|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed. |
| 2 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 3 | Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) including 2 Nos of 6mm dia bars at every fourth course of brick work complete all as specified and as directed. |
| 4 | Demolition of cement concrete reinforced in any position not otherwise specifically provided for and removal of rubbish from the site complete all as specified and as directed. |
| 5 | M & L for reinforced cement concrete 1:1.5:3 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 6 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed. |
| 7 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface of concrete complete all as specified and as directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing unserviceable tiles and rubbish off the premises complete all as specified and as directed. |
| 9 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I). |
| 10 | Material & Labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including rendering of 10mm thick in Cement Mortar 1:3 complete all as specified and as directedNote: The colour / shade / design of tiles shall be as approved by GE. |
| 11 | Material & Labour for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I). |
| 12 | Material & Labour for joint free glazed ceramic coloured tiles 450 x 350 x 7 mm thick of premium quality as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I). |
| 13 | Material & Labour for Granite Stone Slabs of 20 mm thick as in Steps, Jambs, Pillars, Window Cills, Cooking Platform etc. and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of the Granite Slabs including screed bed of 20 mm thick in Cement Mortar 1:6 complete all as specified and as directed. |
| 14 | M & L for machine cut Kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:3 complete all as specified and as directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and paving n.exc.15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed. |
| 16 | Material and labour for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) laid in bays as in subbase of floor finished the surface fair and even complete all as specified and directed. |
| 17 | Material and labour pre polished, precast Chequered cement concrete tiles of size 250mmx250mm of 22mm thick as in floors set , jointed & pointed with neat cement slurry with white cement and pigment including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and as directed. |
| 18 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed. |
| 19 | Supply and fixing suspended false ceiling using E-grid 2430 180 GSM (exposed ceiling suspension system) of grid size 600mm x 600mm with main runner 38mm x 24 mm and wall angle 24mm x 24 mm using 4 mm thick High Pressure Non asbestos Fibre Cement pre painted decorative board (E-board Classic) in a grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffusers and ducts, sprinkler, smoke detectors etc. The main runner to be secured to structural soffit by hangers @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450 mm from the adjascent wall, Flush fitting 1220 mm cross Tee to be interlocked between main runners @ 610 mm c/c so as to form 600mm x 600mm grid complete all as specified and as directed. |
| 20 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed. |
| 21 | Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 22 | Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed. |
| 23 | Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and as directed. |
| 24 | Material and labour for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed. |
| 25 | Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 26 | Material and labour for preparation of old decorated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 27 | S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 28 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 29 | Supply and fixing 4 mm thick,Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed. |
| 30 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed. |
| 31 | Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed.(Note:Water proofing compound shall be measured & paid separately) |
| 32 | Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 33 | Supply only integral water proofing compound (WPC) of best quality (ISI marked) complete all as specified and as directed. |
| 34 | Material and labour for preparation of newly plastered surface and two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of primer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete as per manufacturer's specification complete all as specified and as directed. |
| 35 | Material and labour for perperation of new wall surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 36 | M & L for Complete removal of existing treatment of any description on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over a coat of primer over plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete as per manufacturer's specification complete all as specified and as directed. |
| 37 | M & L for Complete removal of existing treatment of any description on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. |
| 38 | Material and labour for preparation of old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 39 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 40 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. |
| 41 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and directed. |
| 42 | Supply and fixing 3mm thick sheet Glass ordinary quality in squares not exceeding 0.5 Sq.m and glazing with oil putty in each pane complete all as specified and as directed. |
| 43 | Taking down shutters of any description not exc 1.00 Sqm each complete all as specified and as directed. |
