|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 2 | Dismantling wooden boarding of any description fixed in any position with nails complete all as specified and as directed. |
| 3 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with rubber washer as per manufacturer instruction complete all as specified and as directed. |
| 4 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with washer as per manufacturer instruction complete all as specified and as directed. |
| 5 | Supply and fixing mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 6 | Dismantling wall and ceiling boards (AC, fibre, pulb, insulation etc) or insulation boards slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 7 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and as directed. |
| 8 | Dismantling timber scantling 40 Sqcm and over in section, framed work in any position complete all as specified and as directed. |
| 9 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 10 | Demolition of brick work of any description and in any position built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 11 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 12 | M & L for brick work in half brick thick walls using Fly Ash bricks straight or curved on plan to any radius built in Cement Mortar 1:4 including 2 Nos of 6mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 13 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed. |
| 14 | Material and labour 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound @3% by weight of cement in top coat and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 16 | Supply only integral water proofing compound (WPC) of best quality (ISI marked). |
| 17 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 18 | M & L for reinforced cement concrete 1:1.5:3 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 19 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 20 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface of concrete complete all as specified and as directed. |
| 21 | Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surface of concrete complete all as specified and as directed. |
| 22 | Material & Labour roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 23 | Material and labour for 25mm thick PCC (1:2:4) type B0 (using 12.50mm graded stone aggregate) as floor finished even and rough to receive the top layer complete all as specified and as directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as specified and as directed. |
| 25 | Diamantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 26 | Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I)/GE. |
| 27 | Material and labour coloured Glazed ceramic tiles of size 300 X 450 X 7mm thick of premium quality as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I)/GE. |
| 28 | Material and labour 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed in cm (1:4) complete all as specified and as directed. Note: The colour / shade / design of granite shall be as approved by AGE(I)/GE. |
| 29 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 30 | Material and labour for RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, including necessary formwork complete all as specified and as directed. |
| 31 | Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 32 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Plinth protection etc surface finished even and smooth with out using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 33 | Material and labour for PCC 1:3:6 type C1 using 20mm Graded Aggregate as in surface channels and drains complete all as specified and directed. |
| 34 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 35 | Taking down chowkat with shutter without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and as directed. |
| 36 | Taking down chowkat with shutter without taking off shutter from the frame exc 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed. |
| 37 | Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including one coat of shop primer complete all as specified and as directed. |
| 38 | Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including one coat of shop primer complete all as specified and as directed. |
| 39 | Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete including one coat of shop primer complete all as specified and as directed. |
| 40 | Supply and fix 105x60mm size pressed steel, frames made of 1.25mm thick MS sheet for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate including one coat of shop primer complete all as specified and as directed. |
| 41 | Supply and fix 125x60mm size pressed steel, frames rames made of 1.25mm thick MS sheet for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate including one coat of shop primer complete all as specified and as directed. |
| 42 | Material and labour Cement concrete (1:3:6), type C-0 using 12.5mm graded stone aggregate as in filling of hollow steel frames and holdfast including necessary form work complete all as specified as directed. |
| 43 | Supply and fixing 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , smooth finish with lipping of teak wood on edges complete all as specified as directed. |
| 44 | Supply & Fixing factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed. |
| 45 | S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, sizes of sections and other details as specified in SSR Part – I, Section 8, Clause 8B.3.1 complete all as specified and as directed |
| 46 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification and drawings as shown in SSR complete all as specified and as directed. |
