|
| 1 | Dismantling Brick masonry in Cement mortar walls under 3m high Clearing away and throug away from the site etc., complete complying with standard specification |
| 2 | Brick work in following Cement Mortar 1:5 using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge. |
| 3 | First floor |
| 4 | Second floor |
| 5 | Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 6 | Ground floor |
| 7 | First floor |
| 8 | Second floor |
| 9 | Third floor |
| 10 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 11 | Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Three panels openable type window wth Aluminium Grill 10 mm thick in all floors with aluminium sections ofOuter frame: 37.70x33x2mm @ 0.50 kg/m, Centre mullions:59x33x2.50mm @0.936 kg/m,Shutter frame : Z section 24.50x33x3mm @ 0.525kg/m,Aluminium clips:0.109 kg/m with neccessary accssories such as rubber beadings, special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary with power drills to the required extent and make good to the original conditons after fixing and also as directed. All the Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance with Is 1868/1962 for an average anodic film thickness of 15 microns etc.Complete. |
| 12 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 13 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete |
| 14 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 15 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 16 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed. |
| 17 | Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes,scaffolding arrangements, labour charges, etc., as per standard specification and as directed by the departmental officers. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work) |
| 18 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat of over cement plastered wall surface etc., complete complying with standard specification. |
| 19 | Painting New iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 20 | Painting two coats over old iron works such as steel doors, windows, ventilators, window bar balustrades etc., with best approved first quality synthetic enamel paint of approved colour in all floors. The rate is inclusive of all materials, brushes and scaffolding charges etc., complete. |
| 21 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 22 | Providing Black board in two layers with first layer in cement mortar 1:5 (one cement and five crushed stone sand)20mm thick and the second layer in Combination mortar 1:1:6(one cement one lime and six crushed stone sand) 20mm thick and providing band all round the block board in c.m 1:5 (one cement and five crushed stone sand) for 20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying with standard specification. |
| 23 | Hire charges for Closing the glazed doors and windows in Strong room using 12 mm plywood sheet and strengthening the same with countrywood reeper 2\\"x1\\". The entire cost should be borne by the contractor himself and the work should be completed. After the counting is over the same same protection should be removed as directed by the departmental officers |
| 24 | Hire Charges for Providing Counting Centre Room, Inner Barricading for fixing weldmesh supporting arrangements using 8 to 10cm dia casurina post for vertical at an interval of 1m c/c upto Room height incl. diagonal bracings and 5cm to 8 cm dia casurina post of horizontal ties and tying with coir nails etc., and including all Labour charges and removing the same after the work is completed as per standard speicification and as directed by the deparmental officers.etc complete |
| 25 | Hire charges for supplying and fixing weldmesh partition using 7.5cmx2.5cm 10 Gauge weld mesh for partition panel. The outer frame & diagonal members are using CW scantlings of size 75 x 50mm incl. fixing rigidly both CW scantlings & weld mesh partition with the existing casurina props incl. nails, binding wire fixing charges & conveyance charges & removing the same after the counting is over etc., complete as directed by the departmental officers.-Using Weld Mesh |
| 26 | Hire Charges for providing closing the window in outer side of building in second floor using of GI Sheet fixed in plywood frames of 19mm thick to a width of 75mm with nails, etc.. |
| 27 | Supplying and fixing of Plain Glass of 5.50 mm thick and including cost of labour and materials etc.,The Glass and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete as per standard speicification and as directed by the departmental officers. |
| 28 | Hire charges for providing outer barrigading arrangements using Metal barricading units of size 10'x4' made up of Steel Pipes of dia not less than 50 mm dia removing the same after the work is completed as per standard specification and as direction of the departmental officers etc., Complete |
| 29 | Hire charges for materials and cost of labour for erection of HIPPED ROOF RAIN PROOF G.I.SHEET PANDAL using tubular post of 200mm dia at 20' centre to centre and middle span of 80'. The tubular postare connected with 100mm dia pipe truss for a span of 80'. The entire roof of the pandal are coveredwith 0.6mm thick G.I. Corrugated sheet with proper special type clamps and nails. THe rate is inclusive of removing the pandal after function is over etc., Complete complying with standard specificatin and as directed by the departmental officers. |
| 30 | Engaging labour for Transporting the desks, benches, tables, library racks and other materials from the existing class rooms to the College Storage rooms / Workshops and to a distance of 300-400 mtrs from the counting centre / storage halls and refixing the same in the previous locations after the work is completed as directed by the departmental officers etc.,complete. |
| 31 | For Carpender I Class |
| 32 | For Mazdoor I-class |
| 33 | For Mazdoor II Class |
