|
| 1 | SUB HEAD::DISMANTLING ITEMS:Demolishing cement concrete 1 : 3 : 6 or richer mix including disposal off material within 50 metres lead |
| 2 | Dismantling GI sheet roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 m lead. |
| 3 | Dismantling cement, asbestos, celotax or other ceiling or partition hard board partition wall including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead. |
| 4 | Dismantling wood work of sectional area 40 Sq.cm. and above wrought, framed and fixed in frames, other frames and trusses including stacking the material within 50 m lead. |
| 5 | Demolishing RCC work including stacking of steel bars and disposal of un-serviceable materials within 50 metres lead |
| 6 | Demolishing brick work in cement mortar including stacking of serviceable material and disposal of unserveable material within 50 metres lead. |
| 7 | Dismanling doors, Windows and clereystory windows (steel or wood) shutters including chowkhats, architrave, hold fast etc complete and stacking within 50 m lead. A) of area 3 Sqm and below. |
| 8 | Dismantling steel work in built up section in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc including dismembering and stacking within 50 m lead. |
| 9 | SUB HEAD::SITE DEVELOPMENT : Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres) |
| 10 | SUB HEAD:: STRUCTURE BUILDING (G+1): Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 11 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 12 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 13 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.(Wall) |
| 14 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 15 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 16 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 17 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 18 | Providing reinforced cement concrete eaves board 25 mm thick and 15 cm to 30 cm wide inM 20 mix (1 cement : 1.5 coarse sand : 3 stone aggregate 10 mm nominal size) up to floor two level including finishing and plastering with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm on exposed surfaces to give smooth and even surface, centring and shuttering but excluding cost of reinforcement. |
| 19 | Reinforced cement concrete work in stair cases (excluding landing) except spiral cases including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, preparing of the top surface and finishing, nosing upto floor two level but excluding the cost of centring, shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 20 | Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 21 | Brick work with best available local bricks in plinth and in Superstructure in cement mortar 1:4 (1 cement : 4 fine sand). |
| 22 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
| 23 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 24 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 25 | Steel work in single section including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. b) In Tees, Angles and Channels |
| 26 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill. |
| 27 | Providing and fixing Staillness steel (Grade-304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, I/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in charge, (for payment purose only weight of stainless steel member shall be considered excluding fixing acessories such as nuts, bolts, fasteners etc). As per the instruction of Engineer. |
| 28 | Providing and laying in foundations and plinth cement concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
| 29 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.a) 50 mm thick |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including Grouting the joints with white cement and matching pigments etc, complete. d). Size of tiles 1000 x 1000 mm. (Main Building Flooring) |
| 31 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.( for WC & Bath floors&dado) |
| 32 | Granite stone slab 18mm thick (Black, Cherry Red,Elite Brown, Cat Eye or equivalent.) in flooring, skirting, tread & risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
| 33 | Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: b) Medium shade using approximately 50% white cement and 50% ordinary cement. (For Roof Terrace Floor Tiles). |
| 34 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor.b) 21 mm thick |
| 35 | Providing and laying damp proof course 50 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
| 36 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 37 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 38 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth. |
| 39 | Providing and fixing factory made solid flush shutter 38 mm thick and steel angle 30x30x5mm fasten with steel strip of 25mmx4mm, including steel chowkat and necessary iron fittings and screws including painting with smoke grey paint two or more coat above priming coat. |
| 40 | Providing and fixing Glazed or Alluminium window in steel frame of angle 45mmx 45mmx5mm in frame of 30x30x4mm fastened with bead/putty including steel chowkhat ,Gril& necessary fittings & screws as per design and drawing including painting with Red Oxide paints. |
| 41 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 42 | b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 43 | c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
| 44 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 45 | e) Column, pillars, posts and struts etc. GF |
| 46 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 47 | Neat cement punning. |
| 48 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 49 | Providing two coats of acrylic water based wall putty/wall filler of Asian Paint/Berger/Dulux over Concrete/Cement plaster/brick walls and ceillings both internal and external after removing all the loosely adhering materials from the wall/ceilling surface with the halp of emery ston, putty blades or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department or Engineer incharge. |
