|
| 1 | SCHEDULE \\"A\\" : |
| 2 | Item No 01 : Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings s in roof coverings complete all as specified and directed. |
| 3 | Item No 02 : M&L Pre-painted galvalume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified |
| 4 | Item No 03 : M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified |
| 5 | Item No 04 : Dismantling wroght iron or mild steel work of any description not oterwise provide for complete all as specified and directed. |
| 6 | Item No 05 : S&F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 7 | Item No 06 : S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters, fixed with angle cleats or other connecting plates of Gde fe 410-0 or fe 250-0 complete all as specified and as directed. |
| 8 | Item No 07 : S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm, long and 5 to 10mm dia complete all as specified and directed. |
| 9 | Item No 08 : M&L for Prepration of newly painted steel surfaces of any description n exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer surface complete all as specified. |
| 10 | Item No 09 : Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed. |
| 11 | Item No 10 : S&F suspended prepainted false ceiling, self design, self texture, using E grid exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimensions 39mm x 24mmx 08mm thick (thickness comprising of GI /0.4+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length) cross tee of dimensions 29mm x 24mm 0.8mm thick and thick wall angle 22.2 mm x 22.2mmx 0.65mm thick (thickness comprising of GI /0.35+PPPCGS/0.3mm & weight of angle 0.70 Kg for 3050mm lenght) with and including 4mm thick HPSC (high pressure steam cured) pre-primed, self embossed, texture designer board, water resistant termitant, fire resistant for insulation and acoustic purpose to be placed in the grid systemduly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (wt - 0.007 Kg/clip) hold down clips (wt-0.0035 Kg/clip) with provn of light fixture complete all as specified and as directed. |
| 12 | Item No 11 : Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water all as specified. |
| 13 | Item No 12 : M&L for 10mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 14 | Item No 13 : M&L 15mm thick rendering on concrete/brick surfaces in CM 1:4 using with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified .( Note:- WPC measured and paid saperately) |
| 15 | Item No 14 : M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement |
| 16 | Item No 15 : M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed. |
| 17 | Item No 16 : M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint over a coat of primer complete all as as specified and as directed. |
| 18 | Item No 17 : M& L for complete removal of existing treatment and appying two coats of 100% premium acrlylic emulsion paint having VOC less than 50gm/liter and UV resistance as per IS 15489:;2004, Alkali & fungal resisstance , dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.9 liter/10 sqm over new surfaces comlete all as specified and as directed. |
| 19 | Item No 18 : M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound distempered over 1mm thick wall care putty on wall over priming surafce complete all as specified and directed |
| 20 | Item No 19 : M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified |
| 21 | Item No 20 : M&L for Prepration of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of (white or tinted) complete all as specified. |
| 22 | Item No 21 : M&L for Prepration of old painted surfaces of steel of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified |
| 23 | Item No 22 : Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilliate demolition complete all as specified and directed. |
| 24 | Item No 23 : M & L for RCC (1:2:4) nominal Mix using 20mm graded aggregate in chajjas,parapet facia etc complete all as specified and as directed. |
| 25 | Item No 24 : Use and waste of form work to Chajjas and similar items including edges etc complete all as specified and directed. |
| 26 | Item No 25 : S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.Note : The re inforcement shall be welded with existing re inforcemnet after dismantaling of RCC Chajjas/Parapets etc. |
| 27 | Item No 26 : Supply only Liquid water proofing compound |
| 28 | Item No 27 : Demolition of brick work as in walls/parapet wall,s removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces complete all as specified and directed |
| 29 | Item No 28 : M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete . |
| 30 | Item No 29 : M&L for Brick work with sub class ‘B’ brick, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed |
| 31 | Item No 30 : Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 32 | Item No 31 : M&L vitriefied ceremic tiles 10 mm thick, in LIGHT SHADE, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 33 | Item No 32 : M&L for Vitriefied ceramic tiles 10mm thick LIGHT SHADE(square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on incl plaster (backing coat) 1:4 CM 10mm thick complete all as specified and directed. |
| 34 | Item No 33 : M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. |
| 35 | Item No 34 : M&L Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15mm thick cement screed bed in cement mortar 1:6 complete all as specified and directed. |
| 36 | Item No 35 : M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.. |
| 37 | Item No 36 : M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 complete all as specified and directed. |
| 38 | Item No 37: Dismantling of Stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed. |
| 39 | Item No 38 : M&L for Granite (of any type ) 20 mm thick work (table rubbed and polished ) in steps ,jambs,pilllars,window cill,cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with shade of Granite laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 40 | Item No 39 : M&L for rounding to edges of granite stone slabs one edge such as in counter type WHB platform etc. to the entire satsfaction of Engineer-in-Charge, complete all as specified and as directed. |
| 41 | Item No 40 : Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) all as specified. |
