|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. As per DSR-2.6.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 2 | Filling of Carted earth in plinth in 20cm layer including leveling, dressing and watering and also including of supply of earth including carted loading & unloading as per direction of Engineer incharge... As per DSR-2.25(a) and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 3 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. As per DSR-4.1.8 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 4 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. As per DSR-2.27 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 5 | Providing and injecting chemical emulsion for pre constructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete.(plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution). As per DSR-2.35.3.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 6 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR-5.1.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 7 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR-5.1.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) above plinth to 5th floor |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete. As per DSR-5.9.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick As per DSR-5.9.21 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Columns,Pillars, Piers, Abutments, Posts and Struts. As per DSR-5.9.6 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Edges of slabs and breaks in floors and walls Under 20 cm wide. As per DSR-5.9.16.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 12 | M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. as per DSR - 6.1.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 13 | Providing and laying damp-proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). as per DSR - 4.10 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 14 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. as per DSR - 4.13 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 15 | M-150 brick work in 1:6 in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand) Ground Floor As per DSR-6.42 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 16 | M-150 brick work in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. Ground Floor As per DSR - 6.4.1. and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 17 | P/F Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. (Make steel primar source) As per DSR - 5.22.6 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 18 | 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 F.M. As per DSR - 13.5.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 19 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand Ground Floor As per DSR - 13.5.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 20 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 coarse sand. Ground Floor As per DSR 13.4.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 21 | Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required.. As per DSR - 5.30 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 22 | Supply and fixing 6 mm China white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm). As per DSR - 11.37 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 23 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). As per DSR 11.3.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 24 | Providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. . As per DSR 11.41.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 25 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 25 mm thick As per DSR 11.26.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 26 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. As per DSR-11.27 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 27 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick Single leaf As per DSR-9.20.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick Double leaf As per DSR-9.20.1+9.26 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 29 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of hold fast for door, chaukhats and windows. As per DSR - 10.10 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 30 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of door / windows grill.. As per DSR - 9.48.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 31 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work Z-Section steel windows with Openable panels, excluding Glass panes.. As per DSR - 10.11.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 32 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work Angle iron chaukhat (40x40x5) As per DSR - 10.13.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 33 | Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work M.S. SHEET DOOR As per MR and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 34 | Fixing of Door, windows / ventilators chaukhats in position Door chaukhats. As per MR and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 35 | Fixing of Door, windows / ventilators chaukhats in position Window chaukhats. As per MR and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 36 | Fixing of Door, windows / ventilators chaukhats in position Ventilator chaukhats. As per MR and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 37 | Steel Painting:Applying priming coat:(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.(b) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. As per DSR-13.62.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 38 | One priming coat of cement primer and Two coat oil distemper on new work including supply of all materials labour and tools and plants etc required for proper completion of the work As per DSR No. 13.41.1 and direction of E/I. and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 39 | Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. As per DSR 13.47.1 and direction of E/I. and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 40 | One priming coat of cement primer and Two coat oil distemper on new work including supply of all materials labour and tools and plants etc required for proper completion of the work Ceiling) As per DSR 13.41.1 and direction of E/I.(Including all taxes, Labour cess but exluding GST) |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As DSR 13.80 per direction of E/I. (Including all taxes, Labour cess but exluding GST) |
| 42 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All aboveAs per DSR 22.7.1 and direction of E/I. (Including all taxes, Labour cess but exluding GST) |
| 43 | Construction of apron drain along apron (150X150)MM As analysis of rate and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 44 | Providing and fixing Stainless steelsliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm. As per MR and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 45 | Providing and fixing Stainless steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete300 x 10mmAs per DSR 8.31 and direction of E/I. (Including all taxes, Labour cess but exluding GST) |
| 46 | Providing and fixing Stainless steelhandles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm. As per MR and direction of E/I. (Including all taxes, Labour cess but exluding GST) |
| 47 | Providing and fixing 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. As per DSR-14.34 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 48 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes As per DSR-10.30.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 49 | Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/ Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests As per DSR-17.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 50 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid As per DSR-17.2.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 51 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.. as per DSR-17.7.4 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 52 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board of size As per DSR-17.10.1.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia As per DSR-17.28.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 54 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm dia As per DSR-17.28.1.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 55 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-17.31 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 56 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per DSR-17.4.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 57 | Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shadeAs per DSR-8.10.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 58 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm nominal bore. As per DSR-17.16a and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 59 | Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per thedirection of Enginer-in-charge. 