|
| 1 | Schedule 'A' Part-I (B/R itmes)Dismantling of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar, etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | Material and labour for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 3 | Material & Labour brick work with sub class -B bricks, in half brick thick walls, built in cement moratr 1:4 straight or curved on plan to any radius , ,complete all as specified and directed. |
| 4 | Dismantling stone slab of any description or thickness laid, bedded and pointed in any motar in floors etc ,complete all as specified and directed. |
| 5 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for, ,complete all as specified and directed.(Reinforced cut to facilated dismentling) |
| 6 | Material & Labour for Reinforced cement concrete design mix M-25 using 20mm graded stone aggregate, as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likedack slab , ,complete all as specified and directed. |
| 7 | Material & Labour TMT steel bars 10mm dia and over cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia , ,complete all as specified and directed. |
| 8 | Material and labour TMT steel bars 5mm dia and over up to and including 10mm dia in stirrups, spacers etc, cut to length, bent to shape reqd incl cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 9 | Cutting chases to brick wall built in cement mortar, pinning in making good to facing where required and pointing in CM 1:3 to edges of landing , steps , cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting not exc 10 cm girth ,complete all as specified and directed. |
| 10 | Material & Labour for Granite (of any type) slab 18-20 mm thick machine cut ,bedded and jointed with gray cement slurry and pointed with white cement as in floors/ cooking plateform, with admixiture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in CM 1:6 ,complete all as specified and directed. |
| 11 | Material & Labour for Granite (of any type) slab 18-20 mm thick machine cut , jointed with gray cement slurry and pointed with white cement as in vertical surfaces / dado / skirting with admixiture of pigment to match the shade of granite stone indluding grinding and polishing complete over and including 10 mm thick backing coat in CM 1:4 ,complete all as specified and directed. |
| 12 | Material & Labour rounding to edges of stone slab both edge such as in steps, cooking plateform and other similar situtaions with grinder, ,complete all as specified and directed. |
| 13 | Dismantling floor,hearth or wall tilling including cement mortar bedding (but not backing ),removing serviceable tiles to store and rubbish off premises , ,complete all as specified and directed. |
| 14 | Demolition of cement concrete (unreinforced) of any description and in any position including any type of sunken treatment , roof treatment, PCC padding, roof PCC tiles, lime concrete etc. , ,complete all as specified and directed.Note: All Demolished material / debries will be taken by the contractor out side of the cantonment without any extra cost to the govt,contractor should quote his rate Keeping this aspect in mind. |
| 15 | Material & Labour non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6 ,complete all as specified and as directed. |
| 16 | Material & Labour for non–skid ceramic coloured out door tiles10mm thick (square /rectangular) area of each tiles exe 0.18 sqm but n exe 0.38 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat with cement mortar (1:4) complete all as specified and as directed . |
| 17 | Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 450 x 7 to 8 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 18 | Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm but n.exc. 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 ,complete all as specified and as directed. |
| 19 | Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 18 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 20 | Material and labour for 25 mm thick PCC 1:2:4, type B0 as in sub base of floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed.Note- This item shall not be executed in the location, where dismantling of tiles only have been done. |
| 21 | Material and labour for 8 to 10mm thick heavy duty (digital) vitrified coloured paver tiles of size 300mm x 300mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) , complete all as specified and as directed. Make: Endura of Johnson or Durastone of Somany or equivalent make given in App ‘B’ |
| 22 | Material & Labour 100 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement ,complete all as specified and as directed. |
| 23 | Material & Labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement ,complete all as specified and as directed. |
| 24 | Material & Labour machine cut kota stone slab 18 to 22 mm thick of size not less than 550mm x 550mm in floor, set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed . |
| 25 | Material & Labour machine cut kota stone slab 18 to 22 mm thick ( kota stone shall be cut from size not less than 550mm x 550mm) in skirting , set and jointed in neat cement slurry with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick rendering in CM 1:4 ,complete all as specified and as directed. |
| 26 | Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed. |
| 27 | Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed. |
| 28 | Taking down shutters of any description area exceeding 01 sqm but not exc 2 sqm each and removing the same from site complete all as specified and as directed. |
| 29 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 30 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) ,complete all as specified and as directed. |
