|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.DSR code 2.6.1 |
| 2 | Providing and Laying in position cement Concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1cement: 4 coarse sand (zone-III) derived from natural sourse : 8 graded stone aggregates 40mm nominal size derived from natural sources). DSR code 4.1.8 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortor 1:6 as DSR code 6.1.2 |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:2 (1 cement :4 coarse sand) SOR Lucknow 14.08.2020 (DSR No.6.13.2) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.3 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform DSR 5.9.3 |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars DSR 5.22.1 |
| 8 | 15 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)DSR 13.2.2 |
| 9 | 12 mm cement plaster of mix : 1:6(1 cement: 6 Fine sand)DSR 13.1.2 |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2 |
| 11 | 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources) DSR 4.1.3 For Hold Fast |
| 12 | Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.Area of slab over 0.50 sqm DSR 8.1.1.2 |
| 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work DSR 8.3.2 |
| 14 | P&F of factory made door of chaukhat & shutter with complete tower bolt sliding handle etc as per M.R. |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.. DSR 10.16.1 |
| 16 | Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone DSR 7.32.1 |
| 17 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR 13.48.1 |
| 18 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28 |
| 19 | Supply of fitting of 12.50 mtr high mast shaft of approved make with rising system hot dip glavanizedinside & out side dip, heaving pole sheet thickness 3mm Top dia minium 150mm Bottom dia 310 mm base plate 25 mm thick sutible for wind velocity as perIS 875 part 3 & having no circumferential weld with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation asper manufature drawing / site reuiment along with fondation bolt nuts, washer, anchor plates etc complete in all respect.PWD Electircal SOR SI.No.-651 |
| 20 | Providing & fixing water closet squatting pan (Indian type WC pan) with 100mm sand cast iron P or S trap 10 liter low level white PVC flushing cistern i/c all complete DAR 17.1 |
| 21 | Providing & fixing water closet squatting pan (Indian type WC pan) with 100mm sand cast iron P or S trap 10 liter low level white PVC flushing cistern i/c all complete DAR 17.1 |
| 22 | P/F 110mm dia PVC pipe extra item 31 |
| 23 | P/F 110mm dia PVC socket extra item 37 |
| 24 | P/F 110mm dia PVC bend extra item 34 |
| 25 | P/Fixing of chlorinated polyvinyl chloride (CPVC) pipe having thermal stability for hot & cold water supply i/c all complete internal work exposed on wall as per DAR 18.7 == 15mm nominal outer dia pipes |
| 26 | 25mm nominal outer dia pipes |
| 27 | Providing & fixing CP Brass BIB cock 15mm dia nominal bore as per DAR 18.49 |
| 28 | Providing & fixing gun metal gate valve 25mm dia nominal bore as per DAR 18.17 |
| 29 | Providing & fixing CP Brass stop cock 15mm dia nominal bore as per DAR 18.52 |
| 30 | Providing & placing PVC water storage tank as per DAR 18.48 |
| 31 | P/F wash hand basin 550x400mm size of white glazed earthen ware with a pair of 15mm CP brass pillor traps DAR 17.7 |
| 32 | Providing and wiring of light point with 1.50sqmm coper conductor in PVC condult concealed in partly slab and partly wall 138 |
| 33 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.DSR Code -21.10 |
| 34 | Supply of signboard or lokarpan stone. Please Enable Macros to View BoQ information |