| 44 | Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm each complete all as specified and as directed. |
| 45 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 46 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded decorative coloured laminates PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and decorative coloured laminates PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail or bottom rail ; panelling of decorative coloured laminates PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC laminated sheet beeding, and joined together with solvent cement, supplying and fixing in the frame at the site as per specification complete all as specified and as directed. |
| 47 | S & F Factory made, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 48 | Supply & Fixing 30mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed. |
| 49 | Supply and fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 50 | Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 51 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall bepaid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 52 | S & F Aluminium Powder Coated Three Track window (2 glazed & one gauze shutter and aluminium sections weighing not less than 0.55kg/m for shutter) including necessary Jointing Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as Locking Arrangement, rollers complete all as specified.Note: (a)The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.[b] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, 5mm thick glass and Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks, or Stainless stee staples, fittings such as locks etc. |
| 53 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as diretced. |
| 54 | Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 55 | Supply and fixing 100 mm size, Heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 56 | Supply and fixing 75 mm size, Heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed. |
| 57 | Supply and fixing 250mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed. |
| 58 | Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 75 mm long complete all as specified and as directed. |
| 59 | Supply and fixing extruded aluminium alloy handles,fabricated type, anodised 100mm size complete all as specified and as directed. |
| 60 | Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed. |
| 61 | Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed. |
| 62 | Supply and fixing in repairs Harrison Rails [Curtain Rails], Chromium plated, 20 mm dia alongwith 02 Nos. brackets, stops, rollers etc complete all as specified and as directed. |
| 63 | Supply and fixing in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, anti syphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed. |
| 64 | Supply and fixing in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap including making good the disturbed floor complete all as specified and as directed. |
| 65 | Supply and fixing in repairs 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge. |
| 66 | Supply and fixing in repairs of 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 67 | Supply and fixing in repairs of Stop Valves, 15 mm bore dia of pipe, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions etc complete all as specified and as directed. |
| 68 | Supply and fixing in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed including three joints to steel pipes or unions and plugging and screwing to walls complete all as specified and as directed. |
| 69 | Supply and fixing in repair Rotational Moulded Polythene [HDPE] Water Tanks, ISI Marked, Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 20mm/15mm dia spouts for connecting inlet, outlet, over flow and washout pipes, Ball Valves, 20 mm Bore, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe [Minimum Weight 20mm - 210 Grams] etc. complete all as specified and as directed. |
| 70 | Supply & fixing in repairs gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 71 | Supplying and laying GI tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing including taking down old U/S existing GI tubing complete all as specified and as directed. |
| 72 | Supplying and laying GI tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc laid in floors/ fixed on walls including testing including taking down old U/S existing GI tubing complete all as specified and as directed. |
| 73 | Supply and fixing in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed. |
| 74 | S & F in repairs PTMT Grating Doom, 100 mm dia [Minimum weight 25 Grams] without waste hole or with waste hole to insert waste pipe complete all as specified and directed. |
| 75 | Supply and fixing in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and as directed. |
| 76 | Supply and fixing in repair of Stainless steel kitchen sink with drainage board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe overall size 915mm x 460mm and bowl size 410mm x 330mmx 160mm depth complete all as specified and as directed . |
| 77 | Suppy & fixing as in repair Vitreous China Ware Wash Hand Basin with padestal, White, Flat Back of size 550 mm X 400 mm including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings, 32mm bore PVC flexible waste pipe with PTMT check nut and union etc. complete all as specified and as directed. |
| 78 | Supply and fixing in repairs Vitreous china Toilet Paper Holder with CP brass screws complete all as specified and as directed. |
| 79 | Supply and fix in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed. |
| 80 | Supply and fixing in repairs looking mirror of size 600mm x 450mm x 5mm thick bevelled edge of selected quality glass, decorative type mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 81 | Supply and fixing in repair of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including fixing arrangement complete all as specified and as directed. |