| 34 | Hire charges for providing checking booth of size 1.50m x 1.50 m and height of 2.10m using 8 to 10 cm dia casurina props for vertical member and 5 to 10 cm dia casurina props and 5 to 8 cm dia for horizontal and diagonal member and using white cloth for covering four sides including cost and labour etc. removing the same after the work is Completed as per standard specifications and as directed by the departmental officers etc., complete. |
| 35 | Providing Steel flat of 50 x 6mm size for Strong room door Additional Locking arrangements with providing Lock holes and fixing to wall with bolt of size 16mm dia with necessary threads and drilling wall, fixing plats etc., complete as directed by the departmental Officers. |
| 36 | Supplying and fixing in position of pin heated glass in 4mm thick including cost of materials & labour charges etc., |
| 37 | Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run. |
| 38 | Supplying and painting three coats with ready mixed UV resistant fibre reinforce elastrometric rubberized water proof coating over water pfoofing priming fibre reinforced elastrometric coat of damp seal of approved quality and colour which shall resist 10 bars of water pressure as per DIN 1048 Standards with elongation of 350% as per ASTMD412 and crack bridging of upto 2.5mm conforming to ASNZ standards including cost of all materials etc. complete and as directed by the departmental officers |
| 39 | Hire charges for Supply and fixing wooden platform with necessary base steel section and steps top closed with 19mm plywood sheet. |
| 40 | Hire Charges for providing open area enclosures using of Precoated GI Sheet fixed of 0.80mm thick (22 Kgs) fixed in casurina poles of size 10 to 13cm dia in vertical @ 90cm c/c and 8 to 10cm dia casurina poles in Horizontal at 120cm c/c to a required height of 8m with nails, coir ropes for stage using GI corrugated sheets etc. removing the same after the function is over etc.., complete complying with standard specifications as directed by the departmental officers. etc., complete. |
| 41 | Supplying and fixing in position of class Room stage of size (5.10m x 2.40m) for a height of 0.30m using 19mm thick ply wood including cost of ply wood, nails, etc., Labour for fixing in position and top finishing with Vinyl matt flooring etc.,as per standard specification and as directed by the departemental officers |
| 42 | Providing Window Screen to a Size of 1.80 x 1.50m with necessary hooks, wall rail and cost of fixing, stiching this screen alround. The cloth colour and design as been approved by the departmental officers |
| 43 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \\"B\\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 44 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 45 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works). |
| 46 | Supplying and fixing CP Two Way Bib Cock with Health Faucet including cost of fixing charges etc., complete |
| 47 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works). |
| 48 | Supply of locks with 3 keys 7 Levers of heavy quality use for office/ home door lock of anti corrosion, durable, rust ressistant etc., complete compling with standard specification and as directed by the departmental officers. |
| 49 | Supply of Postal Balat Counting tray of size 2' x 1' 6\\" for a depth of 6\\" and 12 small compartments using 12mm thick ply wood including cost of Wrought and Putup etc., complete complying with standard specification and as directed by the departmental officers etc., complete |
| 50 | Hire charges for Sign board of size 2' x 1' 6\\" using 12mm thick & 20mm thick ply wood including cost of Wrought and Putup and removing the same after the work is completed as per standard specification and as directed by the departmental officers etc., complete. |
| 51 | Supply of 120 liter capacity of PVC Dustpin arrangements etc., complete compling with standard specification and as directed by the departmental officers. |
| 52 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 53 | 75mm dia PVC soil / waste pipe |
| 54 | 110mm dia PVC soil / waste pipe |
| 55 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... |
| 56 | Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level. |
| 57 | For laying UPVC pipes of dia 32 mm |
| 58 | For laying UPVC pipes of dia 40 mm |
| 59 | Supplying and fixing of Rain Proof padutha Polythene of size (20' x 40') in corridor openings including cost of fixing and labour charges and as directed by the departmental officers complete. |
| 60 | Hire charges for Stainless steel Wash basin of size(6' x 1'6\\") arrangements consisting of 5 taps including inlet and outlet connections from the existing tank etc., and removing the Wash basin after the work is completed as per standard specification and as directed by the departmental officers. etc complete |
| 61 | Hire charges for Plastic chairs with arms including cost of conveyance charges and removing the same after work is Completed as directed by the departmental officers etc., complete. |
| 62 | Hire Charges for SS Dinning Table of size (6' x 1 1/2' x 2 1/2') including cost of Conveyance charges etc., and removing the same after work is Completed as directed by the departmental officers etc., complete. |
| 63 | Hire Charges for S Type chairs made up of steel pipe with wooden armrest. This seat and backrest made of polythene plastic wire including cost of conveyance etc., and removing the same after work is Completed as directed by the departmental officers etc., complete. |
| 64 | Hire charges for supplying of Cushion sofa Set (3seater 1 no, single seater 2 no's) with resin cloth and wooden hand rest with wood finishing including cost of transporting charges etc., removing the same after work is completed and as directed by the departmental officers etc. complete. |
| 65 | GST Please Enable Macros to View BoQ information |