| 47 | Supply and fixing for 35mm thick second class hardwood plain framed panelled shutters (any numbers of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium dencity, wood particle with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed. |
| 48 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 49 | Supply and fix 3 mm thick Sheet glass, ordinary quality in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 50 | Supply and fixing 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts,of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 51 | Supply and fixing aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed. |
| 52 | Supply and fixing aluminium handles, fabricated type, anodised 150 mm long fixed with screws complete all as specified and as directed. |
| 53 | Supply and fixing stainless steel butt hinge, 100mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed. |
| 54 | Supply and fixing double action spring hinges, mild steel with steel wire spring, stove enamelled, black, size of spring hinge 150mm complete all as specified and as directed. |
| 55 | Supply and fixing Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 56 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 57 | Supply and fixing of Framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 58 | Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc confirming to Fe-290-W (Gde E-165) complete all as specified and as directed. |
| 59 | Supply and fixing in repairs chromium plated Curtain Rod of 25 mm dia including PVC rings @ 100 mm centre to centre, side brackets end knobs of size suitable to 25mm dia curtain rod fixing SS screws and rawl plugs complete all as specified and as directed. |
| 60 | Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 61 | Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 62 | Taking up or down 25mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 63 | Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 64 | Supply & Fixing in repairs, Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 20 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS-778, ISI Marked complete all as specified and as directed. |
| 65 | Supply & Fixing in repairs, Gun Metal Globe or Gate Valve of Class - I Pressure Tested of 1.5 Mpa, 25 mm bore with iron wheel head, screwed both ends for iron pipe, confirming to IS-778, ISI Marked complete all as specified and as directed. |
| 66 | Supply and fix Ball Valves, 25 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe [Minimum Weight 25mm -455 Grams] complete all as specified and directed . |
| 67 | Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 68 | Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 69 | Supplying and laying GI tubing of 25 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing complete all as specified and as directed. |
| 70 | M & L for cutting of existing GI pipe line 25mm dia for inserting tee and reducer etc for taking 25mm dia branch pipe including fittings complete all as specified and directed . |
| 71 | Supply & Fixing in repairs Vitreous China Ware Wash Hand Basin, White, Flat Back of size 550 mm X 400 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible Waste Pipe and union etc. complete all as specified and as directed. |
| 72 | Supply and fixing in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including making good the disturbed floor complete all as specified and as directed. |
| 73 | Supply & Fixing in repairs white Vitreous China Squatting Pan \\"Orissa Pattern\\" of size 580 mm X 440 mm with integral foot rests and 'P' or 'S' Trap including provision of lime concrete bedding complete all as specified and as directed. |
| 74 | Supply and fixing in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 75 | Supply & Fixing in repairs 15 mm bore, Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with or with out lettered \\"Hot\\" or \\"Cold\\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 76 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 77 | Supply and fixing in repairs Bib Taps, 15 mm dia, brass, Chromium Plated, Fancy Type, long Body with crutch or butterfly handle, screwed down for iron pipe and fixed etc. complete all as specified and as directed. |
| 78 | Supply and fixing in repairs Stop Valves/angle valve, 15 mm dia, cast copper alloy with capstan head, Chromium Plated, Fancy Type, screwed down high pressure with crutch or butterfly handle with long shank and cup [concealed type] for iron pipe etc complete all as specified and as directed. |
| 79 | Supply and fixing in repairs 15mm bore Stop Valves/angle valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 80 | Supply & Fixing in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia and union etc. including brackets and connections to pipe complete all as specified and as directed. |
| 81 | Supply & Fixing in repairs 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connectionsincluding necessary packing, union and cap complete all as specified and as directed. |
| 82 | Supply & Fixing in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass complete all as specified and as directed. |
| 83 | Supply & Fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified and as directed. |
| 84 | Supply and fixing in repairs Corner Glass Shelf of size 225mmx 225mm, height of railing 70mm including fixing arrangements complete all as specified and as directed. |
| 85 | Supply and fixing in repairs Chromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and as directed. |