| 50 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 51 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 52 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 53 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 54 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 55 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 56 | Providing and fixing Durashine Zinc-Aluminium alloy coated (Tata Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. |
| 57 | Providing and fixing Durashine Zinc-Aluminium alloy coated (Tata Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses. |
| 58 | Providing and fixing 6 mm thick hard board sheet ceiling(WP) of approved quality with necessary nails etc. complete (frame work to be paid separately). |
| 59 | SUB HEAD:: Sanitary Installation: Construction of Septic Tank 3.8 mx2.8m x1.8m as per complete standard drawing & design. |
| 60 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mmdia 1.80 m long complete as per standard design. |
| 61 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid |
| 62 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required. |
| 63 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC.(250mmX130mmx30mm) |
| 64 | Providing and fixing sand PVC/cast iron/ cast iron (spun) soil, waste and vent pipes.Size 100mm Dia |
| 65 | Providing and fixing best quality PVC Elbow/Plain bend 100 mm dia (Inner) |
| 66 | Providing and fixing sand cast iron heel rest sanitary bend b) 100 mm dia |
| 67 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design. a) 100 mm dia SW pipes |
| 68 | Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.a) 100 mm dia SW pipes |
| 69 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
| 70 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 Flexible pipe(17.28.1.1) 32 mm dia |
| 71 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement : 5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg). |
| 72 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
| 73 | Providing and fixing on wall face PVC/C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).a) 100 mm diameter pipe |
| 74 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws |
| 75 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). |
| 76 | Providing and fixing toilet paper holder. |
| 77 | Providing and fixing hand spray (flexible) approved quality.15 mm nominal bore |
| 78 | SUB HEAD::WATER SUPPLY : Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls. a) 15 mm nominal bore(internal work). |
| 79 | b) 20 mm nominal bore(Externall work). |
| 80 | c)40 mm nominal bore( from Pump to OH Tank) |
| 81 | d) 50 mm nominal bore {From OH tank to UG Tank(wash out Pipe)& Feeding of Fire Hydrant for building} |
| 82 | e) 80 mm nominal bore ( For Feeding Fire tender Vehicles) |
| 83 | Providing and fixing brass stop cock of approved quality. a) 15 mm nominal bore(Internal) |
| 84 | b) 20 mm nominal bore(external) |
| 85 | Providing and fixing brass full way valve with wheel of approved quality. a) 50 mm nominal bore |
| 86 | b) 80 mm nominal bore |
| 87 | Providing and fixing brass bib cock of approved quality.15 mm nominal bore |
| 88 | Providing ,Fixing ,commissioning & testing of 2 H.P. 1 Phase pump(SWJ 1 ) including control Panel and all accesories or as directed by Engg. i/c |
| 89 | Providing and fixing in position Polyethylene water storage tank of 4 layer sintex at terrace floor for water supply |
| 90 | Providing & Fixing fire hyrant set comprising of Hose Box, RRL Hose Pipe 30 Mtrs long with G/M M/F coupling Banding, GM Branch Pipe & CI (M) Hydrant valve all accesories complete or as per direction of Engineer incharge. |
| 91 | SUB HEAD::FURNITURE : Manufacturing and supply of Best quality Wooden/Steel Cot (Single size including,moisquito stand and finishing with primer/paint/varnish of approved brand or as may be directed by Engineer incharge |
| 92 | Manufacture and supply of wooden table with mini cup-board as per drawing enclosed.( Medium Size) |
| 93 | Supplying best available supreme plastic visitor chairs. (Premium quality as per the engineer incharge). |
| 94 | Supplying Steel/Alluminium Water filter (30 Ltrs capacity) including transportation charges |
| 95 | SH: ELECTRICAL ITEMS:- Wiring for light point/ fan point/ exhaust fan point/ call bell point (excluding switch box, switches, sockets, lamp holders/ceiling roses etc) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface medium class PVC casing & caping and earthing the point with 1.5 sq.mm FRSL PVC insulated copper conductor single core cable etc. as required.Group A |
| 96 | Group B |
| 97 | Group C |
| 98 | Wiring for circuit/submain wiring alongwith earth wire with following sizes of FRSL PVC insulated copper conductor,single core cable in surface medium class PVC casing & caping as required. 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 99 | 2 x 10 Sq.mm + 1 x 10 Sq.mm earth wire |
| 100 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface medium class PVC casing & caping alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 101 | Supplying and fixing of follwoing way,single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar ,earth bar,din bar,interconnection,powder paintedd including earthing etc as required.(But without/MCB/RCCB/Isolator). 6 Way Double |
| 102 | 12 Way Double Door |
| 103 | Supplying and fixing of 6 A to 32 A rating,240/415 V 10 KA, ''C'' curve, miniature circuit breaker, single pole suitable for inductive load of following poles in the existing MCB DB complete with connection,testing and commissioning etc. As required.6 Amp Single Pole |
| 104 | 16 Amp Single Pole |
| 105 | Supplying and fixing of following rating, double pole, 240 V, Isolator in the existing MCB DB complete connections,testing and commissioning etc. As required.63 A Double Pole |
| 106 | Supplying and fixing of following modular plate and surface box etc. as required.1 Module |
| 107 | 2 Moudle |
| 108 | 3 Module |
| 109 | 4 Module |
| 110 | 6 Module |
| 111 | 8 Module |
| 112 | Supplying and fixing PVC box of following size on surface with all accessries etc. as required.8 x 6 x 2 Inch |
| 113 | Supplying and fixing 6 A modular type switch including connection etc. as required. |
| 114 | Supplying and fixing 16 A modular type switch including connection etc. as required. |
