|
| 1 | Excavation in Foundation in ordinary soil (loam, clay or sand) including lift up to 1.5M and lead up to 50M. and including filling, watering and ramming of the excavated earth into the trenches or into the space between the building and the sides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I upto a distance of 50M. from the foundation trenches.(SI NO 251) |
| 2 | Providing and laying concrete 1:6:12 (1 cement, 4 fine sand and 8 stone agregate 40 mm size) curing complete, including cost of all T&P complete (S.I. No. 273) |
| 3 | R.C.C work with cement approved coarse sand and 2 cm. (3/4\\") gauge approved stone grit in the proportion 1:1.5:3 (1 cement: 2 coarse sand: 4 aggregate) in raft excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG binding wire and necessary centering and shuttering etc. and also including supply of all materials labour and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150 as per direction of Engineer-in-charge.(S.I,.No.287 A) |
| 4 | R.C.C work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all meterials labour and T&P etc. required for proper completion of the work. . (SI NO 288 A) |
| 5 | M-150 brick work in 1:6 cement and coarse sand in super structure avobe plinth level including necessasary cutting and moulding of bricks works as required and also including honey combed brick in thickness of wall more than12cm with all materials labourT&P required for proper completetion of work as per direction of E/I |
| 6 | R.C.C work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:2:4 in lintels of doors & windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . (SI NO 283) |
| 7 | R.C.C work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:1.5:3 in column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all meterials labour and T&P etc. required for proper completion of the work. . (SI NO 288 A) |
| 8 | M-150 brick work in 1:4 cement and fine sand of 1.25fm in foundation and plinth including supply of all materialT&P complete for proper completion of work as per direction of E/I (SI NO305) |
| 9 | R.C.C work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:1.5:3 in BEAM excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work. . |
| 10 | R.C.C work with cement, approved coarse sand and 2cm (3/4\\") gauge approved stone grit in the proportion of 1:1.5:3 in lintels of doors & windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials labour and T&P etc. required for proper completion of the work.. |
| 11 | R.C.C. work in 1:15:3 in T-Beam Slab. (SI NO 288A) |
| 12 | Cement Concrete with 2cm gauge approved stone ballast, approve coarse sand and cement in the proprotion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion for the work. |
| 13 | Mild steel or iron in plain work such as reinforcement concrete or reinforced brick work (when not included in an overall rates), wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bends, hooks and authorized overlapping shall be measured upto floor two level. |
| 14 | Mild Steel or Iron work in heavy sizes such as trusses, builts up gates, door, frames, records racks, roof work, gates etc. wrought to required from, including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts and wastages etc. and their fixing required for completion of the work. (S.I. No. 503) |
| 15 | Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 16 | S/F of Z section window or ventilator shutter. |
| 17 | S/F of 32 mm thick plywood door shutters. |
| 18 | Float glass panes of nominal thickness 4 mm |
| 19 | Supplying and fixing rolling shutters of approved make, 80x1.25 mm M.S. laths with 1.25 mm thick top cover made of required size M.S. laths, interlocked together through their entire length and jointedtogether at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. |
| 20 | M-150 Brick work in 1:4 cement and Sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all materials, L T&P etc. required for proper completion of the work. |
| 21 | providing and laying metegral cement based treatment ( Brick coba) 0r water proofing on horizantal surface at all depth below ground level for under ground structurs as directed by Enginner in chief and consistring of 1st layer of 22mm to 25 mm thick approved and specified rough stone stab over a 25mm thick base of cementmother 1:3 mixed wiith water proofing compound congirming to IS 2645 in the recommended proportion over the levelling course joints sealed and grouted with cement slurry mixed with water proofing compound Chapter 6 NS (Page No. 23) |
| 22 | Supply and fixing of 110cm internal diameter P.V.C. (6 kg/cm2 ) down pipes complete with rose head, bends, shoes and gratings and including supply of nacessary M.S. clamps 25mm x 3mm size fixed etc. complete. |
| 23 | Port Land Cement concrete with 4cm gauge brick ballast, fine sand of 1.25 FM and cement in proportion of 1:1.5:3 in foundation & under floors, including supply of all materials , labour & T&P etc. required for proper completion of work. |
| 24 | S/F of 6mm thick plain sheet. |
| 25 | Filling of carted earth in trenches , plinth and sides of foundation etc. in lavers not exceeding 20cm. in depth consolidating each deposited layer by ramming & watering and dressing and including cartage of earth upto 5.00km and all taxes required for proper completion of the work. (AOR) |
| 26 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceding of 8 km. from the site of work and including watering, ramming , dressing etc. Rate includes cost of all of all materials, labour and T&P etc. required for proper completion of work. (Including Royalty) . (SI NO 255) |
| 27 | 40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) finished with floating coat of neat cement with out base concrete including fixing of glass strips. (Excluding cost of glass strips) |
| 28 | 40 mm thick cement concrete flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate of size 12.5 mm and below) finished with floating coat of neat cement with out base concrete including fixing of glass strips. (Excluding cost of glass strips) without base. |
| 29 | Providing and fixing glass strips 5.5 mm thick and 35mm wide depth in joints of floors. (SINO.2.f) hardoi (Chapt -1-2-F) |
| 30 | 12 mm thick plaster with cement and coarse sand morter in proportion of 1:4 over brick work including supply of all material labour T&P etc required for proper completion of work and also including racking andwashing joints |
| 31 | 20 mm cement plaster in dado and skirting 1:2 consisting of one part of cement and 2 part of approved course sand laid in pannels,finished with 3 mm floating coat of neat cement or cement and marble dust in ratio 5:1 including supply of all materials, labour and T&P etc. required for proper completion of work (SI NO.597) |
| 32 | Add Extra cost of rough ploster. |
| 33 | Making grovers 10 to 12mm wide & 8mm deep. |
| 34 | Making khurra 45x45cm with averoge thickness sam. |
| 35 | Providing & Applying white cement based putty avarge thickness 1mm each two cots. |
| 36 | White cement washing three coats on undercorated wall and ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar drop and other foreign matter including supply of all materials labour & T&P etc. required for proper completion of work. |
| 37 | Finishing walls with oil bound distemper two coats withapproved qualityon new wall to give an even shade including througlybrooming the surface to remove all dirt dust morter drop and other foreign mater as per direction of E/I SI NO(649+650) |
| 38 | Finishing walls with Premium Acryclic Smooth exterior paint with silicon additives of required shade new work(two coat) NBO13.47 (Page No. 38) |
| 39 | Painting two coats over priming coat on new steel or wood surface including priming coat with superior syntheic enamel such as Berger, Asian, Neroluc LUXOL 3, Hi-gloss apcolite superlac, DULUX specified burshing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of all materials labour tools and plants etc. required for proper completion of the work. (S.I. No. 641+642) |
| 40 | providing and laying concrete 1:4:8 (1 cement, 4 fine sand and 8 stone agregate 40 mm size) curing complete, including cost of all T&P complete (S.I. No. 281) |
| 41 | laying C.C road slab consisting of 1:1.5:3 cement corse sand & approved 20mm gauge stone ballast, over prepared sub grade after its rectification & bringing it to proper camber and including supply of all materials, labour T&P etc. required supply of all materials, L T&P etc. required for proper completion of the work. Please Enable Macros to View BoQ information |
