|
| 1 | Site clearance and disposal of over burden soil.... |
| 2 | Extra for cleaning the old surface by scrapping the entire old white wash of coolour wash including cost of scaffoding all complete as pe direction of E/I.[5.8.9] BCD |
| 3 | Providing one coat of plastic emulsu paint of approved shade ad make over old surface including washing ,cleaning and preparing the walls,scafoldig ,washig of floor [5.8.19] |
| 4 | Ceiling FAN 48''(1200mm)[M.772] |
| 5 | 9/10 W LED BULB [8-855] |
| 6 | Supplying, fitting and fixing fully glazed steel windows of standard rolled 'Z' [5.5.18] |
| 7 | (ii) Putty |
| 8 | (iii) FITER Gr.II |
| 9 | Providing & fixing CPVC pipes having thermal stabilty for hot & cold water supply…..do….do….as per E/I [18.7.2] |
| 10 | Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore [1687] |
| 11 | CI bracket pair for WHB 550x400 mm size[27-a] |
| 12 | Providing & fixing male ended 15mm dia brass bib cock .do…..do…as per E/I [18.49] |
| 13 | Providing & fixing CP brass Pillar cock ….do…..do…as per E/I [3.1.11-b |
| 14 | Providing abd applying white cement putty of average thickness 1mm pf approved brand and manufacturer over plastered wall surface ..do…do E/I [DSR 2023 13.80 |
| 15 | Finishing walls with Acrylic Smooth exterior paint of required shade (i) New work (Two or more coats applied @ 1.67ltr/10sqm over and including one coat of exterior primer applied 0.90 ltr/10sqm)[DSR 2023 13.46.1] |
| 16 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroghly,scaffolding and taxes all complete as per building specification and direction E/I.[5.8.45] |
| 17 | Supplying fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handles, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.[5.4.32] |
| 18 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building, for all heights and all levels etc. including (a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design (b) Providing, fabricating and supplying and fixing panels of aluminiumcomposite panel cladding in pan shape in metalic colour of approved shadesmade out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumifion based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on (c) The fastening brackets of Aluminiurn alloy 6005 T5/MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per 1. Partion Wall |
| 19 | ITC Celling Fan : Installation, testing and commissioning of ceiling fan, Including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq. mm. FRPVC Insulated, copper conductor,single core cable etc, as required. |
| 20 | S/F Modular type electronic fan regulator: Supplying and fixing stepped (two module) type fan regulator on the modular plate etc as required. |
| 21 | S/F light plug point with modular type accessories supply and fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 Amp modular socket outlet and 5/6 type switch connection [JSR 1.31] |
| 22 | S/F light plug point with modular type accessories supply and fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 Amp modular socket outlet and 15/16 type switch connection [JSR 1.32] |
| 23 | S/F SP MCB DB: Supplying and fixing following way, single pole and neutral sheet MCB distribution board, 240 volts on surface/ recess complete with tunned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, Interconnections, phosphatised and powder painted Including earthing etc. as required (But without MCB/RCCB/ISOLATOR). (J.S.R.) 2.8 12 way (Double Door)2.8.9 |
| 24 | S/F 'C' series SP MCB: Supplying and fixing 240 volts, 'C' series, miniature drcuit breaker suitable for Inductive loads of following poles In the existing MCB DB complete with connections, testing and cornemissioning etc, as required.[(J.S.R.) 2.12] 6/32A Single Pole [2.12.1] |
| 25 | 40A DP MCB (To use as Incommer for all SP MCB DB-12 way) [2.12.6] |
| 26 | supplying polythene water storage tank of ISI mark …. [ DWSD M079] |
| 27 | SUPPLYING fitting ang fixing vitreous white glazed earthen ware IWC of parry hindustanor any other ISS approved make with100 mm HCI P TRAP 15 litres ….. [DWSD 2022 3.2.1] |
| 28 | SUPPLYING fitting ang fixing vitreous white glazed earthen ware WASH hand basin … do ..do …E/I [DWSD 2022 3.2.5] |
| 29 | providing and fixing PTMT bib cock of approved quality and colour……... DSR 18.54.1 15 MM No |
| 30 | Earth work in excavation in foundation trenches In ordinary soil (vide classification of soll item A) do do specification and direction of ЕЛ.5.1.1-5.1.2 |
| 31 | Disposal of excavated earth in borrow area of 2 lead 1km(k) +2km(p) (Add 50% extra for loose volume) |
| 32 | Providing course clean sand in filling in foundation tranches or in plinth including ramming and watering in layer not exceeding 4 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building a specification and direction of E/1.15.1.10) |
| 33 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,do........................ do.................. complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. (DSR-16.91.2) Net Quantity of paver block |
| 34 | Providing and laying in position cement concrete 0f specified grade excluding the cost of centering and shuttering -All work upto plinth level:(1:1.5:3) E/I [5.3.1.1](For Locking) |
| 35 | Add 18% GST |
| 36 | Adding Labour Cess @ 1% |
| 37 | For Sign board and Photography Please Enable Macros to View BoQ information |
