|
| 1 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for maximum 40days. |
| 2 | Hire charges for Providing Weld mesh partition arrangements.Using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for maximum 40days. |
| 3 | Hire Charges for erecting of GI Sheet Roof Shed of size 3x3M using 20Gauge GI Sheet with casurina post for vertical and horizontal the runner with purlins all the three sides of the shed should be tied with casurina post and GI sheet to a height of 1.20M and the entire assembly should be dismantling and taken back by the supplier after counting is over on hire basis.and as directed by the departmental officers.( for maximum 40days.) |
| 4 | Dismantling clearing away and carefully stacking the materials useful for reuse of brick masonry walls etc., complete complying with standard specification and as directed by the departmental officers.and restoring the surface into the original condition. |
| 5 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge..In Cement Mortar 1:6 |
| 6 | Ground floor |
| 7 | First floor |
| 8 | Second floor |
| 9 | Plastering with cement mortar 1:5 (One cement and five P-sand) 12mm thick mixed with bonding agent Cebex112, Zydex-Zycrete 2x or other equivalent compound conforming to BIS at 200 ml of one cement bag (50kg) for increased workability and air entrainment used finished in all floors including curing etc. complying with standard specification and as directed by the Departmental Officers. |
| 10 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Labour charges for shifting of furnitures like Tables, chairs and bench and Repairing, Cleaning etc. Including cost and conveyence and redoing the same after counting. (Mazdoor Grade II) |
| 12 | Hire charges for fixing of steel racks with 3 Panels to height of 2.15M and a width of 1.80m made out of 32x32mm 16 gauge MS square pipe and 32x32x3mm MS angle etc complete ( Racks supplied by Department )for maximum 40days. |
| 13 | Hire charges for Providing Partition in between counting hall and materials room using MS Pipes M.S angles for vertical covered with corrugated powder coated sheet. This rate is inclusive of materials, Labour and dismantling charges after the counting is over, for maximum 40days. |
| 14 | Hire charges for Providing watch Tower of size 3mx3m, 20ft height. Including cost of fixing, labours, loading & unloading charges etc., for maximum 40days. |
| 15 | Hire charges for Providing GI Sheet Pandal including all labour charges and conveyance charges and removing the same after counting is over etc, for maximum 40days. |
| 16 | Hire Charges for errecting Barricading with vertical of 8mm to 10cm dia in length 1.80M of which 1.20M will be above ground level and 0.60M will be below ground level spacing at 2M intervals with horizontal runners 5cm to 8cm dia the runners being fixed in three Rows to the verticals the horizontal being screwly fixed to the verticals Coir rope of adequate length to render to entire structure stable including digging holes 15cm dia and 0.60m deep on all surfaces (Block to concrete ground water bound mecadam boulders etc) as directed including errecting the verticals and fixing in the holes screwly & rigidity fixing the runners keeping each of the material against the fit and pit ternage removing the barricading and taken back all the materials as directed by the depamental officers including refilling all the holes and restoring the surface to the original condition and as directed by the Departmental officers.for maximum 40days. |
| 17 | Hire charges for Plastic chairs for maximum 40days. including labour,transportation charges,loading & unloading charges etc complete |
| 18 | Hire charges for Plastic chairs For 3 days including labour,transportation charges, loading & unloading charges etc complete |
| 19 | Hire charges for Table for maximum 40days. including labour,transportation charges, loading & unloading charges etc complete |
| 20 | Hire charges for Supply, Installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS junction box / false ceiling using fixing accessories llike screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers and removing the same after counting is over (Make: Apollo / Equivalent)for maximum 40days. |
| 21 | Hire charges for Supply, installation, testing,commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers and removing the same after counting is over (Make: Ravel / Equivalent)for maximum 40days. |
| 22 | Hire charges for Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers and removing the same after counting is over (Make: Ravel / Equivalent)for maximum 40days. |
| 23 | Hire charges for Providing of 3 seated & 2 seated wooden sofa with cushion with spring covered with approved designing cloth. The rate inclusive of cost of material,Labour charges for manufacturing conveyance charges, loading, unloading charges etc. for maximum 40days. |
| 24 | .Hire charges for 6mx6m Tarpaulins supply to the strong room The rate inclusive of cost of material,Labour charges for manufacturing conveyance charges, loading, unloading charges etc for maximum 40days. |
| 25 | Hire charges for Providing ABC powder type Fire Extinguisher 6kg . Including cost of fixing, labours, loading unloding charges etc.,and removing the same after counting is over , for maximum 40days. |
| 26 | Hire charges for Providing Carbon-di-Oxide Gas type Fire Extinguisher 4.50kg . Including cost of fixing, labours, loading unloding charges etc., and removing the same after counting is over, for maximum 40days. |
| 27 | Supplying, fabricating, erecting and fixing Hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level.Using Hilux board plain sheets (10mm thick) |
| 28 | Hire charges for Supplying and fixing and removing of Mild Steel Ladder Using Rectangular section of size 80x40x6mm for Flight connecting the landing with steps of 30cm thread and 15cm riser for the width of 1.00m.The thread should be of rectangular section size 40x20x6mm with a spacing of 10cm c/c. The landing is of outer frame with rectangular section 80x40x6mm and inner section of size 30x30x6mm .The entire ladder is supported with a vertical member of rectangular section 40x40x6mm with cross bracing of similar section. The handrails are made of steel balustrades using rectangular section of size 40x40x6mm spaced at 150mm centre to centre so that the two balustrades in each step shall be placed centrally and the top of balustrades connected with the hand rails of rectangular section of size 40x40x6mm & the bottom of balustrades shall be fixed on to the top of step by means of welding. The rate includes excavation for proper fixing of Post with cement concrete 1:2:4 and dismantling the existing brick masonry wall / reinforced cement concrete roof / slab for fixing in position and making good the dismantled portion to the original condition. All the section should be finished with two coats of good quality synthetic enamel paint over one coat of red oxide primer. The rate includes cost of materials,labour charges for cutting & welding, painting, transportation & conveyance charges & if any incidental charges etc. |
| 29 | Manufacturing, supplying and fixing of cupboard shutter using country wooden (kongu) frame of 100 m x 32 mm thick for outer frame horizontal and vertical members. The shutter frame of size 75 x 32 mm of country wooden scantling (Horizontal 3 nos., Vertical 2 nos., of each shutter) with 12 mm thick both side prelaminated particle board (exterior grade) shutter. The shutter are fixed to the frame with requied 6 nos., of SS hinges of 100 x 30 mm 2 nos., ‘D’ type alumium hadle 100 mm 2 nos., of aluminum tower bolts 75 x 10 mm 2 nos., of cupboard lock etc., the country wooden frame shall be painted two coats with synthetic enamel paint over one coat of wooden primer. The prelaminated particle board and furniture fittings used should be got approved by the Executive Engineer before use on works. The cost is inclusive of aluminum handle, tower bolts, SS hinges, screws, nails, and required further fittings and painting the frame and inner side of prelaminate shutter etc., complete complying with standard specification and as directed by the departmental officers. |
| 30 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cementmortar and black powder etc, complete complying with standard specification and as directed by the departmental officers 38 / 40mm thick |
| 31 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 32 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 33 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap / Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 34 | Hire Charges for providing Arabian Tent including Labour Charges and conveyance charges and removing the same after counting is over for maximum for 40 days |
| 35 | Hire Charges for Samiyana for 3 days including Labour Charges and conveyance charges and removing the same after counting is over etc |
| 36 | Hire Charges for JCB for clearing the bushes around the building etc complete |
| 37 | GST @ 18 % Please Enable Macros to View BoQ information |
