush type complete all as specified and as directed. |
| 111 | Supply and fix switch socket outlet multipurpose 3 pin 15 and 5 amp controlled by one switch, flush type complete all as specified and as directed. |
| 112 | Supply and fix fan speed regulator, electronic suitable socket type for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge |
| 113 | Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed. |
| 114 | Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed.Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc |
| 115 | Supply and fix MCB single pole 240 volts, 6 to 32 amps \\"B\\" series complete all as specified and as directed by Engineer-in-Charge |
| 116 | Supply and fix single pole and netural 240 Volts 32 amps complete all as specified and as directed by Engineer-in-Charge |
| 117 | Supply & fix in repair LED flood light fittings 100 watts, pressure die cast aluminium housing with toughened glass and high power LED and secondary lenses IP 66 protection, luminaire including driver and required for hanging the fitting. The fitting including fixing arrangements a complete etc.Note : Fittings shall will be installed in Hangers/Sheds, height up to 10 Meters only and directed by Engr-in-Charge |
| 118 | Supply and fixing in repair aluminium housing LED batten 22 /20 Watt mounted fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 119 | Supply and fixing in repair aluminium housing LED batten 10 Watt mounted fitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 120 | S&F in repairs 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. |
| 121 | Taking down old serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers & bolts including cotter pin for complete all as directed. |
| 122 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 123 | Supply & Lay XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 10 Sqmm 2 Core in trenches/along the wall/including making all connections, saddles, spacers including taking down old unserviceable cable, complete with aluminium lugs as required at site and as directed by Engr-in-Charge |
| 124 | Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed. |
| 125 | Supply and fix aluminium housing LED batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. |
| 126 | S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 127 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant complete with IP 65/66 protection complete all as specified and directed. |
| 128 | Supply and fix ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed. |
| 129 | Supply and fix exhaust fan steel body suitable for on working of AC 230 V ,50 Hz 300 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified |
| 130 | Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge |
| 131 | M & L for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of casing caping & one run of earth continuity conductor shall be measured as one running metre. |
| 132 | S&F 50 mm GI tubing light grade galvanised with all fittings laid in trenches. |
| 133 | Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed . |
| 134 | Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and directed |
| 135 | Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed |
| 136 | M&L for cutting existing 40mm GI line and making branch connection of 25 mm dia GI line including fittings required for connection complete all as specified and directed |
| 137 | Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specifed and directed |
| 138 | Supplying, hoisting and fixing rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of 1000 Litre capacity etc complete all as specified and directed. Please Enable Macros to View BoQ information |