| 31 | Supply and fixing factory made single extruded WPC (Wood Polymer Composite) glazed and skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) ,complete all as specified and as directed. |
| 32 | Supply and fixing double shutter steel window box type ERW hollow P section comprising of glazed and gauged skeleton shutter fabricated from following sections :–(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces.(b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leaf of T – section 20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf.(c) Vertical mullion shall be ERW hollow T –section of size 60 x 25 mm made from 1.25 mm thick MS sheet(d) The above steel window shall be deemed to include the following accessories/ fittings :i) Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape– 04 Nos per windowii) Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled 150mm long– 2 Nos per leaf.iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf.(v) Cleat 55 mm long of solid square 15x20x.63mm square – 01 No per leafvi) Pintal hinges 12 x 75 mm – 2 Nos each leafvii) 10mm square Guard bar @ 10 cm c/c welded to frame.(viii) Two coat of Synthetic enamel paint over one coat of red oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter of window with flat iron 15 x 03 mm with steel screws.(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5 sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B–1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above.(iii) The window upto 1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable. The window more than 1.00 metre width shall have two openable leaves on both outer side for gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 33 | Supply and fixing box type using ERW hollow 'P' section ventilators fixed type with glazing bar including MS grills of square bar 10mm dia @ 100 c/c complete with glazing bars dovetailed or welded, including two coat of synthetic enamel ordinary tint paint over a coat of red oxide primer, ,complete all as specified and as directed. |
| 34 | Material & Labour sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane, ,complete all as specified and directed. |
| 35 | Material and labour for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts complete all as specified and as directed. |
| 36 | Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, ,complete all as specified and directed. |
| 37 | Supply and fixing mild steel door shutter two leaves with frame of 20 gauge MS sheet (all around) and leaves of 21 gauge MS Sheet (all as per godrej pattern) with three way locking arrangement with brass lock with duplicate key and CP handle including two coats of spray painting over a coat or red oxide primer complete fixed in existing cupboard fixed with necessary nuts, bolts including embedded in PCC 1:2:4 (area of opening shall be measured), complete all as specified and as directed. |
| 38 | Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed ,,complete all as specified and as directed. |
| 39 | Supply and fixing 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed ,,complete all as specified and as directed. |
| 40 | Supply and fixing 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter ,,complete all as specified and as directed. |
| 41 | Supply and fixing 150 mm long aluminium handle cast type anodised complete all as specified and as directed. |
| 42 | Supply and fixing mild steel butt hinges 100 mm long medium weight and fixed complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate including welding or screwing to MS frame complete all as specified and directed. |
| 44 | Supply and fixing of butt hinges 100mm long of stainless steel, medium weight, complete all as specified and as directed. |
| 45 | Material & Labour for forsted sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directe. |
| 46 | Supply and fixing galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple , complete, all as specified and as directed. |
| 47 | Supply and fixing stainless steel curtain rod 25mm dia having wall thickness 1.00mm fixed with and including stainless steel decorative brackets, two lotto for each rod length at both end etc as in repair complete all as specified and as directed. |
| 48 | Dismantling of boarding of any description and in any position of any size complete all as specified and as directed. |
| 49 | Supply and fixing for stainless steel 304 grade wire basket cutlery of size 370 x 485mm premium quality fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 50 | Supply and fixing for stainless steel 304 grade wire basket (average weight 2.5 to 4 Kg per Basket) of pull out type like plain /cup & saucer /bottle /multi purpose /2–3 shelf basket etc for kitchens of required size fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 51 | Supply and fixing for Ball bearing runners 45mm telescopic (KTS–20) full extension load capacity minimum 50Kgs complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 52 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finished complete all as specified and directed. Make: HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 53 | Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed. Make : HETTICH, KAFF, GLEN, HARRISON and GODREJ. |
| 54 | Material and labour for 18 mm thick HDHMR board coloured prelaminated one side and other side plain (density over 850Kg/Cum, fixed with screws for kitchen cupboard and cabinet, shelves for cupboard, frame with door if required including 1mm thick pvc patti on cut edge of boards complete all as specified and as directed . Make :- Action Tesa, Century ply, Greenply |