15mm dia nominal dia.. As per DSR-17.22b and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 60 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter. As per DSR 18.22.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 61 | Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. As per DSR-17.73.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 62 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms. As per DSR-17.71 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 63 | Providing and fixing Toilet paper holder C.P. brass As per DSR 17.34.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 64 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter As per DSR-12.41.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 65 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete As per DSR-12.22 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 66 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm As per DSR-12.43.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 67 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. As per DSR-12.44 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 68 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) As per DSR-19.2.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 69 | Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work. 110 mm O.D. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 70 | Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work. 90 mm O.D. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 71 | Supply and fixing of UPVC S.W.R. pipe nahni trap size 110x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 72 | Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 90 mm. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 73 | Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 110 mm. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 74 | Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735. Size 90x90x90 mm. As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 75 | SSupply and fixing of UPVC S.W.R. plain tee confirming to IS-14735. Size 110x110x110 mm As per NS and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 76 | Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. Exposed on wall 25mm dia nominal bore As per DSR-18.10.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 77 | Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality.25mm dia nominal bore. As per DSR-18.40.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 78 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes As per DSR-18.8.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.25mm dia nominal outer dia pipes As per DSR-18.7.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 15mm dia nominal outer dia pipesAs per DSR-18.8.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 20 mm dia nominal outer dia pipes As per DSR-18.8.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 25mm dia nominal outer dia pipes As per DSR-18.8.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 83 | Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore As per DSR-18.21.2.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 84 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore As per DSR-18.49.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 85 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore As per DSR-18.51.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 86 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore As per DSR-18.53.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 87 | Providing and fixing gun metal gate valve with wheel of approved quality.20mm dia nominal bore As per DSR-18.17.1a and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 88 | Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia nominal bore As per DSR-18.17.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 89 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25mm dia nominal bore As per DSR-18.18.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 90 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]. As per DSR-18.48 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 91 | Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter As per DSR-2.10.1.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 92 | Excavating trenches in all kinds of soil of required width for pipes. including excavation for sockets and dressing of sides, ramming of bottoms, including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m. up to 1.50 m depth Pipes 80 mm to 300 mm diameter As per DSR-19.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 93 | Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes . As per DSR-19.6.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 94 | Providing and laying cement concrete1:5:10(1cement:5coarse sand :10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. As per DSR-19.3.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 95 | Providing and fixing square-mouth S.W. gully trap grade‘A’ complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P typeWith Sewer bricks conforming to IS : 4885As per DSR-19.4.2.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 96 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). . As per DSR-19.7.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 97 | Size 90x80cm with With common burnt clay FPS (non modular) bricks of class designation 7.5.As per DSR-19.8.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 98 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar .As per DSR-19.15.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 99 | Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. As per DSR-19.16 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 100 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250mm diameter As per DSR-19.21.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 101 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. not exceeding 80mm dia. As per DSR-2.10.1.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 102 | Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 65mm nominal bore. As per DSR-18.12.7 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 103 | Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 50mm nominal bore. As per DSR-18.12.6 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 104 | Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work) 25mm nominal bore. As per DSR-18.12.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 105 | Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work. 65mm nominal bore. As per DSR-18.41.7 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 106 | Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work. 50mm nominal bore. As per DSR-18.41.6 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 107 | Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work. 25mm nominal bore. As per DSR-18.41.3 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 108 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.. 65mm nominal bore. As per DSR-18.17.5 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 109 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.. As per DSR-18.17.4 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 110 | Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.. As per DSR-18.17.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 111 | Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :With F.P.S. bricks As per DSR-18.32.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 112 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm dia nominal bore As per DSR-18.13.1 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 113 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm dia nominal bore As per DSR-18.13.2 and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 114 | Construction of Septic Tank Size :- Length = 2.65 M. Width = 1.10 Total Depth =3.00M including cost of labour and all material T&P etc complete as per TS drawing and design and direction of E/I |
| 115 | BOUNDARY WALL (0.450 MTR. EARTH FILLING) As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 116 | M.S. GATE As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 117 | Providing and fixing ball bearing for rolling shutters As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 118 | Bituminous Road As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 119 | INTERLOCKING ROAD As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 120 | HORTICULTURE As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 121 | DEMOLISH WORK As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) |
| 122 | India Marka Handpump As per TS Design & Drawing and Direction of E/I (Including all taxes, Labour cess but exluding GST) Please Enable Macros to View BoQ information |
