|
| 1 | Supplying of 1.1KV, XLPE insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 4C x 16 Sq.mm |
| 2 | Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. 4C x 16 sq.mm |
| 3 | Supplying and making end termination with glands, lugs of LT cable. 4C x 16 Sq.mm |
| 4 | Supply and Installation of Pole box with MCB provision and suitable connectors for 3 Ph/1 Ph connections and loop in and loop out terminals for 10 sqmm/25sqmm 3.5 core Al cable and branch out 2.5sqmm 2 core Al PVC insulated cable, enclosed in a Thermoplastic, poly styrene enclosure, which should be shock proof, IP65, rust proof, dust proof, water proof having internally embedded gasket with provision for cable entry through glands.260mmx210mmx116mm |
| 5 | Supply & Fixing of LED Flood light luminaire with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output rated life Burning Hrs 5000hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degree to 70degree.CCT>5500k, IP66 optical and electrical compartment &impact resistance of complete luminaire>1K08. Power factor>0.9 with mains, Surge Protection -Min 5KV along with Over voltage /Overload/Short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79& LM 80 Adherence with RoHS.UL approved MCPCB.Top access street light with single screw to ensure ease of maintenance at the sight site location minimized minimal tools. LED Light fixture with 150W System power consumption. LED Efficiency>130 lm/w, nominal CRI>75. Luminaire manufacture should have accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified ISO 9001:2008. Housing with Supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 years against any manufacturing defect. LED Flood Light 150W |
| 6 | Supplying and laying of 1.1KV, XLPE Armoured LT UG Copper Cable. 2C x 2.5 sqmm |
| 7 | Supply and fixing of 3ft square type Aluminium body with warm white 12 W light fittings, water proof, UV Protected’ Polycarbonate Diffuser as a complete job.Size: 900mm (3ft) height, 126mm length, 126mm width. |
| 8 | Construction of foundation works 300mmx300mm depth of 300mm and the coping cc shall be 0.1 mtr above the ground level which all the materials and Labour etc., Complete. |
| 9 | Supply and Installation of 3 Mtr Downward Resin Pole (Rust free) with 200mm Polycarbonate base plate and single side light fitting |
| 10 | Supply and Installation of 3 Mtr Downward Resin Pole (Rust free) with 200mm Polycarbonate base plate and two sides light fittings. |
| 11 | Supply and fixing of 20W B22 LED Lamp with Complete wiring. |
| 12 | Fabrication, supplying and erecting of MS base plate of size 250 x 250 x 10 mm welded at bottom of the pole and 40mm dia. PVC pipe fitted in the concrete for entry of the cable, including foundation works 300mmx300mm depth of 500mm and the coping cc shall be 0.1 mtr above the grounded level etc. Complete. |
| 13 | Supplying and fixing of street light timer box of size 300x600x170mm made of thermoplastic modular panel with lid, shock proof, IP 65 having internally embedded gasket on both lid and flap with hylum sheet, din rail with 10 sqmm copper wire as complete and consisting of following components, a) 63 A TPN MCB - 1 Nob) MNX 40A 4 pole Contactor - 1 No c) 20A TPN MCB - 2 Nos. d) 24 Hrs Time switch - 1 No. e) 40A Connectors -10 Nos. |
| 14 | Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job.40mm OD/32mm ID. |
| 15 | Digging of trench of 0.3 meter deep x 0.3 meter wide, refilling the trench to the required ground level and consolidating etc., wherever favor block & concrete area the same have to be refinished as it was by tighten the loose soil and supplying required materials, complete. Hard Soil |
| 16 | Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200mtrs. |
| 17 | Excavation and removing of precast foundation with 9 Mtrs height Galvanized Octagonal poles, including releasing of Single arm brackets and 90W LED street light fittings and shifting to the new location and back filling the excavated area. |
| 18 | Erection of 9 Mtrs height Galvanized, Octagonal street lights poles with supply of 300mm long and 20mm dia GI foundation bolts and Template plate, work including fixing of single arm brackets and 90W LED street light fittings as a complete job. |
| 19 | Providing foundation for 9 mtrs Octagonal Poles including earth Excavation and making of RCC foundation using M20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. |
| 20 | Supplying, fixing and wiring earth electrode for panel using 40 mm dia, 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 15omm all-round with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. |
| 21 | Supplying and running GI strip for grounding connections, using necessary fixing materials as required. 25 x 6 mm GI strip |
| 22 | Supply of PTZ camera: 4MP 30fps, H.265,30X,200M IR, H265 compression Technology,30 fps@ 2560x1440,30x Optical Zoom, Auto focus,200M IR, weather proof IP66 rated, Vandal proof IK10 and NEMA 4x rated housing, -30°C-55°C wide Temperature Range for extreme weather conditions, IS (Electronic Stabilization) o control image stability,1year Warrantee with POE power adapter with STQC certifications. |
| 23 | Supply of Bullet camera: 6MP ,1/2.9” Progressive CMOS Sensor 30fps @ 2560x1920,60fps@1920x1080 smart stream III to Optimize band width Efficiency Built in IR illuminators, Effective up to 50 meters remote focus for easy Focus adjustments WDR Pro for Unparalleled visibility in High Contrast Environments weather proof IP66 rated and Vandal proof IK10 rated Metal housing SNV(Supreme Night Visibility) for low Light Conditions Video Rotation for corridor View DIS(Digital Image Stabilization) with POE & STQC certifications. |
| 24 | Supply of 64Channel 4SATA NVR 8MP (Network Video recorder) & 16TB Hard diskx4Nos including installation. |
| 25 | Supply of 55” LED Monitor with HDMI cable (20Mtr), Wireless mouse, Keyboard including installation. |
| 26 | Supply of 4+2 port Giga POE switch including installation. |
| 27 | Supply of 9Mtr HOT DIPPED GALVANIZED POLE with camera bracketsx29Nos for mounting with Top Arrester pole. |
| 28 | Supply of Outdoor pole rack 4U with power points, surge protector, clamping including installations. |
| 29 | Civil foundation for pole erection with civil works & basement foundation complete. |
| 30 | Supply & laying of outdoor Cat-6 cable with suitable HDPE-32MM pipe& terminations. |
| 31 | Supply of Client Radio Device 2x2 MIMO CPE & Installations. |
| 32 | Supply of 3Cx2.5sqmm PVC power cable, HDPE-32mm pipe including laying, digging trench complete. Please Enable Macros to View BoQ information |