| 42 | Item No 41 : M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations,filling and mass concrete and sub base finished even & fair complete all as specified and directed |
| 43 | Item No 42 : M &L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 44 | Item No 43 : M&L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete. |
| 45 | Item No 44 : M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers ,apex stones, bed plates, water troughs and the like including use of formwork (straight or curved) ,including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed (Note :-reinforcement where provided shall be measured and paid seprately) |
| 46 | Item No 45 : Taking down existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 50 m. |
| 47 | Item No 46 : M & L for brushing neat cement slurry with 3.0 Kg of cement per Sqm incl cleaning of surface with wire brush all as specified and as directed |
| 48 | Item No 47 : Concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. |
| 49 | Item No 48 : M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 50 | Item No 48(b) : One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. |
| 51 | Item No 48(c) : One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. |
| 52 | Item No 48(d): Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm in each coat. |
| 53 | Item No 49 : Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area not exc 1.5 Sqm each all as specified. |
| 54 | Item No 50 : Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed . |
| 55 | Item No 51: Taking down Shutters of any description n.exc 1 Sqm each |
| 56 | Item No 52 : Taking down Shutters of any description exc 1 Sqm but n exc 2.0 sqm each |
| 57 | Item No 53 : Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 sqm each, in same opening all as specified and as directed. |
| 58 | Item No 54 : S&F pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, as specified and directed. |
| 59 | Item No 55 : S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm complete all as specified and as directed |
| 60 | Item No 56 : S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat including locking arrangment for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including complete all as specified and directed, (including all locking arrangements and all fittings fixtures) Note:- sheet glass, wire cloth shall be measured and paid seperately. |
| 61 | Item No 57 : M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and directed. |
| 62 | Item No 58 : S & F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats. |
| 63 | Item No 59 : S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed. |
| 64 | Item No 60 : S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete. |
| 65 | Item No 61 : S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification complete all as specified and directed. |
| 66 | Item No 62 : S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing, complete all as specified and directed. |
| 67 | Item No 63 : S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed |
| 68 | Item No 64 : S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 69 | Item No 65 : S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed. |
| 70 | Item No 66 : S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed. |
| 71 | Item No 67 : S&F continuos (piano) hinges,mild steel bright finish or electrogalvanised,width of flaps 30 mm all as specified and directed. |
| 72 | Item No 68 : S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 73 | Item No 69 : S&F 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed. |
| 74 | Item No 70 : S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed. |
| 75 | Item No 71 : S&F 125mm hasp and staples,aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed |
| 76 | Item No 72 : S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified. |
| 77 | Item No 73 : S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified. |
| 78 | Item No 74 : M&L for 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair all as specified |
| 79 | Item No 75 : S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified |
| 80 | Item No 76 : S&F in repair 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified |
| 81 | Item No 77 : S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified |
| 82 | Item No 78 : S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified. |
| 83 | Item No 79 : S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified SCHEDULE OF CREDIT Name of Work: SPL REPAIR TO BLDG NO HR-89(BALRAM BLOCK) AT 1 TTR, 1STC UNDER GE WEST) JABALPUR Sl No Decriptipin of work Unit Qty Rate Amount |
| 84 | Item No 79 : S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified SCHEDULE OF CREDIT Name of Work: SPL REPAIR TO BLDG NO HR-89(BALRAM BLOCK) AT 1 TTR, 1STC UNDER GE WEST) JABALPUR Sl No Decriptipin of work Unit Qty Rate Amount |
| 85 | Old Brick bat |
| 86 | Old Wooden/PVC Chowkats with shutters not exc 1.5 Sqm including iron mongary. |
| 87 | Old Wooden/PVC Chowkats with shutters exc 1.5 Sqm including iron mongary. |
| 88 | Old Scrap Iron |
| 89 | Old GI sheet |
| 90 | Old false ceiling/panelling board with fillets |
| 91 | Old unsv GI Tubing 15mm bore |
| 92 | Old unsv GI Tubing 20mm bore |
| 93 | Old unsv GI Tubing 25mm bore |
| 94 | Old unsv flushing cistern |
| 95 | Old unsv bib tap/stop valve/pillar tap/ ball valve,Gate valve of any dia and type grating,pvc connection,shower,jet,faucet ,waste fitting,toilet paper holder etc |
| 96 | Old unsv sink /plate rack of any size and type |
| 97 | Old unsv Pvc (SWR) pipe of any dia |
| 98 | Old Beveled edge mirror |
| 99 | Old Pvc / AC water tank 500 Ltr capacity |
| 100 | Old Curtain Rod with brackets |
| 101 | Old /UNSV Point wiring |
| 102 | Old /UNSV switches, ,holders,sockets, ceiling rosses, fan regulators etc of any type |
| 103 | Old /UNSV Street light against 25, 45 Watt LED fittings and garden light or LED Bollard. |
| 104 | Old /UNSV Street light/Tubelight /decorative light/LED or any type upto 36 Watt. |
| 105 | Old /UNSV LED bulb of any capacity |
| 106 | Old /UNSV MCB DB/Main switch/change over /AC Box enclosure of any type and size. |
| 107 | Old /UNSV Sub Main of size 2.5 to 4.0 sqmm. |
| 108 | Old /UNSV Sub Main of size 6 to 10 sqmm. |
| 109 | Old /UNSV MCB SP/SPN/TPN/Isolaters / MCCB/RCBO of any type and size Total : 166655.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