| 55 | Supply and fixing PVC connections 15 mm size and 600 mm of length with PTMT nuts and PVC washers on both ends as in repair complete all as specified and as directed. |
| 56 | Supply and fixing as in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 57 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed . |
| 58 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 59 | Material and labour for galvanised iron tubing 15mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 60 | Material and labour galvanised iron tubing 20 mm bore, ISI marked, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed. |
| 61 | Supply and fixing as in repair bib tap 15mm bore fancy type brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 62 | Supply and fixing bib tap 15mm bore fancy type brass chromium plated with long body, ISI marked, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 63 | Supply and fixing fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and as directed. |
| 64 | Supply and fixing 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, scrwed both ends for iron pipe or for unions ,complete all as specified and as directed. |
| 65 | Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and as directed. |
| 66 | Material and labour for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 67 | Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and as directed . |
| 68 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges complete all as specified and as directed . |
| 69 | Supply and fixing as in repair 15mm bore cast copper alloy chromium plated angular stop valves, ISI marked, screwed down, high pressure with capstan head, screwed down both ends for iron pipe or for unions complete all as specified and as directed. |
| 70 | Supply and fixing 15mm bore cast copper alloy chromium plated angular stop valves, ISI marked, screwed down, high pressure with capstan head, screwed down both ends for iron pipe or for unions complete all as specified and as directed. |
| 71 | Supply and fixing for chromium plated double lever sink mixer (hot and cold) with out popup and 450 mm long braided hoses complete all as specified and directed |
| 72 | Supply and fixing of corner Glass shelf 300 mm (with brass bracket) including fixing with brass screws to wall complete fixed as in repair complete all as specified and as directed.Make- KICH Cat No- GSC 1155 or eqv /Prayag) |
| 73 | Supply and fixing of brass chromium plated hand shower ( health faucut) with 8 mm dia 1.2 mtr long flexible tube and wall hook with NRV ( back flow preventer )complete fixed to wall complete fixed as in repair complete all as specified and as directed.Make : Jaquar Cat Part No : ALD577 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA. |
| 74 | Supply and fixing of brass chromium plated hand shower ( health faucut) with 8 mm dia 1.2 mtr long flexible tube and wall hook with NRV ( back flow preventer )complete fixed to wall complete fixed complete all as specified and as directed.Make : Jaquar Cat Part No : ALD577 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA. |
| 75 | Supply and fixing of counter top vitreous china wash hand basin white with 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting, etc. as in repair complete all as specified and as directed . Make : CERA Cat part No.S2020137 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA. |
| 76 | Supply and fixing of single piece water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, S or P Trap complete fixed as in repair complete all as specified and as directed. Make : CERA Cat part No.S1013209 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA. |
| 77 | Supply and fixing of brass CP toilet paper holder including fixing with brass screws to wall complete fixed as in repair complete all as specified and as directed. Make : Jaquar Cat Part No : ACN-11535 or equivalent makes mentioned in list of make attached as Appendix ‘B’ of CA. |
| 78 | Supply and fixing in replacement of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 79 | Supply and fixing of 600mmx450mm bevelled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 80 | Supply and fixing for cabinet type looking mirror size 450 mm x 300 mm box type complete all as necessary items complete all as specified. |
| 81 | Supply and fixing in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of grade SS304 of size 24\\"x30\\"x10\\" including screws and fixing arrangements , complete, all as specified and as directed. |
| 82 | Supply and fixing sinks with drainage board made out of stainless steel 1mm thick sheet for kitchen or laboratory with plugs, waste pipe, brass chromium plated coupling and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm as in repair , complete, all as specified and as directed. |
| 83 | Supply and fixing as in repair water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including disconnecting and dismantling of existing water tanks and removing from site all as specified in SSR Part–I , complete, all as specified and as directed. |
| 84 | Supply and fixing , water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union all as specified in SSR Part–I , complete all as specified and as directed.Note : - The colour of tanks shall be white colour . |
| 85 | Supply and fixing of 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, complete, all as specified and as directed. |
| 86 | Supply and fixing of 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair, complete, all as specified and as directed. |
| 87 | Supply and fixing of 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe , complete, all as specified and as directed. |