| 82 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed. |
| 83 | Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LS) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LS) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. |
| 84 | All as per item No 83 above but for 3 pin,5 Amp switch Socket combination on independent board complete all as specified and directed. |
| 85 | All as per item No 83 here in before but for one 3 pin 15 Amps switch socket combination on independent board with 2.5 sqmm PVC (FR-LS) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LS) copper conductor cable as earth continuity conductor. |
| 86 | Supply & fixing Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal complete all as specified & as directed. |
| 87 | Supply & fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified & as directed. |
| 88 | Supply and fixing in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of 20 W, 6500 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 89 | Supply and fixing in repairs Square recessed mounted Flat Panel LED Light of 36 Watt suitable for fixing in 2' X 2' Grid False Ceiling, 6500 K, with high transmitive diffuser for soft-light and glare free symmetrical illumination with all accessories internally prewired and including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 90 | Supply and fixing in repair Integrated LED Bulk head with luminaire of 10W, 6000 K with Pressure Die Cast Aluminium Housing, IP54 protection, heat resistant glass cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 91 | Supply and fixing in repair Decorative LED wall mounting, Champagne gold finish fixture with plastic body of 9 W, Base type B-22 LED lamp complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 92 | Supply & Fixing exhaust fan made of sturdy engineering plastic 300mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with 3 core flexible copper cable including making holes on the wall and making good to the disturbed surfaces complete all as specified and as directed. |
| 93 | S & F Exhaust Fan, 300mm Sweep, 1200 RPM, Metal Body, Heavy Duty, with Double Ball Bearing, Conforming to IS - 2312, ISI Marked, suitable for operation on Single Phase, 240 Volts, AC, 50 Hz, including Louvers Shutter / Grill, BEE 5 Star Rated and of approved colour including connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. |
| 94 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified and directed. |
| 95 | Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 62.5mm x 50mm, ISI marked three terminals complete all as specified & directed. |
| 96 | S & F Energy efficient, BEE 5 Star rated Storage type Water Heater [Geyser] 25 Litres Capacity with 2000 Watt Capacity heating element Conforming to IS - 2082, Vertical Storage type with Stainless Steel Inner Tank and ABS Outer Shell complete fixed to wall with suitable expansion fasteners including 02 Nos. of 450 mm long x 15mm dia Stainless Steel braided Flexible Hot & Cold Water connections and 15mm bore Non-Return Valve complete all as specified and as directed. |
| 97 | S & F SP & N Enclosure with 2 Pin and Earth Metal Plug & Socket for incorporating SP MCB complete including One MCB, SP, 20 Amps, 240 Volts complete all as specified and as directed. |
| 98 | Supply and fixing in repairs of MCB DB TPN 4 ways, powder coated, double door, 415 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed. |
| 99 | Supply and fixing in repairs of MCB DB SPN 8 ways, powder coated, double door, 230 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed. |
| 100 | Supply and fixing in repairs of MCB DB SPN 2 ways, powder coated, double door, 230 Volts, including bus bar neutral link, earth bar and din rail, for fixing MCB of various rating complete all as specified and as directed. |
| 101 | Supply & Fixing of MCB TPN of capacity 40-63 Amps, 415 V, 10 KA 'C' curve complete all as specified and directed.. |
| 102 | Supply & Fixing of MCB SP of capacity 6-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 103 | Supply & Fixing of MCB DP of capacity 40-63 Amps, 415 V, 10 KA 'C' curve complete all as specified and as directed.Note for serial Item No. 97 to 103: MCB and MCB DB shall be of same make as approved by AGE (I). |
| 104 | Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed. |
| 105 | S & F Energy efficient Bollard, of not less than 9 watt, 5700 K, with Pressure Die Cast Aluminium / Poweder Coated CRCA Sheet Housing, with Opal Acrylic Diffuser, IP65 Protection, electronic driver, all accessories internally prewired and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 106 | Supply and fixing in repair LED Energy efficient decorative Post Top Lantern of 15 watt, 5700 K, with Pressure Die Cast Aluminium Housing,with Opal Acrylic Diffuser, IP65 Protection, electronic driver, all accessories internally prewired and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95 |
| 107 | S & F in repair 1.5 sqmm 3 core, PVC insulated and sheathed copper flexible cable black including PVC conduit pipe and fittings complete all as specified as directed. |
| 108 | Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC rigid conduit of adequate size with all accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description complete all as specified as directed. Note : (i) 3 Runs of 6.0 Sqmm cable and one run of PVC rigid conduit of adequate size shall be measured as one unit length. |
| 109 | Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 16 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old unserviceable cable complete all as specified and as directed. |
| 110 | Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. Please Enable Macros to View BoQ information |
