|
| 1 | Demolishing laterite stone masonry in cementmortar including stacking of serviceablematerial & disposal of unserviceable materialwithin 50 mts. lead. |
| 2 | Dismantling asbestos sheet roofing including ridges, hips valley and gutters and stacking the material within 50 meters lead. |
| 3 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. + Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level. |
| 4 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) |
| 5 | c)In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 6 | Centering & shuttering including Strutting, Propping & removal of forms for : |
| 7 | iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 8 | a) Providing and fixing colour coated galvuliumroofing sheets of 0.5mm thickness including allthe accessories (TATA make) but excluding thecost of purlins, rafters, trusses, flashings etc.complete as per the directions of the Engineer incharge. |
| 9 | c)Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge. |
| 10 | Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hotdipped galvanized steel sections (galvanizing @120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked atmiddle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl] plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles ofapproved texture light fittings, fixture, smokedetectors etc., wherever required. Main \\"T\\"runners to be suspended from ceiling using G.I.slotted cleats of size 25x35x1.6mm fixed toceling using with 12.5mm dia and 50mm longdash fastners, level clips of size 85x30x0.8mm,spaced at 1200mm center to center along main\\"T\\" bottom exposed with 24mm of T-sectionshall be pre-painted with polyester baked paint,for all heights, as per specifications, drawingsetc. complete. |
| 11 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 12 | UPVC Partition Including Accessories |
| 13 | Solid core PVC moulded door in prelaminated colour of make Rajshri Plastiwood or equivalent including accessories |
| 14 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 15 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 16 | Providing and and laying scratch resistant floor tiles in different sizes of Johnson, Somany,Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc.,complete |
| 17 | b 600 x 600 mm light Shades |
| 18 | Finishing fine with neeru over plaster |
| 19 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
| 20 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 21 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. Please Enable Macros to View BoQ information |