| 88 | Supply and fixing in repair grating doom 100mm dia of PTMT (minimum 25 gms) complete all as specified and directed. |
| 89 | Supply and fixing 25mm dia float valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (minium weight-210 grm) complete all as specified and as directed. |
| 90 | Supply and fixing of 32 mm dia PVC waste pipe of standard length for wash hand basin / Kitchen sink etc as in repair complete all as specified and as directed. |
| 91 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key scrubbing down with water, etc. complete all as specified and as directed. |
| 92 | Material and labour for rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar (1:4) and finished even and smooth without using extra cement, complete, all as specified and as directed. |
| 93 | Material and labour for rendering 15mm thick on any faces of brick work or concrete wall surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete, all as specified and as directed. |
| 94 | Material and labour for rendering 10 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar (1:3) and finished even and smooth without using extra cement complete, all as specified and as directed. |
| 95 | Material and labour for preparation of new plastered/unplastered surfaces of walls, chajjas, roof projection, etc. and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 96 | Material and labour for preparation of new plastered/unplastered surfaces and applying two coats of white lime wash on surfaces of walls, chajjas, roof projection complete all as specified and as directed. |
| 97 | Material and labour for preparation of new plastered/unplastered surfaces and applying three coats of white lime wash on surfaces of ceiling, chajjas, roof projection complete all as specified and as directed. |
| 98 | Material and labour for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of acrylic distemper with painting roller over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed. |
| 99 | Material and labour complete removal of existing treatment on walls, pillars, cornices etc (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and preparation of surfaces and applying two coats of acrylic distemper over and including 1 to 2 mm thick wall care putty white cement based in one or two coats to achieve smooth surfaces, complete all as specified and as directed. |
| 100 | Material and labour for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 101 | Taking down of PVC /cast iron/RCC drain pipes /rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal from site, jointed in cement mortar and taking out of trenches, complete all as specified and directed. |
| 102 | Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed..(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 103 | Supply and fixing 110 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and as directed. |
| 104 | Supply and fixing 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 105 | Supply and fixing 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 106 | Supply and fixing 75 mm bore UPVC (SWR), vent cowls including jointing with solvent cement, complete all as specified and as directed. |
| 107 | Supply and fixing 110mm bore PVC (SWR) junction single (Single T) equal or unequal with access doors complete all as specified and as directed. |
| 108 | Supply and fixing 75mm bore PVC (SWR) junction single (Single T) equal or unequal with access doors complete all as specified and as directed. |
| 109 | Supply and fixing PVC (SWR) reducer of 75 x110 mm bore complete all as specified and as directed. |
| 110 | Material & Labour Cast iron work grade FG 150, unmachined, in brackets, gully traps,gratings, railing, frames,manhole covers, fire and soot doors, dampers, stopvalve boxes, gate stops,parts of ranges, balusters and similar articles.each article exc. 5.0 KG, complete all as specified and as directed. |
| 111 | Cutting into existing manholes for connecting new drains, and making good to pipe and rendering, cutting out existing benching for and forming branch channel( 1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm size crushed stone aggregate) smooth finished and reforming benching as required of pipe 100 mm dia,,complete all as specified and as directed. |
| 112 | Material and labour for concrete bed in PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate to drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150 mm dia (internal) pipes complete all as specified and as directed by the Engineer-in-Charge. (Pipes shall be measured & paid separately). |
| 113 | Supply and fixing pre–painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having zinc coating 150 gm per sqm (Az–150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 114 | Supply and Fixing mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and as directed. |
| 115 | Demolition of mud in roofs, any thickness, including plastering and leeping (whethere full thickness removed or only a part thereof) including emoving old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work , complete, all as specified and as directed. |
| 116 | Material and labour PCC 1:5:10 type E-2, using 40 mm graded crushed stone aggregate as in filling in sunken floor, rounded or chamfered on edges , complete, all as specified and as directed. Please Enable Macros to View BoQ information |
| 117 | Material and labour PCC 1:5:10 type E-2, using 40 mm graded crushed stone aggregate as in filling in sunken floor, rounded or chamfered on edges , complete, all as specified and as directed. Please Enable Macros to View BoQ information |
