Name of Work:- ;krk;kr foHkkx dkuiqj uxj fuxe ds vUrxZr nhi flusek ls lksVs okys ckck rd FkeksZIykLV isfUVx ,oa lksyj dSV vkbZ dk dk;ZA
Sl. No.
Item Description
1
Providing and laying hot applied thermoplastic compound 2.5 mm thick reflectorising glass beads@ 250gms pe sqm area. Thicness of 2.5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking)
2
CATS EYE (3M) Providing and fixing of raised pavement markers having moulded body of polycarbonate ASA HIPS or ABS able to support a load of 13.635 M.T.tested in accordance with ASTMD 4280 type H and other requirement mentioned in MORT&H Circular,its reflective lens made of micro prismatic lens (capable of providing total internal reflection of light )
3
Soler cats eye Solar road studs of powerful mode with bright LED light. Aluminium die cast body of matt finish having high intensity 3x2 Nos. flashing light throughout the light. Amber or Red Colour, all weather resistant with superior solar cell and side reflectors.
4
Pole Marker Supply & Fixing of super reflective sheet size 17.5''x4'' of red colour and 17.5''x4'' of amber colour to be pasted on polse by super adhesive.
5
Retro reflectorisrd Traffic sign as per IRC 67-2012 providing and fixing of retro-refiectonsed cautionary. Mandatory and informatiory sign as per IRC:67-2012 made of high intensity gradw sheeting type-IV vide clause 801.3 fixed over aluminium sheeting 5mm thick supported on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of propety designed foundation with M 15 grade cement concete 45cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. 60 cm Circular with diffinitation plate (20cm x 60cm) (Speed Breker Sign Board)
6
Flexible Median Marker As Per IRC 79:2019 Flexible Median Marker should be used for improving median visibility during dark hours ,Use of Median Marker provides safety againsl collision happening with medians during night time.The marker height shall be a minimum of 180mm width 120mm &Body Thickness 6.5mm etc.
7
Linear Delinator System (LDS) Supply &Fixing of Linear Delinator System (LDS)panel made of micro Prismatic Retro Reflective sheeting type Xl duly laminted on thin aluminium foil to a unique corrugated shape to provide Retro Reflective across wide range of observations and external angles. Each LDS panel is to be firmly fixed on existing concrete/brick work with 16 Nos fasiner/screw.
8
Add 18 % G.S.T. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
