|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 2 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured epoxy grout filling to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | All as per item No. 2.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured grout filling to match including 15mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 5 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7mm/ 300 x 600 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured grout filling to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 6 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 7 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | All as per iten No. 7.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for 16 to 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 10 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 11 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 12 | M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified and directed. |
| 13 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M&L for preparation of new surfaces of plastered of walls and applying two coat of distemper oil emulsion including priming the surfaces and including one coat of wall putty complete all as specified and directed. |
| 15 | M&L for preparing of new surface of wall and applying two coats of cement of paint complete all as specified and directed. (Note:- Rate shall be including for necessary scaffolding and safety measuares where required at site) |
| 16 | M&L for preparation of newly plastered surfaces and applying two coat of white wash on ceiling complete all as specified and directed. |
| 17 | M&L for preparation of old painted surface and applying two coat of synthetic enamel paint on old wooden surfaces of any description, not otherwise, described over 10 cm width or grith including complete all as specified and directed. |
| 18 | M&L for preparation of old painted and applying two coat of synthetic enamel paint on steel & Iron surfaces of any description not otherwise, described over 10 cm width or grith including complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment and preparation of surfaces and applying two coats with distemper oil emulsion with 2mm putty including primer on old treated surfaces of wall etc., complete all as specified and directed. Contractor shall furnish gaurantee of four year against service rendered. |
| 20 | M&L for preparation of old surface of wall, washing, scrubbing down and stopping old treatment and painted surfaces of plastered/ decorated surface and applying two coat of Premium Acrylic smoot exterior paint with 2mm thick putty including primer complete all as specified and directed. (Note:- Paint will be done by brush/ spray/ roller of building upto any height complete all as specified and directed. (Note:- Rate shall be including for necessary scaffolding and safety measuares where required at site complete all as specified and directed. |
| 21 | S&F in repair SS curtain rod/ rail 25mm dia medium weight premium quality SS Brackets with Decorative caps as approved complete all as specified and directed. |
| 22 | S&F in repairs 110mm dia cast iron floor/ nahani trap, with CP grating including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as specified and directed. |
| 23 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 24 | S&F Grating 100mm dia of CP with or without hole complete all as specified and directed. |
| 25 | S&F in repair 15mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 26 | S&F in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed. |
| 27 | S&F in repair 15mm bore chromium plated swan neck pillar tap, fancy type, cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 28 | S & Fixed in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinge device complete all as specified and directed. |
| 29 | S&F in repairs CP Paper Holder Stainless Steel fixed to wall complete all as specified and directed. |
| 30 | S & Fixed in repair jet spray for pedestal pattern water closet complete all as specified and directed. |
| 31 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern) white including plastic water closet seat cover, white closed pattern with flat bottom, and connection to drain or outgoing pipe and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed. |
| 32 | S&F in repairs vitreous china squatting pan `Orissa` pattern, size 580 x 440mm white in repairs with integral foot rests (Excluding flushing cistern and flush pipe) with S or P trap, fixed in repair complete all as specified and directed. |
| 33 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. |
| 34 | S&F in repairs vitreous china, white, wash hand basin, flat back size size 550 x 400mm including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. |
| 35 | S&F in repair Bevelled edge looking mirror of size 600 x 450 selected quality glass mounted 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated screws and cup washer complete all as specified and directed. |
| 36 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 37 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 38 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed. |
| 39 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 40 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 41 | S&F of 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 42 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed. |
| 43 | S&F of 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 44 | S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 45 | S&F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 46 | S&F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and directed. |
| 47 | S&F in repairs flexible waste pipe for wash hand basin, fitted wash hand basin including all necessary brackets etc. complete all as specified and directed. |
| 48 | S&F in repairs 32/40mm PVC down pipe for kitchen sink, fitted kitchen sink including all necessary brackets etc. complete all as specified and directed. |
| 49 | S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 50 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 51 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification. |
| 52 | S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed. |
| 53 | M&L in fixing in repairs 18/19mm thick pre-laminated particle board, interior grade, pre-laminated one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 54 | S&F in repairs of partial overlay/ fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/ silver complete all as specified and directed. |
| 55 | S&F in repair of 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 56 | S&F in repair of 100mm size MS mat/ glossy finish handle complete all as specified and directed. |
| 57 | Dismantling Plain or Corrugated steel/ AC sheeting any gauge, thickness, including Nainital or similar pattern Roof covering complete all as specified and directed. |
| 58 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 59 | S&F for plain galvatume mild steel sheeting thickness 063mm in ridges, hips, valley gutters, drip and straight flashings (length and grith as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 60 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and directed. |
| 61 | S&F steel work in tubular trusses, purlins etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade ST-240 etc. complete all as specified and directed. |
| 62 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 63 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and directed. |
| 64 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, (E -Board) exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification, of size 600mm x 60mm x 6mm complete all as specified and directed. |
| 65 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each and n. exc. 4 Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 66 | Taking down Shutters of any description exc. 1 sqm but n.exc 2 sqm each of any description complete all as specified and directed. |