| 115 | Supplying and fixing of PVC ceiling rose on existing junction box/wooden block with all accessories etc. as required. |
| 116 | Supplying and fixing of 25 mm PVC square box with all accessories etc. as required. |
| 117 | Supplying and fixing of PVC batten/angle holder with all accessories etc as required. |
| 118 | Supplying of 12 Watt Ceiling Light |
| 119 | Supplying of 15 Ltr Geyser |
| 120 | Supplying and fixing of 15 Watt, 240 V, 50 Hz LED Bulb with all accessories etc. as required |
| 121 | Supplying and fixing of 20 Watt, 240 V, 50 Hz LED Tube with all accessories etc. as required. |
| 122 | Supplying,Installation,testing and commissioning of 1200 mm sweep,ceiling fan, suitable for 240 V, 50 Hz with regulator and the down rods of standard lenth (upto 30 cm) etc. complete as required. |
| 123 | Installation, testing and commissioning of exhust fan upto 450 sweep in the existing opening, including making the hole to suit the sizes of the above fan, making good the damage connections, etc as required. |
| 124 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 125 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper Wire in 15 mm dia G.I pipe from earth electrode including connection with G.I thimble excavation and re-filling as required. |
| 126 | Providing and fixing 25 mm X 5mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut,bolt,spring,washer excavation and refilling etc as reuired |
| 127 | Supplying and fixing of 100 A, 415 volts main switch with all accessories etc as required. |
| 128 | Supplying and fixing of 100 A, 415 volts Bus Bar with all accessories etc as required. |
| 129 | Supplying and fixing of 100 A, 415 volts Changeover with all accessories etc as required. |
| 130 | Supplying of 50 sqmm UG cable |
| 131 | Providing and fixing of lighting Arrester including holes etc complete as required. |
| 132 | Designing, Manufacturing and Supplying of LED based Solar Street Lighting System with 75 Wp SPV Module, 20W LED Luminaries with BMS, LiFePO4 Battery pack Rating 20-30Ah, with semi-integrated system with mounting structure & GI pole 5.6-6m i/c transportation, loading, unloading, stacking of materials & civil works with all accessories etc as required . |
| 133 | Supplying of villa LED Gate Light. |
| 134 | SH:- BOUNDARY WALL:- C/O Boundary wall 2.1 m high brick wall 15 cm thick Wall with RCC post(column) 20cmX20cm placed at every 3m apart, provided with broken sharp bottle at the top including 2 Nos. horizontal beams of 20 cmx20cm at ground level, MS angle iron of 40 x 40 x 5 mm bent up in two direction at top with rows of barbed wire, plastering with CM 1:4 at both sides,beams and column and also white washing with three coats i/c jungle clearance, earth works and all materias complete, as per standard Drawing & specification and as directed by Engineer in charge. |
| 135 | C/O Steel Gate 6 mtr with MS angle frame 50 X 50 X 5mm embedded on RCC post 50 X 50 Cm complete as per drawing and direction of engineer incharge . |
| 136 | SH:- HORSE DRYING TOWER: Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
| 137 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 138 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in:b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.(Wall) |
| 139 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone shingle 20 mm nominal size). |
| 140 | Reinforcement of RCC work including bending, binding and placing in position complete. |
| 141 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
| 142 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 143 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
| 144 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 145 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
| 146 | Providing & Fixing MS Pully |
| 147 | Providing & Fixing Steel wire 6mm dia |
| 148 | SH: BORE WELL: Transportation and erection of drilling rig 7 tools plants etc. at site and removal of same after completion of job. (Logistic Charges for location outside Itanagar/Naharlagun) |
| 149 | Boring of 9\\"dia Bore Hole in any kind of soil and supplying & Fixing 8\\" dia (MS/SPVC) pipe in Bore and developing Bore well for the depth of More than 100 mtrs and go on. |
| 150 | Supplying and fixing submersible Pump Kirloskar make 3.0HP & 3Phase discharge 32mm size and Head 500ft and supplying safety wire for hanging the submersible Pump, 3 core P.V.C cable , Panel board , Bore cap , clamp , adopter, Discharge 32mm dia from submersible Pump to over head Tank for the length of 30 ft from ground level. |
| 151 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling ete(external work).b)20 mm nominal bore |
| 152 | c)25 mm nominal bore |
| 153 | d)32 mm nominal bore |
| 154 | Providing and fixing brass stop cock of approved quality.c)25 mm nominal bore |
| 155 | d)32 mm nominal bore |
| 156 | SH: PAVER BLOCK CUM CC PAVEMENTS: Excavation in Soil by Manual Means. (Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.) |
| 157 | Preparation of sub grade (Preparation of sub grade by excavating earth to an average depth of 22.50 cm, dressing to camber and consolidating with road roller, making good the undulations etc. and disposal of surplus earth, lead upto 50 m.) |
| 158 | Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.) (Using Screening Crushable type such as Moorum or Gravel) |
| 159 | Providing and laying precast cement concrete Pavers block/interlocking above well developed/compacted hardsoil base. (Cost of developing of hard/compacted soil with layer of sand is to be paid seperately) |
| 160 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 161 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :a) Foundations and plinth |
| 162 | Centring and shuttering including strutting, propping etc and removal of form work for :a) Foundation, footings, bases of columns etc. and mass concrete. |
| 163 | SUB HEAD: CARTAGE/HAULAGE : Add for cement Ann-X |
| 164 | Add for MS rod Ann-X |
| 165 | Add for Bricks Ann-X |
| 166 | Add for Sand Ann-X |
| 167 | Add for Broken Aggregate Ann-X Please Enable Macros to View BoQ information |
