|
| 1 | Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m depth and getting out in any type of strata for locating fault, laying of cable and pipe or taking out old u/s cable complete including taking out & stacking of old bricks/pipes, etc and making good to the disturbed surface all asspecified and directed. |
| 2 | All as per Item No 1.00 here in before but exceeding 1.5 mtr in depth & not exdeeding 3 mtr. |
| 3 | Returning, filling in including spreading, levelling,watering and well ramming excavated any type soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts have been erected and tested complete all as specified. |
| 4 | Removal of excavated surplus soil any type to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. |
| 5 | Material and labour for Boring/drilling holes underneath road / PCC manually including insertion GI pipe of 100mm dia of pressure 0.4 Mpa complete all as specified and as directed by the Engineer-In-Charge. |
| 6 | Material and labour for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate for coping around poles,including provision of necessary form work, finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 7 | Material and labour Plain Cement Concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation of poles,stays including provision of necessary for fixing of poles,stays,struts, filling of road cuttings etc. complete all as specified and directed by Engr - in Charge. |
| 8 | Material and labour for Cable route indicator showing \\" MES HT 11 KV UG Cable\\" and route of cable with arrow made of CI in suitable eliptical shape and fixed on angle iron 40x40x6mm, 800mm long painted in Brown Colour with two coats of synthetic enamel paint cover a coat of red oxide primer duly embaded in PCC block 0.40x0.40x0.40 in ground complete all as directed and specified. |
| 9 | Material and labour for clean dry sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and levelling complete all as speccified. |
| 10 | Material and labour for laying in trenches reinforced precast cement concrete cable cover, class HV type 2 with peak, size 300mmx180mmx40mm for cable protection complete all as specified. |
| 11 | M & L for GI Pipe light grade 100mm bore for cable protection in floor/road crossing/along pole complete all as specified and as directed. |
| 12 | Supply and erecting in true vertical position steel tubular swaged pole 11mtr long type 410 SP-31) complete with base plate and bracket fixed at top , painted internally throuout and externally up to the embeeded depth with two coats of black bitumnous paint and remaining external portion with two coats of aluminium paint over a coat of red oxide primer including providing 30cm wide alternate strips with sky blue and white synthetic enamal paint upto 1.2m high from ground level complete all as specified and as directed. Make: Vikram Industries/ Surjit Electric wood/ Mahindra Industries.(Note : Earth work and PCC foundation is to measured and paid separately under respective item.) |
| 13 | Supply, laying, jointing, testing and commissioning of High Tension (HT), 11000Volts (earthed) grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminum conductor, cross sectional area 95Sqmm, 3core under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc., complete all as specified and directed.Note : Excavation and earth work, sand cushioning and precast concrete cable cover for protection of cable shall be measured and paid separately. |
| 14 | Supply, laying, jointing, testing and commissioning of High Tension (HT), 11000Volts (earthed) grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminum conductor, cross sectional area 120Sqmm, 3core under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc., complete all as specified and directed. Note : Excavation and earth work, sand cushioning and precast concrete cable cover for protection of cable shall be measured and paid separately. |
| 15 | Supply, laying, jointing, testing and commissioning of High Tension (HT), 11000Volts (earthed) grade, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty) with stranded aluminum conductor, cross sectional area 185Sqmm, 3core under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc., complete all as specified and directed.Note : Excavation and earth work, sand cushioning and precast concrete cable cover for protection of cable shall be measured and paid separately. |
| 16 | Dismantling and taking out old unserviceable/broken cross arms including bracing support clamps and back plate and Supply and fix cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot ,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed by Engr in Charge. |
| 17 | Supply, jointing & testing, indoor end termination joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 50 to 95Sqmm size cable, complete all as specified and directed. |
| 18 | Supply, jointing & testing, indoor end termination joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 120 to 240Sqmm size cable, complete all as specified and directed. |
| 19 | Supply, jointing & testing, indoor end termination joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 240Sqmm size cable, complete all as specified and directed. |
| 20 | Supply, jointing & testing, outdoor end termination joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 50 to 95 Sqmm size cable, complete all as specified and directed. |
| 21 | Supply, jointing & testing, outdoor end termination joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 120 to 240 Sqmm size cable, complete all as specified and directed. |
| 22 | Supply, jointing & testing, straight through joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 50 to 95 Sqmm size cable, complete all as specified and directed. |
| 23 | Supply, jointing & testing, straight through joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 120 to 185 Sqmm size cable, complete all as specified and directed. |
| 24 | Supply, jointing & testing, straight through joint kit (Cold shrinkable) complete with jointing material and accessories suitable for 3wire, 11KV (Earthed) grade, HT, underground XLPE insulated armoured aluminium conductor, 3core, 240 Sqmm size cable, complete all as specified and directed. |
| 25 | Supply and replacement of unserviceable HT enclosed bus bar with new outdoor HT bus bar 11 KV made out of MS/ CRCA sheet of size 3.00 mm thick , 3 Nos copper bus bar of size 50 mm x 10 mm x 0.45 Mtr fixed on HT 6 Nos insulators 11 KV of size 1 M X 1.2 M x 0.60 MM with legs made out of MS angle 50X50X10 mm & 0.75 Mtr in height (45 Cm above Gl and 30 Cm below GL) including necessary excavation and fixing arrangements,suitable PCC foundation and including dismantling old unserviceable HT Enclosed bus bar as specified and directed by Engr in Charge. |
| 26 | Supply and fix in replacement breather assembly for transformer 250 KVA to 400 KVA including dismantling old unserviceable breather complete all as directed and specified by Engr in charge. |
| 27 | Supply and fix in replacement breather assembly for transformer 100 KVA to 200 KVA including dismantling old unserviceable breather complete all as directed and specified by Engr in charge. Please Enable Macros to View BoQ information |
| 28 | Supply and fix in replacement breather assembly for transformer 100 KVA to 200 KVA including dismantling old unserviceable breather complete all as directed and specified by Engr in charge. Please Enable Macros to View BoQ information |