| 86 | Supply & Fixing in repair Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws, wooden rawl plugs complete all as specified and as directed. |
| 87 | Supply & Fixing in repairs 600 mm X 450 mm Bevelled Edge Mirror of selected quality glass, 6 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers complete all as specified and as directed. |
| 88 | Material and labour for perperation of new wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 89 | Material and labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 90 | Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 91 | Material and labour for preparation of new steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 92 | Material and labour preparation of old steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 93 | Material and labour for preparation of new or previously untreated wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 94 | Material and labour PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent complete all as specified and as directed. |
| 95 | Supply and fixing in repair 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors /wall complete all as specified and as directed. |
| 96 | Supply and fixing in repair 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors /wall complete all as specified and as directed. |
| 97 | Supply and fixing PVC (SWR) bends any radius, 110mm bore including jointing with solvent cement complete all as specified and as directed. |
| 98 | Supply and fixing PVC (SWR) bends any radius, 75mm bore, including jointing with solvent cement complete all as specified and as directed. |
| 99 | Supply and fixing 110mm bore PVC (SWR) junction, single (single T) equal or unequal including jointing with solvent cement complete all as specified and as directed. |
| 100 | Supply and fixing PVC (SWR) vent cowl of 110mm dia including jointing with solvent cement complete all as specified and as directed. |
| 101 | Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing complete all as specified and as directed. |
| 102 | Material and labour for concealed point wiring with FRLS stranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated cable 1100 volts grade drawn through PVC conduit including all accessories etc ISI marked in concealed with GI sunken boxes with earth dolly and cover plate with frame suitable for fixing switches, sockets and regulators including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor connecting to common earth dolly for one light point/ fan point/ bell point complete all as specified and as directed. |
| 103 | All as per item No 102 above but for 3 pin 5 Amp socket outlet point controlled by one switch on the same board complete all as specified and as directed. |
| 104 | All as per item No 102 above but for 3 pin 5 Amp socket outlet point controlled by one switch on independent board complete all as specified and as directed. |
| 105 | All as per item No 102 above but with FRLS stranded copper conductor 2.5 sqmm (nominal area), two single core, PVC insulated and unsheathed cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including FRLS PVC insulated stranded copper conductor 2.5 sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly. |
| 106 | All as per item No 102 above but with FRLS 4 sqmm starnded copper conductor for one power point on independent board and including 4 sqmm earth continuity wire for AC/equipments etc controlled by one SP/SPN MCB. Note: (i) The point wiring will be done from DBs to the switch sockets of any size with three wires running independently for each point and with no tappings. (ii) MCB will be measured and paid separately. |
| 107 | Supply & Fixing ceiling rose surface bakelite with three terminals complete all as specified and as directed |
| 108 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 109 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amp, 240 Volts complete all as specified & directed. |
| 110 | Supply and fixing socket out let 3 Pin, 6 Amps flush type complete all as specified and as directed. |
| 111 | Supply and fixing Socket Outlet, 3 pin, 16 Amps and 1 pin, 5 Amps, Flush Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed. |
| 112 | Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 1.50 sqmm (Nominal area) drawn through in and including concealed PVC rigid conduit of adequate size with all accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 1.50 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 1.50 Sqmm cable and one run of PVC rigid conduit of adequate size shall be measured as one unit length. |
| 113 | Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including concealed PVC rigid conduit of adequate size with all accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 6.0 Sqmm cable and one run of PVC rigid conduit of adequate size shall be measured as one unit length. |
| 114 | Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including concealed PVC rigid conduit of adequate size with all accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 4.0 Sqmm cable and one run of PVC rigid conduit of adequate size shall be measured as one unit length. |