| 67 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 68 | Taking down Shutters of any description n. exc. 1 sqm each of any description complete all as specified and directed. |
| 69 | S&F pressed steel door frame for single door, size 105 x 60 x 1mm with one rebates including necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm of length 30 cm) etc. including cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled protion in cement mortors 1:3 or cement mortors 1:2:4 Type B-1, depth of embedded portion holdfasts exc. Half brick but not exc. One brick from the face of the jamb incl the wall complete all as specified and directed. |
| 70 | M&L for PCC 1:2:4 type B-0 (12.5mm graded) aggregate for filling in pressed steel door framed complete all as specified and directed. |
| 71 | S&F second class hardwood Plain, solid, straight chowkhat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 72 | S & F 30mm thick 2nd class hard wood rail and style, plain, framed, panelled shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces. The size of rail and stile as per IS : 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 73 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with M.S. Square tube S&F in opening as per specification & drawing complete all as specified and directed. |
| 74 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 75 | S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 76 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. |
| 77 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. |
| 78 | S&F powder coating anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 79 | S & F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter - 01 No.(vii) Two Nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 80 | S&F powder coating anodised aluminium ventilator, fixed type without sash bar, aluminium section weighing 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. including 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion complete all as specified and directed. |
| 81 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching of drilling out glazed pins/ spring clips and providing and fixing new ones complete all as specified and directed. |
| 82 | M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty fitted in wooden/ steel window in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 83 | M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 84 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 85 | S&F 125mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 86 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. |
| 87 | S&F100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 88 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 89 | M&L for preparation of new wooden surface over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer complete all as specified and directed. |
| 90 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, pillars etc. separation of servieable materials from the unservieable stacking the servieable materials within 100 M and disposal unservieable materials, debris and rubbish to a distance not exceeding 100 M complete all as specified and directed. |
| 91 | M&L for Brickwork with fly ash bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:4 using fly ash brick complete all as specified and directed. |
| 92 | S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank in SSR Part-I, complete all as specified and directed. |
| 93 | S&F in repair 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank in SSR Part-I, complete all as specified and directed. |
| 94 | S&F in repair PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints, sealed with adhesive suitable for PVC pipe and fixed to wall with iron clamps etc. complete all as specified and directed. |
| 95 | S&F in repair PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints, sealed with adhesive suitable for PVC pipe and fixed to wall with iron clamps etc. complete all as specified and directed. |
| 96 | S&F 75mm bore PVC (SWR) Bends with access door (any radius), complete all as specified and directed. |
| 97 | S&F 110mm bore PVC (SWR) Bends with access door (any radius), complete all as specified and directed. |
| 98 | S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specified and directed. |
| 99 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal provided with access door complete all as specified and directed. |
| 100 | S&F 75mm PVC (SWR) Branch pieces, single, (single Y) equal or unequal complete all as specified and directed. |
| 101 | S&F 110mm PVC (SWR) Branch pieces, single, (single Y) equal or unequal complete all as specified and directed. |
| 102 | S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 103 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 104 | S&F in repair PVC ball valves high pressure with epoxy coated Aluminium rod & high density polyethylene ball screwed for 15mm bore pipe complete all as specified and directed. |
| 105 | All as per Srl item No. 104.00 here in before, but suitable 20mm bore pipe complete all as specified and directed. |
| 106 | S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 107 | S&F in repair PVC water tank covers premium quality fitted to tank. Water tank of capacity 500 ltrs to 1000 litres complete all as specified and directed. |
| 108 | S&F in repair heavy duty wall mixer legs, brass elbow, brass socket, short pices for pillar cock, CP stop cock, CP bib cock concealed stop cock wall mixer in any size etc. complete all as specified and directed. |
| 109 | S&F in repair brass spindles, heavy duty for pillar cock, CP stop cock, CP bib cock concealed stop cock, wall mixer, sink mixer in any size etc. complete all as specified and directed. |
| 110 | M&L in repair 12mm thick plywood, commercial quality BWR grade type BB, 5 ply, fixed with screws to timber frame work complete all as specified and directed. |
| 111 | S&F in repair mild steel helical door spring 300mm long stove enamelled black including roller and roller plates complete fixed with screws to wooden frame or with welding to steel frames complete all as specified and directed |
| 112 | M&L for welding in repair not exc. 2.5 cm each with thickness of metal to be welded not exc. 6mm, complete all as specified and directed. |
| 113 | S&F in repair PVC cabinet mirror of size 450 x 300 x 100mm with selected quality glass complete all as specified and directed. |
| 114 | S&F in repair 15mm Gun-metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 115 | S&F in repair 20mm Gun-metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 116 | S&F in repair 150mm dia CP Towel ring complete all as specified and directed. |
| 117 | S&F in repair MS chromium plated bracket holders for curtain rod 25mm dia and fixed with screws to pelmet boxes complete all as specified and directed. |
| 118 | S&F in repairs Corner glass shelf of size 320 x 320mm with Silver chromium finished border Oval Range premium quality complete all as specified and directed. |
| 119 | Disconnecting existing tanks exc 500 ltrs but n exc. 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and re-fixing in position cleaning and removing all scale and dirt and disinfecting the tank and refixed in same position. |
| 120 | M&L for Cement concreat type D-2 (1:4:8) using 40mm graded stone aggregate in foundation filling and mass concreat complete all as specified and directed. |
| 121 | Providing and laying 60mm thick foctory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in foothparth, parks, lawns drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour pattern over including 40mm thick bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting paver blocks as per required size and pattern, finishing and sweeping extra sand. |
| 122 | M&L for Chequered cement concrete tiles 300 x 300 x 22 to 25mm thickas in floor/ Path set jointed and pointed in neat cement slurry with grey cement and pigment laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. Please Enable Macros to View BoQ information |
