|
| 1 | Rewinding of 40 HP VT motor & booster motor (centrifugal motor) Kirloskar make/equivalent make as per orignal winding 415 volt with super enamelled copper wire as per required guage complete all respect direction of E/I. It is also include the dismentling /refixing/cartage from site to workshp/ factory and vice versa. The old material will the property of contractor (Old material rate already deduct in) 40 HP, 1440 RPM (NSI-3.8.01) |
| 2 | S/F Thrust bearing 7220 (Make SKF, Kayo, NTN or similar) (AOR) |
| 3 | S/F Ball bearing 6311 (Make :- SKF/Kayo, NTN or simillar) (AOR) |
| 4 | Supply & Fixing Flat Cable 25 Sqmm. 3 Core Finolex make. (AOR) |
| 5 | Repairing of 30-50 HP ATS starter including changing of No volt coil, over load coil, movving contact, D contact & Finger contact etc. complete operation. (NSI-8.13) |
| 6 | Repairing of ATS starter transformer coil as original winding with super enameled copper wire confirming to IS : 13730 (IEC-60317) Part 3 and 34 i/c Dr. brand make varnish, insulation paper etc. Fenolex make complete in all respect as per direction of E/I. (NSI-8.14) |
| 7 | S/F of 11 KV TPMO Relco/Rama make 9 nos. insulator of Jai shree/BHEL/Rama/Rastriya make complete in all respects as per direction of E/I. (UPERC, Page No.-48, S. No.-13) |
| 8 | Supply & erection of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respects. (PS No.-627) Rate : Rs. 263.00 + 18% GST = Rs. 310.34. |
| 9 | Rewinding of 63 KVA transformer i/c changing of brunt coil, HT and LT coils bushing, gas kit, S/f required accessories complete with testing, dismantling and installation complete in all respect as per direction of E/I. (AOR) |
| 10 | Rewinding & Repairing of Transformer Kirlosker make/Equivalent make as per original winding 11/433 K/Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in charge. It is also include the dismantling / Refixing /Cartage fromt site to workshop /factory and vice versa. The old material will the property of contractor. (Lod material rate already deducted in AOR) 250 KVA (NSI-8.17.01) |
| 11 | Loading, unloading, cartage from site to workshop by crane and vice versa complete in all respect as per direction of E/I. (AOR) |
| 12 | Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT-AA. (PS-1413) Rate : Rs. 1020.00 + 18% GST = Rs. 1203.60. |
| 13 | S/F of 400 Amp. four pole change over switch on 50x50x6mm angle iron frame i/c the cost of labour, T&P, painting and other material requried for proper completion of the work as per direction and satisfaction of E/I. (PS No.-381) Rate : Rs. 23420.00 + 18% GST = Rs. 27635.60. |
| 14 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer in charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS-501) |
| 15 | 400 sqmm 3½ core Rate : Rs. 2048.00 + 18% GST = Rs. 2416.64. |
| 16 | 70 sqmm 3½ core Rate : Rs. 613.00 + 18% GST = Rs. 723.34. |
| 17 | 25 sqmm 3½ core Rate : Rs. 373.00 + 18% GST = Rs. 440.14. |
| 18 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respect as per direction of E/I. (PS. No.-504) |
| 19 | 400 Sqmm Rate : Rs. 596.00 + 18% GST = Rs. 703.28. |
| 20 | 70 Sqmm Rate : Rs. 67.00 + 18% GST = Rs. 79.06. |
| 21 | 25 Sqmm Rate : Rs. 27.00 + 18% GST = Rs. 31.86. |
| 22 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : : 120 sq. mm (DSR-18, I.No.-10.5.2/P-37) |
| 23 | supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 sq. mm (DSR-18, I.No.-10.4.2/P-37) |
| 24 | Supply and laying of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality. (PS No.-1136) Rate : Rs. 2550.00 + 18% GST = Rs. 3009.00. |
| 25 | Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all restpect. CAT-AAA (PS-1406) Rate : Rs. 4880.00 + 18% GST = Rs. 5758.40. |
| 26 | S/f 250 Amp MCCB Make L & T.make/ (AOR) |
| 27 | S/f MNX 110 Amp Contractor Make L & T (AOR) |
| 28 | S/F of Ampere meter . (Make :- AE / Procom / conzerve) (NSI-8.10.01) |
| 29 | S/F of Volt meter . (Make :- AE / Procom / conzerve) (NSI-8.10.02) |
| 30 | S/f 125 Amp MCCB TPN Make L & T (AOR) |
| 31 | S/F Timer Make L & T AOR |
| 32 | S/F VPD Make Soft Hard AOR |
| 33 | S/F MPD Make Soft Hard AOR |
| 34 | S/F WLC Seal Monitor Make Pump Care / Kishor AOR |
| 35 | Control Transformer Make Electra Care / Pioneer. AOR |
| 36 | Winding Temp Relay Make Minilec AOR |
| 37 | Rewinding & Repairing of Transformer Kirlosker make/Equivalent make as per original winging 11/433 K. Volt with super enameled copper wire as required gauge complete all respect as per direction of Engineer in charge. It is also include the dismantling/Refixing/Cartage from site to workshop/factory and vice versa. The old material will the property of contractor (Old material rate already deducted in AOR) |
| 38 | 400 KVA (NSI-8.17.02) Please Enable Macros to View BoQ information |