| 115 | Supply and fixing in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of 20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 116 | Supply and fixing in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of 10 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 117 | Supply & Fixing Energy efficient & Long life Building Security Light Luminaire, of 30 watt, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 40 mm bore GI Tube, Medium Grade of size not exceeding 1.00 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 118 | Supply & Fixing Energy efficient, Low Noise, Ceiling Fan, 1200mm Sweep of any colour as approved, 03 blades, BEE 5 Star Rated, with BLDC Motor, Copper Wound, 350 RPM, with Double Ball Bearing, Conforming to IS - 374, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50Hz, including Down Rod, Canopies, Shackles, Safety Rope, Hanging Clamps, Bushes, having P.F >0.95, Service Value >6.5, Air Delivery >215 CMM, Power Consumption less than 35 Watt, THD less than 5% including provision of Electronic speed control Regulator step type, including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and taking down existing ceiling fan of any description and depositing at MES Store Yard complete all as specified and as directed. Note: Ceiling Fan shall be provided with 03 Years onsite replacement warranty. Rate quoted is deemed to be including the same and nothing shall be paid extra on this account. |
| 119 | Supply & Fixing plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with 3 core flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down and removing old UNSV fan and depositing to MES store yard complete all as specified and as directed. |
| 120 | S & F Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] 25 Litres Capacity with 2000 Watt Capacity heating element Conforming to IS - 2082, Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 02 Nos. of 450 mm long x 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections and 15mm bore Non-Return Valve and including disconnecting and removing old unserviceable Water Heaters of any description and depositing at MES Store Yard complete all as specified and as directed. |
| 121 | Supply and fixing of MCB DB SPN 8 ways, powder coated, double door, 230 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating including taking down old unserviceable DB alongwith MCBs including making good disturbed surfaces complete all as specified and as directed. |
| 122 | Supply and fixing of MCB DB TPN 4 ways, powder coated, double door, 230 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating including taking down old unserviceable DB alongwith MCBs including making good disturbed surfaces complete all as specified and as directed. |
| 123 | Supply & Fixing in repairs of SP & N Enclosure with 2 Pole and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 124 | Supply & Fixing of MCB SP of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 125 | Supply & Fixing of MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and as directed. |
| 126 | Supply & Fixing of MCB TPN of capacity 40-63 Amps, 415 V, 10 KA 'C' curve complete all as specified and as directed.Note for serial Item No. 121 to 126: MCB and MCB DB shall be of same make as approved by GE. |
| 127 | Supply and fixing in repair LED Energy efficient decorative Post Top Lantern of 20 watt, 5700 K, with Pressure Die Cast Aluminium Housing,with Opal Acrylic Diffuser, IP65 Protection, electronic driver, all accessories internally prewired and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 128 | S & F Factory made SMC Junction Box of internal size 140 X 140 X 95mm with openable shutter and locking arrangement and including MCB, SP, 6 Amps, B Curve, 240 Volts [1 Nos] and one number heavy duty Four Way Connector for incomer and outgoing cable, suitable for Pole mounting and fixed with clamps made out of 25 X 3mm flat iron with suitable nuts, bolts, gland lugs etc duly painted with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 129 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set complete all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
| 130 | Taking out old U/s XLPE cable of any size/type complete all as specified and as directed. |
| 131 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 25 sqmm 3.5 core laid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work will be measured and paid separately |
| 132 | Supply, fixing, commissioning & testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, Electric power cable (heavy duty) with aluminium conductors, 1100 volts, grade cross sectional area 6 sqmm 2 core laid in trenches/fixed to wall/under road/pipe as per IS 7098 (Part I) etc including cable glands, aluminium lugs complete all as specified and as directed.Note:-Excavation and earth work will be measured and paid separately |
| 133 | Materials and labour for brick protection cover to underground cables with sub class ‘B’ over burnt brick of size 23 X 11.5 X 7.5 cm, (locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and as directed. |
| 134 | Materials and labour for sand filling around the cable with approved quality coarse sand for sand cushioning of Under ground cable including spreading and punning down to desired thickness complete all as specified and as directed. (Note: Punned thickness shall be measured for payment purpose) |
| 135 | Supply and laying 40 mm bore galvanised GI tubing, light grade with all fittings for passing of UG cables including taking up / down old unserviceable tubing complete all as specified and as directed. |
| 136 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and as directed. |
| 137 | Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed. |
| 138 | M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in filling in road cutting complete all as specified and as directed. |
| 139 | Removing excavated material to a distance n.exc 50M and deposited where directed complete all as specified and as directed . Please Enable Macros to View BoQ information |
